Define an `OstreeKernelArgsEntry` structure, which holds
both the key and the value. The kargs order array stores
entries for each key/value pair, instead of just the keys.
The hash table is used to locate entries, by storing
entries in a pointer array for each key. The same public
interface is preserved, while maintaining ordering
information of each key/value pair when
appending/replacing/deleting kargs.
Fixes: #1859
Prep for fsverity, where I want to create a new group
`[fsverity]` in the keyfile that has default values. We should
treat the absence of a group the same as absence of a key
in these "with defaults" APIs.
When copying the tree, using musl and GNU coreutils, something gets confused
when setting the ownership of symlinks and the copy fails with:
cp: failed to preserve ownership for osdata-devel/bin: Not supported
Rework using tar to avoid the problem.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
When building with musl there's no locale command, also its default
locale is C.UTF-8, so just get C.UTF-8 if we can't find locale.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
When using musl, it appears that the default is line buffered output, so
when `head -1` reads from a pipe we have to handle the source end of the
pipe getting EPIPE.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
A number of tests expect explicit left/right single quotes in their
messages, which will never happen in the C locale. Change so we pick a
likely UTF-8 locale, or fail if we can't find one.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
To allow for FIPS mode, we need to also install the HMAC file from
`/usr/lib/modules` to `/boot` alongside the kernel image where the
`fips` dracut module will find it. For details, see:
https://github.com/coreos/fedora-coreos-tracker/issues/302
Note I didn't include the file in the boot checksum since it's itself a
checksum of the kernel, so we don't really gain much here other than
potentially causing an unnecessary bootcsum bump.
If we are built without libarchive support, this test fails:
error: This version of ostree is not compiled with libarchive support
...
ERROR: tests/test-export.sh - too few tests run (expected 5, got 0)
ERROR: tests/test-export.sh - exited with status 1
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Tiny release. Just want to get out the important bugfixes instead of
backporting patches (notably the gpg-agent stuff and
`ostree-finalize-staged.service` ordering).
Closes: #1927
Approved by: cgwalters
The ostree fsck test is aimed to check that it will still fail an fsck
if the repository has been repaired by fsck. It also checks that a
pull operation corrects the error and ostree fsck will exit with zero.
The test was modeled after the following script:
rm -rf ./f1
mkdir -p ./f1
./ostree --repo=./f1 init --mode=archive-z2
mkdir -p ./trial
echo test > ./trial/test
./ostree --repo=./f1 commit --tree=dir=./trial --skip-if-unchanged --branch=exp1 --subject="test Commit"
rm -rf ./f2
mkdir -p ./f2
./ostree --repo=./f2 init
./ostree --repo=./f2 pull-local ./f1
echo whoops > `find ./f2 |grep objects |grep \\.file `
./ostree fsck --repo=./f2 ; echo Exit: $?
./ostree fsck --delete --repo=./f2 ; echo Exit: $?
./ostree fsck --repo=./f2 ; echo Exit: $?
./ostree --repo=./f2 pull-local ./f1
./ostree fsck --repo=./f2 ; echo Exit: $?
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
fsck: Update test so that it will pass on fs without xattrs
The fsck test does not require xattrs to prove that it works. It is
simple enough to change it to use an archvie instead of a bare type
repository.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Closes: #1910
Approved by: cgwalters
If there are different deployments for the same commit version, the BLS
snippets will have the same title fields (but different version fields):
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree)
But bootloaders could expect the title field to be unique for BLS files.
For example, the zipl bootloader used in the s390x architecture uses the
field to name the boot sections that are created from the BLS snippets.
So two BLS snippets having the same title would lead to zipl failing to
create the IPL boot sections because they would have duplicated names:
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Error: Config file '/etc/zipl.conf': Line 0: section name 'TestOS 42 20190902.0 (ostree)' already specified
Avoid this by always including the deployment index along with the commit
version in the title field, so this will be unique even if there are BLS
files for deployments that use the same commit version:
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree:2)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree:1)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree:0)
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Building bootmap in '/boot'
Building menu 'zipl-automatic-menu'
Adding #1: IPL section 'TestOS 42 20190902.0 (ostree:0)' (default)
Adding #2: IPL section 'TestOS 42 20190902.0 (ostree:1)'
Adding #3: IPL section 'TestOS 42 20190902.0 (ostree:2)'
Preparing boot device: dasda (0120).
