In general we want to support "idempotentcy" or "state
synchronization" across interruption. If a repo is only partially
created due to a crash or whatever, it's hard for a user to know that.
Let's just make `ostree_repo_create()` idempotent. Since all we're
doing is a set of `mkdirat()` invocations, it's quite simple.
This also involved porting to fd-relative, which IMO makes the
code a lot clearer.
Closes: #422
Approved by: 14rcole
In flatpak i was using a parent repo, and it failed to update
with ENOENT when dispatching an set-read-source opcode, because the
object it referenced was in the parent repo.
This fixes that by making _ostree_repo_read_bare_fd look
at parent_repo.
Closes: #362
Approved by: cgwalters
Import `gs_file_enumerator_iterate()` for the next six months or
so...after RHEL 7.3 is released I'm strongly considering hard
requiring 2.46 or so.
Likely at some point we should figure out how to share more "glib
backport" code with NetworkManager at least.
Closes: #341
Approved by: jlebon
The previous code was subject to a divide by zero if less than a
second had passed. Rework it so we only do the divide if more than a
second has passed.
Closes: #349
Approved by: Mathnerd314
I find the "-z2" is really a long ago relic of the past when I changed
the format. We no longer have anything to do with the original
`archive`, so let's start allowing people to type `--mode=archive`
which just looks saner.
At some point later I'll update the docs too, but it'll be an annoying
transition period as we'll have to say "On older OSTree, use -z2" etc.
Closes: #346
Approved by: giuseppe
Just noticed this while reading some code, we didn't have many manual
`out: close()` bits left, this pushes us over the edge to autocleanup
almost everywhere.
Closes: #332
Approved by: jlebon
As the docs say, `g_regex_match()` still allocates a match even if it
returns `FALSE`. Using `g_autoptr` is just plain better.
Closes: #292
Approved by: krnowak
This changes around a few things that didn't work for me:
* Section names seem to be ostree-* instead of libostree-*
* Also XML files are ostree-* (they didn't show up at all)
- gtk-doc doesn't seem to parse const _OSTREE_PUBLIC correctly
* pull documentation is now on the actual functions rather than stubs
* Update gitignore with some more files
And there some changes to make gtk-doc give fewer warnings (not finished)
Closes: #327
Approved by: cgwalters
This centralizes the ifdef's in one file, which will make it
easier to write new pull backends.
ostree-repo-pull.c is now built unconditionally
Closes: #327
Approved by: cgwalters
1 is a better choice than 0 because some programs use 0
as a special value; for example, GNU Tar warns of an
"implausibly old timestamp" with 0.
Closes: #330
Approved by: cgwalters
This kills another GSystem consumer...I think down the line I'd like
to do something like "detect whether file is > 1k if so, mmap,
otherwise just readall()" so we can use this helper in more places.
Closes: #319
Approved by: jlebon
We have a lot of "allow_noent" type wrapper functions since
a common pattern is to allow files to not exist, but still
throw cleanly on other issues.
This is another instance of that, and cleans up duplicated error
handling code.
Part of this is prep for moving away from `GFile` consumers.
Closes: #319
Approved by: jlebon
On 32-bit systems the modifier for printing 64bit values should be
%llu instead of %lu. Just use appriopriate macros that do the right
thing.
Closes: #329
Approved by: giuseppe
The "no atime" thing was mostly useful only before "relative atime"
updates landed. Users who care about performance will turn it off
entirely anyways.
Closes: #316
Approved by: jlebon
In addition to generic fd relative porting,
this is a necessary preparatory step for libglnx porting, because
when I tried to use `g_mapped_file_new` I hit an issue with
it using a different error domain from GIO.
Thankfully libglnx consistently uses the GIO error domain, and here
we're now using it for the `open()` call.
Closes: #317
Approved by: jlebon
Bug 765429 said that not having a time estimate can be annoying
when working with large pulls.
There isn't any complex time estimation logic here - we just take
the number of bytes remaining and do a linear projection of
the bytes per second rate at the current point in time.
Closes: #318
Approved by: cgwalters
This can be useful for validating the 3rd party data that is put in
the extensions directory and is signed with the same keys as commits
or the summary file.
Closes: #310
Approved by: cgwalters
Moved out setting up a GPG verifier to a separate function, as I would
like to use it for the any data verification function in the following
commit.
Closes: #310
Approved by: cgwalters
I plan to add a function for verifying any data which may return the
error about lack of trusted signatures, so let's avoid the redundancy
and put the check in the separate function.