Done.
Closes: #1911
Approved by: cgwalters
We would stop passing through `--` and args after it to the underlying
command in `ostree_run`. This made it impossible to use `--` to tell the
parser that following args starting with `-` really are positional.
AFAICT, that logic for `--` here came from a time when we parse options
manually in a big loop, in which case breaking out made sense (see
97558276e4).
There's an extra step here, which is that glib by default leaves the
`--` in the list of args, so we need to take care to remove it from the
list after parsing.
Closes: #1898Closes: #1899
Approved by: rfairley
This skips creating the default stuff in the physical sysroot.
I don't recall why I did that to be honest; it originated with
the first commit of this file. It might not have ever been
necessary.
In any case, it's not necessary now with Fedora CoreOS, so
prune it and let's have a clean `/`.
Keep the old behavior by default though to avoid breaking anyone.
Closes: #1894
Approved by: ajeddeloh
`ostree_repo_resolve_keyring_for_collection()` function fail the tests
if there is no GPG support.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
Skip tests or run them without GPG-related functionality if GPGME
wasn't enabled in a build time.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
Shell function `has_gpgme` shouldn't exit if GPG support is not detected
since it stop any test with error.
Added function `skip_without_gpgme` to skip the whole test if it is
useless without GPG support
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
There's a valid use case for enabling the timestamp downgrade check
while still also using override commits.
We'll make use of this in Fedora CoreOS, where the agent specifies the
exact commit to upgrade to, while still enforcing that it be newer.
Closes: #1891
Approved by: cgwalters
The ability to expire subkeys using gpg's --quick-set-expire is only
available on gnupg 2.1.22. If expiring a subkey fails, assume this is
why and skip the tests that require it but run the actions that the
subsequent tests depend on. This was failing on the Debian Stretch CI
tests since stretch has gnupg 2.1.18.
Closes: #1892
Approved by: jlebon
This wasn't available when I originally wrote this, but it ensures that
the running gpg-agent in tmpgpghome is killed in case the tests exit
early.
Closes: #1892
Approved by: jlebon
Recent GJS changed how byte arrays are unpacked with some assumptions
that they are likely strings. Manually use get_child_value() and
get_byte() to ensure the correct value is parsed when checking the
`ostree.sizes` metadata.
The upstream test is currently passing fine with GJS 1.56.2, but at
Endless we (unfortunately) have a downstream change that adds the object
type as an additional byte in the array. This is parsed incorrectly by
`deep_unpack()`. We can carry this patch downstream, but this change
makes the test more robust regardless.
Closes: #1884
Approved by: cgwalters
The GIR for commit_transaction() only has a single argument for the
GCancellable. Calling it with 2 arguments prints a GJS warning:
Gjs-Message: 15:37:40.287: JS WARNING: [/home/dan/src/ostree/tests/test-sizes.js 56]: Too many arguments to method OSTree.Repo.commit_transaction: expected 1, got 2
Currently this is harmless, but it could become a hard error in GJS at
some point.
Closes: #1884
Approved by: cgwalters
Add `libtest_cleanup_gpg()` to the array of commands to run when
exiting. This provides 2 improvements:
1. You don't need to worry about whether the test will spawn a gpg-agent
and therefore require adding a call to `libtest_cleanup_gpg()`.
2. All the existing users were calling `libtest_cleanup_gpg()` at the
end of the script. If there was a failure and the script exited
early, then it wouldn't cleanup and there may be a stray gpg-agent
hanging around.
Closes: #1799
Approved by: cgwalters
Currently if a test script adds a trap on `EXIT` to run some cleanup, it
will stomp on the existing trap to run `save_core()`. Allow for scripts
to append actions that will run on exit by introducing an array that
will be iterated over by a single exit runner.
Closes: #1799
Approved by: cgwalters
Extend test-gpg-signed-commit.sh to test various key states. If gpg is
found that supports the required options, keys will be generated on the
fly and changed in various ways to exercise the output from
`ostree_gpg_verify_result_describe_variant` used in `ostree show`.
I tested this using gnupg 2.2.12, so I hope it works well enough on
various gpgs found in the wild.
Closes: #1872
Approved by: cgwalters
In case the tests want to use a custom GPG homedir, allow passing in the
homedir to use when cleaning up a running gpg-agent.
Closes: #1872
Approved by: cgwalters
Introduce a new signature attribute for the key expiration timestamp and
display it when the key has a non-zero expiration time. Without this,
the error shown is `BAD signature`, which isn't correct.
Closes: #1872
Approved by: cgwalters
This change makes public the current kargs API in src/libostree/ostree-kernel-args.c
and adds documentations.
Upstreams the new kargs API from rpm-ostree/src/libpriv/rpmostree-kargs-process.c
Merges libostree_kernel_args_la_SOURCES to libostree_1_la_SOURCES in Makefile-libostree.am
Upstreams tests/check/test-kargs.c from rpm-ostree.
Closes: #1833Closes: #1869
Approved by: jlebon
Currently if you want to update a non-alias ref, you need to first check
if it exists and use either `ostree refs --create` or `ostree reset` as
appropriate. That's unnecessarily complicated and is much less
convenient than the old `write-refs` builtin that simply called
`ostree_repo_set_ref_immediate()` without any checks.
Add a `--force` option to be used with `--create` that does not raise an
error when the destination ref already exists.
Closes: #1870
Approved by: jlebon
Split the creation of the directory containing grub.cfg, and the creation
of the file, so that a failure in the mkdir command will fail the test
and not attempt the touch command.
Closes: #1831
Approved by: jlebon
Fix CI failure due to mismatching quotes in the error output given
between Fedora and Debian test suites.
Example of the error in Debian Stretch:
https://api.travis-ci.org/v3/job/519335717/log.txtCloses: #1839
Approved by: cgwalters
When writing a delta to a file this may not always be recorded
in the filename, and it's useful data.
Ref: https://mail.gnome.org/archives/ostree-list/2019-February/msg00000.html
This also required teaching `show` to accept a file path.
Note...for some reason `test-deltas.sh` breaks when run from
a tty - we get `SIGTTIN` which implies something is reading from
the tty but it wasn't obvious to me what.
Closes: #1823
Approved by: jlebon
In Silverblue right now, the boot menu title looks like this:
Fedora 29.20190301.0 (Workstation Edition) 29.20190301.0 (ostree)
This is because RPM-OSTree's `mutate-os-release` feature is enabled,
which injects the OSTree version string directly into `VERSION` and
`PRETTY_NAME`. So appending the version string again is a bit redundant.
Let's just do a simple substring check here before adding the version to
the title.
Closes: #1829
Approved by: cgwalters
The sysroot.bootloader key configures the bootloader
that OSTree uses when deploying a sysroot. Having this key
allows specifying behavior not to use the default bootloader
backend code, which is preferable when creating a first
deployment from the sysroot (#1774).
As of now, the key can take the values "auto" or "none". If
the key is not given, the value defaults to "auto".
"auto" causes _ostree_sysroot_query_bootloader() to be used
when writing a new deployment, which is the original behavior
that dynamically detects which bootloader to use.
"none" avoids querying the bootloader dynamically. The BLS
config fragments are still written to
sysroot/boot/loader/entries for use by higher-level software.
More values can be supported in future to specify a single
bootloader, different behavior for the bootloader code, or
a list of bootloaders to try.
Resolves: #1774Closes: #1814
Approved by: jlebon
Add ot_keyfile_get_value_with_default_group_optional() which allows
getting values from keys where the group is optional in the config
file. This is preparatory to add the sysroot.bootloader repo config
key, where the sysroot group is optional.
Closes: #1814
Approved by: jlebon
Currently it's not an error to provide too many arguments to an ostree
config command. Change it so we print usage information in that case,
and update the unit tests.
Closes: #1743
Approved by: cgwalters
Currently there's a way to set a key to the empty string but there's no
way to unset it completely (remove the key from the group). This might
be helpful for instance if you want to temporarily set
"core.lock-timeout-secs" to a specific value for the duration of one
operation and then return it to the default after that operation
completes.
This commit implements an "unset" operation for the config command, adds
a unit test, and updates the man page.