Closes: #310
Approved by: cgwalters
Apparently I got the bracketing wrong in
862e6ecdcc58f025696b1394adfc0fcf7322df23:
src/libostree/ostree-repo.c: In function 'ostree_repo_delete_object':
src/libostree/ostree-repo.c:3538:11: warning: missing braces around
initializer [-Wmissing-braces]
g_auto(GVariantBuilder) builder = {0,};
Closes: #298
Approved by: cgwalters
This tries to avoid leaking GVariantBuilders and GVariants in some
situations. The leaks were usually happening when some error occurred
or because of unclear variant ownership situation.
The former is mostly about making sure that g_variant_builder_clear is
called on builders that didn't finish their variant building process.
The latter is surely more work - sometimes the result of
g_variant_builder_end() should not be passed directly to a function,
but rather stored in a g_autoptr(GVariant), sunk and then passed to a
function. IMO, with an advent of g_autoptr, GVariants should be always
sunk instead of relying on some receiver function sinking it. This
would make an easy-to-follow policy of always sinking your
variants. Functions could then assume that the passed variant is
already sunk. These leaks are still happenning in commands, but they
are less harmful, since that code will not be used by some daemon as a
library routine.
Closes: #291
Approved by: cgwalters
This adds a _with_options variant of the
ostree_repo_remote_fetch_summary function, so we can tell the fetcher
to use a specific URL instead taking it from the remote config.
Closes: #290
Approved by: cgwalters
The base URI created in this line was always (sans erroneous
situations) overwritten in the code block below without freeing it
previously, so it leaked.
Closes: #290
Approved by: cgwalters
It's very useful for third-party applications to have someplace to store
their data guaranteed to be on the same device as the repo (thus
ensuring hardlinks) while still being shielded away from any of OSTree's
timely garbage collections.
We create a new "extensions/" subdirectory where apps can include
whatever they wish in "extensions/myapp/". This subdirectory is
completely unmanaged by ostree.
NB: I didn't bother making it a member of the OstreeRepo proper since we
don't really use it for anything else yet.
Closes: #286
Approved by: cgwalters
I ended up deciding to move this one into libglnx, seems like
something other libglnx-using software might want to do, even though
xdg-app doesn't right now.
Closes: #282
Approved by: jlebon
We were arbitrarily only deleting content after exactly one day. Some
use cases may want something else; make it configurable.
Closes: #170
Approved by: jlebon
We had a policy of cleaning up all files in `$repo/tmp` older
than one day, but we should really clean up previous bootid staging
directories too, as they can potentially take up a lot of disk space.
https://bugzilla.gnome.org/show_bug.cgi?id=760531Closes: #170
Approved by: jlebon
Setting this causes commit to error out. There are other ways we
could do this in a more sophisticated fashion, such as via SystemTap
etc. But this has low-tech applicablity, works as non-root.
The reason I'm adding this is so that we can add test cases for
cleanup of the `tmp/staging-` directory.
Closes: #170
Approved by: jlebon
I have a cache drive I often mount read-only, and the previous commit
for opening `tmp/cache` broke since `errno == EROFS`, not `EPERM`.
It turns out we already had the concept of a "writable" repo, so just
piggy back off that.
Closes: #281
Approved by: giuseppe
To GLnxConsoleRef. There were some subtleties here, for example we
used to reference `GSConsole` inside the progress changed function,
which at first seems like an ABI hazard, because e.g. rpm-ostree or
xdg-app could still be passing a `GSConsole` instance there. Luckily,
it turns out to be compatible to just start calling libglnx here.
Another issue was that due to libglnx's use of the cleanup function,
we needed to ensure we always called `ostree_async_progress_finish()`
*before* the cleanup function was invoked.
Closes: #280
Approved by: giuseppe
In the case we have a repo with a parent, and the child repo has a
remote called "foo", but some option is unset. Then when we look up
the parent repo for a value before using the default we will fail due
to the parent not having the "foo" remote. As soon as we find the
requested remote at some point in the hierarchy we need to ignore further
errors and use the default value.
Closes: #274
Approved by: giuseppe
We looked for and locked old temporary directories so we can
reuse them if not in use. However, once we found one that
we can reuse we didn't stop iterating, and eventually we
reached the end. This means we can lock multiple dirs.
Closes: #273
Approved by: giuseppe
There was some leftover intermediate cruft here I noticed
while reviewing another patch:
- We had an output `GFile*` for that was never used
- We required the caller to allocate the loose pathbuf, but
none of them ever reused it
- We had an extra intermediate function
Also while looking at this, I'm now uncertain whether some of the
callers of `_ostree_repo_has_loose_object` should really be invoking
`ostree_repo_has_object()`, but let's leave that aside for now.
Closes: #272
Approved by: alexlarsson
Colin Walters
Dan Nicholson
Alexander Larsson
Mathnerd314
Krzesimir Nowak
Sam Spilsbury
Jonathan Lebon