Closes: #1743
Approved by: cgwalters
Since commit a06bd82cd we no longer use OVERLAYFS_SUPER_MAGIC or
statfs() so remove the includes for linux/magic.h and sys/vfs.h
Closes: #1815
Approved by: cgwalters
glib 2.59.2 uses a non-breaking space instead of a space to
separate the quantity and unit in g_format_size() so update
our test to handle both a plain space and a non-breaking space.
See https://gitlab.gnome.org/GNOME/glib/issues/1625Closes: #1818
Approved by: cgwalters
OSTree's P2P support used to be a compile time option but is now always
enabled. One of the tests was still checking for the old feature flag,
"experimental", which has been renamed to "p2p" and skipping for that
reason. Delete the check so the test always runs.
Closes: #1804
Approved by: pwithnall
This uses the OSTREE_REPO_REMOTE_CHANGE_REPLACE operation to add a
remote or replace an existing one. This is roughly the opposite of
--if-not-exists and will raise an error if both options are passed.
Closes: #1166
Approved by: cgwalters
Add the OSTREE_REPO_REMOTE_CHANGE_REPLACE operation to the
OstreeRepoRemoteChange enum. This operation will add a remote or replace
an existing one. It respects the location of the remote configuration
file when replacing and the remotes config dir settings when adding a
new remote.
Closes: #1166
Approved by: cgwalters
We want a case where we can disable the min-free-space check. Initially,
it felt like to add a OSTREE_REPO_PULL_FLAGS_DISABLE_FREE_SPACE_CHECK but
the problem is prepare_transaction() does not have a OstreeRepoPullFlags
parameter which we can parse right here. On top of it, prepare_transaction()
enforces min-free-space check and won't let the transaction proceed if
the check failed.
This is pretty bad in conjunction with "inherit-transaction" as what
Flatpak uses. There is no way to disable this check unless we remove
it altogether from prepare_transaction.
This issue came out to light when flatpak wasn't able to write metadata
after fetching from remote:
[uajain@localhost ~]$ flatpak remote-info flathub org.kde.Platform//5.9
error: min-free-space-size 500MB would be exceeded
Metadata objects helps in housekeeping and restricting them means
restricting crucial UX (like search, new updates) functionalities
in clients like gnome-software. The error banners originated from
these issues are also abrupt and not much helpful to the user. This
is the specific instance of the issue this patches tries to address.
See https://github.com/flatpak/flatpak/issues/2139 for discussion.
Closes: #1779
Approved by: mwleeds
This allows specifying gpgpath as list of
paths that can point to a file or a directory. If a directory path
is given, paths to all regular files in the directory are added
to the remote as gpg ascii keys. If the path is not a directory,
the file is directly added (whether regular file, empty - errors
will be reported later when verifying gpg keys e.g. when pulling).
Adding the gpgkeypath property looks like:
ostree --repo=repo remote add --set=gpgpath="/path/key1.asc,/path/keys.d" R1 https://example.com/some/remote/ostree/repoCloses#773Closes: #1773
Approved by: cgwalters
I found this useful while hacking on rpm-ostree but I think it might be
useful enough to upstream. This stat is really helpful for validating
that a pipeline is hitting the devino cache sweet spot.
Closes: #1772
Approved by: cgwalters
It might be "local", but e.g. we may be crossing filesystems. So there
are valid use cases for only wanting to pull the commit metadata with
`pull-local`.
Closes: #1769
Approved by: cgwalters
This is the alias version of #1749. I.e. we want to make sure that one
can't even create an alias which would end up dangling.
See also: https://pagure.io/releng/issue/7891Closes: #1768
Approved by: sinnykumari
if a file ".wh..wh..opq" is present in a directory, delete anything
from lower layers that is already in that directory.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1486
Approved by: cgwalters
Rather than manually starting the `ostree-finalize-staged.service` unit,
we can leverage systemd's path units for this. It fits quite nicely too,
given that we already have a path we drop iif we have a staged
deployment.
To give some time for the preset to make it to systems, we don't yet
drop the explicit call to `systemctl start`. Though we do make it
conditional based on a DEBUG env var so that we can actually test it in
CI for now. Once we're sure this has propagated, we can drop the
`systemctl start` path and the env var together.
Closes: #1740
Approved by: cgwalters
Actually testing the patch to add `--force-copy-zerosized` to
rpm-ostree tripped over the fact that it uses `--union-identical`,
and we just hit an assertion failure with that combination.
Fix this by copying over the logic we have for the hardlink case.
Closes: #1753
Approved by: jlebon
In rpm-ostree we've hit a few cases where hardlinking zero-sized
files causes us problems. The most prominent is lock files in
`/usr/etc`, such as `/usr/etc/selinux/semanage.LOCK`. If there
are two zero-sized lock files to grab, but they're hardlinked,
then locking will fail.
Another case here is if one is using ostree inside a container
and don't have access to FUSE (i.e. `rofiles-fuse`), then the
ostree hardlinking can cause files that aren't ordinarily hardlinked
to become so, and mutation of one mutates all. An example where
this is concerning is Python `__init__.py` files.
Now, these lock files should clearly not be in the tree to begin
with, but - we're not gaining a huge amount by hardlinking these
files either, so let's add an option to disable it.
Closes: #1752
Approved by: jlebon
Deleting a ref with aliases makes them dangling. In such
cases, display an error message to the user.
Fixes#1597
Signed-off-by: Sinny Kumari <sinny@redhat.com>
Closes: #1749
Approved by: cgwalters
There are use cases for libostree as a local content store
for content derived or delivered via other mechanisms (e.g. OCI
images, RPMs, etc.). rpm-ostree today imports RPMs into OSTree
branches, and puts the RPM header value as commit metadata.
Some of these can be quite large because the header includes
permissions for each file. Similarly, some OCI metadata is large.
Since there's no security issues with this, support committing
such content.
We still by default limit the size of metadata fetches, although
for good measure we make this configurable too via a new
`max-metadata-size` value.
Closes: https://github.com/ostreedev/ostree/issues/1721Closes: #1744
Approved by: jlebon
Copying the xattrs on metadata objects is wrong in general, we
don't "own" them. Notably this would fail in the situation of
doing a pull from e.g. a `bare-user` source to a destination
that was on a different mount point (so we couldn't hardlink),
and the source had e.g. a `security.selinux` attribute.
Closes: #1734Closes: #1736
Approved by: jlebon
Fetching value from a repo config using 'ostree config
get SECTIONNAME.KEYNAME' didn't work in some cases like
when having dots in Group Name entry.
As per Desktop entry file specification, Group Name
may contain all ASCII characters except for [ and ]
and control characters.
Link - https://specifications.freedesktop.org/desktop-entry-spec/desktop-entry-spec-1.1.html
Having --group option will help user to clearly specify
Group Name and get desired result.
It also adds test for ostree config get|set and bash
completion for --group option
Fixes https://github.com/ostreedev/ostree/issues/1565Closes: #1696
Approved by: cgwalters
Add an invalid-cache test error flag to ensure that the code that checks
for and recovers from a corrupted summary cache is hit. This helps make
sure that the recovery path is actually used without resorting to
G_MESSAGES_DEBUG.
Closes: #1698
Approved by: cgwalters
There have been subtle bugs in the past when a client pulls while the
remote server is updating the summary. The client may get the old
summary and new signature or vice versa. Add tests to simulate this
behavior to make sure there aren't regressions in the future.
Closes: #1698
Approved by: cgwalters
Mildly bikeshed, though I find the name `auto-update-summary` to be
easier to grok than `change-update-summary`. I think it's because it can
be read as "verb-verb-noun" rather than "noun-verb-noun".
Closes: #1693
Approved by: mwleeds
This commits adds and implements a boolean repo config option called
"change-update-summary" which updates the summary file every time a ref
changes (additions, updates, and deletions).
The main impetus for this feature is that the `ostree create-usb` and
`flatpak create-usb` commands depend on the repo summary being up to
date. On the command line you can work around this by asking the user to
run `ostree summary --update` but in the case of GNOME Software calling
out to `flatpak create-usb` this wouldn't work because it's running as a
user and the repo is owned by root. That strategy also means flatpak
can't update the repo metadata refs for fear of invalidating the
summary.
Another use case for this relates to LAN updates. Specifically, the
component of eos-updater that generates DNS-SD records advertising ostree
refs depends on the repo summary being up to date.
Since ostree_repo_regenerate_summary() now takes an exclusive lock, this
should be safe to enable. However it's not enabled by default because of
the performance cost, and because it's more useful on clients than
servers (which likely have another mechanism for updating the summary).
Fixes https://github.com/ostreedev/ostree/issues/1664Closes: #1681
Approved by: jlebon
For `rpm-ostree ex livefs` we have a use case of pushing a rollback
deployment. There's no reason this should require deleting the staged
deployment (and doing so actually breaks livefs which tries to access
it as a data source).
I was initially very conservative here, but I think it ends up
being fairly easy to retain the staged deployment. We need to handle
two cases:
First, when the staged is *intentionally* deleted; here, we just need
to unlink the `/run` file, and then everything will be sync'd up after
reloading.
Second, (as in the livefs case) where we're retaining it,
e.g. adding a deployment to the end. What I realized here is that
we can have the code keep `new_deployments` as view without staged,
and then when we do the final reload we'll end up re-reading it from
disk anyways.
Closes: #1672
Approved by: jlebon
This runs a test involving many retries for the --network-retries
option directly rather than inside a conditional statement, so that
the command does not silently fail and allow the test to continue
running.
Closes: #1673
Approved by: jlebon
This exposes a way to specify from the command line the number
of times to retry each download after a network error. If a negative
value is given, then the default number of retries (5) is used. If 0
is given, then errors are returned without retrying.
closes#1659Closes: #1669
Approved by: jlebon
This moves the assert_fail function definition which was defined
and called in tests/test-remote-headers.sh. Done in preparation
for use of the assert_fail function in other test files.
Closes: #1669
Approved by: jlebon
One gotcha here is that we don't invalidate the RPMs if we're not
sitting on the same commit anymore. Shouldn't be too hard to fix, though
let's at least make a note of it for now.
Closes: #1668
Approved by: cgwalters
Currently the BLS snippets are named ostree-$ID-$VARIANT_ID-$index.conf,
but the BLS config files are actually sorted by using the version field
which is the inverse of the index.
In most places, _ostree_sysroot_read_boot_loader_configs() is used to
get the BLS files and this function already returns them sorted by the
version field. The only place where the index trailing number is used is
in the ostree-grub-generator script that lists the BLS files to populate
the grub config file.
But for some bootloaders the BLS filename is the criteria for sorting by
taking the filename as a string version. So on these bootloaders the BLS
entries will be listed in the reverse order.
To avoid that, change the BLS snippets filename to have the version field
instead of the index and also to have the version before deployment name.
Make the filenames to be of the form ostree-$version-$ID-$VARIANT_ID.conf
so the version is before the deployment name.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Closes: #1654
Approved by: cgwalters
And also print out the output if it still didn't start up in case there
are error messages hidden in there.
This should hopefully help with diagnosing the flakes we've been seeing
in starting it up.
Closes: #1652
Approved by: cgwalters
Systemd units using ConditionNeedsUpdate run if the mtime of .updated in
the specified directory is newer than /usr. Since /usr has an mtime of
0, there's no way to have an older .updated file. Systemd units
typically specify ConditionNeedsUpdate=/etc or ConditionNeedsUpdate=/var
to support stateless systems like ostree.
Remove the file from the new deployment's /etc and the OS's /var
regardless of where they came from to ensure that these systemd units
run when booting new deployments. This will provide a method to run
services only on upgrade.
Closes: #1628https://bugzilla.gnome.org/show_bug.cgi?id=752950Closes: #1631
Approved by: cgwalters
Similar to min-free-space-percent but it supports specific sizes
(in MB, GB or TB). Also, making min-free-space-percent and -size
mutually exclusive.
min-free-space-percent does not give a fine tuning of the free disk
space that a user might decide to keep. It can translate to very large
size (e.g. 1% = ~10GB on 1TB HDD) or very small (e.g. 1% = ~330MB on 32GB
system like Endless devices). Hence, it makes sense to introduce a config
option to honor specific size as per the user.
Closes: #1616
Approved by: jlebon
Colin Walters
Robert Fairley
Alex Kiernan
Jonathan Lebon
Jason Wessel
Javier Martinez Canillas
Denis Pynkin
Dan Nicholson
Allen Bai
Rafael Fonseca
Tristan Van Berkom
Matthew Leeds
Robert Fairley
Jeremy Bicha
Umang Jain
Luca Bruno
Giuseppe Scrivano
Sinny Kumari
William Manley