In the production case since we used `daemon()` our stderr is `/dev/null`¹
there's not much use in logging errors from `FITHAW` or `exit(1)`, and doing so
breaks the test suite which checks the return from `waitpid()`. There's nothing
we can really do if `FITHAW` fails, and in most of those cases `EINVAL`,
`EOPNOTSUPP`, we *shouldn't* do anything anyways.
¹ Though perhaps we should set up the systemd journal, but let's not
go there right now.
Closes: #1084
Approved by: jlebon
I added `waitpid()`, but that didn't actually help because we were
`daemon()`izing. Don't daemonize if we're testing so that we can `waitpid()`.
Note I still haven't reproduced this race locally, but I'm pretty sure this will
fix it.
While here, actually check the return value from `waitpid()` just in case
something goes wrong there.
Closes: #1084
Approved by: jlebon
Just a random cozy patch I made while perusing the codebase. When
determining if two OstreeDeployment objects are the same, rather than
just checking for NULL, we can just directly check for equality of
pointers to also catch the trivial case.
Closes: #1082
Approved by: cgwalters
This is mostly the `copy_file_range` changes plus the Coverity files.
```
Colin Walters (4):
localalloc: Abort on EBADF from close() by default
local-alloc: Remove almost all macros like glnx_free, glnx_unref_variant
console: Fix Coverity NULL deref warning
fdio: Merge systemd code to use copy_file_range(), use FICLONE
Jonathan Lebon (1):
console: trim useless check
Matthew Leeds (1):
dirfd: Fix typo in comment
Philip Withnall (1):
glnx-console: Add missing NULL check before writing out text
```
Update submodule: libglnx
Closes: #1081
Approved by: jlebon
This essentially completes our fd-relative conversion.
While here, I cleaned up the semantics of `ostree_repo_create()` and
`ostree_repo_create_at()` to be more atomic - basically various scripts were
testing for the `objects` subdirectory, so let's formalize that.
Closes: #820
Approved by: jlebon
If one of the localcache repos has the exact same commit we resolved
from the remote, then we need to make sure to mark it as partial so that
we download the full tree.
Closes: #1074Closes: #1076
Approved by: cgwalters
Saw this in a PR result; we need to wait for the child to have written its
result to stderr before we exit, otherwise the test suite may not read it in
time.
Closes: #1070
Approved by: jlebon
This will allow us to drop the awful hack in rpm-ostree where we watch our own
stdout. In general, libraries shouldn't write to stdout.
Also we can kill the systemd journal wrapper code. There's some duplication at
each call site now...but it's easier than trying to write a `sd_journal_send()`
wrapper.
I was originally going to have this emit all of the structured data too as a
`GVariant` but decided it wasn't worth it right now.
Closes: #1052
Approved by: jlebon
Add a new error domain for GPG signing/verification errors, and use it
throughout libostree for describing verification errors. This replaces
various uses of G_IO_ERROR_FAILED, and one instance of
G_IO_ERROR_NOT_FOUND (for which some code in ot-builtin-show.c had to be
changed to ensure it was still handled correctly).
The use of a separate error domain allows failures in GPG operations to
be handled separately from network failures (where the summary file
could not be found to be downloaded, for example) or timeouts.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1064Closes: #1071
Approved by: mbarnes
I'd like to move the new canonical kernel directory to `/usr/lib/modules/$kver`,
as Fedora has done. The `get_kernel_from_tree()` function now abstracts over
parsing the data (src vs destination filenames, as well as checksum) in
preparation for adding the new case.
In preparation for this, let's change the current test suite to use the
*current* directory of `/usr/lib/ostree-boot`, and also add coverage of `/boot`.
Closes: #1053
Approved by: jlebon
When returning results from finding repos, set gpg-verify-summary=false
in their configs, since any pulls from such remotes will necessarily
involve collection IDs, and hence should be using the unsigned summary
support. In the intended deployment mode for P2P transmission of OSTree
refs, summaries *cannot* be signed, so setting gpg-verify-summary=true
would cause all the pulls to fail.
The unsigned summary support is the move of repository metadata from
the summary file (not spliceable) to the well-known ostree-metadata ref
(spliceable, as it can exist for multiple collection IDs in the same
repository).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1066
Approved by: cgwalters
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
The API for downloading a summary file can legitimately return NULL for
the summary file contents when it returns TRUE (success). This indicates
an error 404 — the summary file was not found.
Two call sites were not handling that correctly, which was causing later
assertion failures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1061Closes: #1065
Approved by: cgwalters
(remaining > 0) is asserted by the loop condition, and remaining is not
modified between that check and the G_UNLIKELY — so the condition in the
G_UNLIKELY will always be true.
Spotted by Coverity as issue #1452617.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1059
Approved by: cgwalters
summary_timestamp is checked for non-NULL-ness above, and the function
bails if it’s NULL.
Fixes Coverity issue #1452616.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1059
Approved by: cgwalters
This parallels ostree_repo_remote_list_refs(), but returns a map of
OstreeCollectionRef → checksum, and includes refs from collection IDs
other than the remote repository’s main collection ID.
Use this in OstreeRepoFinderConfig to ensure that refs are matched
against even if they’re stored in the repository summary file’s
collection map, rather than its main ref map. This fixes false negatives
when searching for refs in some situations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
This catches a few failure modes in the pull code a little earlier,
before the incorrectly-NULL repo makes its way into a closure and a
worker thread, where the cause of the problem is harder to track down.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
As the comment explains, it’s possible for a result to be freed while
ref_to_checksum is NULL, even though normally the data structure
guarantees it’s non-NULL. This was causing crashes when results were
filtered out of a find-remotes call. Guard against that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
The intended behaviour of ostree_repo_find_remotes() is to return
results which have the latest version of at least one of the requested
refs. Results which have some of the requested refs, but don’t have the
latest version of any of them, should be ignored. The logic to do this
was broken in the case that a result contained a positive number of the
requested refs, but none of them were the latest version. (It previously
worked when the result contained none of the requested refs.)
Fix the counting to work correctly in both cases.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
If a delta happens to have zero objects, we could end up doing
a divide-by-zero when inferring endianness. In practice,
a zero-object delta isn't possible to generate I think, but
let's make sure the code is defensive all the same.
Spotted by Coverity.
Coverity CID: 1452208
Closes: #1041
Approved by: pwithnall
Part of cleaning up our usage of libglnx; we want to use what's in GLib where we
can.
Had to change a few .c files to `#include ostree.h` early on to pick up
autoptrs for the core types.
Closes: #1040
Approved by: jlebon
There are multiple use cases where we'd like to alias refs.
First, having a "stable" alias which gets swapped across major
versions: https://pagure.io/atomic-wg/issue/228
Another case is when a ref is obsoleted;
<https://pagure.io/atomic-wg/issue/303>
This second one could be done with endoflife rebase, but I think
this case is better on the server side, as we might later change
our minds and do actual releases there.
I initially just added some test cases for symlinks in the `refs/heads` dir to
ensure this actually works (and it did), but I think it's worth having APIs.
Closes: #1033
Approved by: jlebon
I plan to at some point change rpm-ostree to read the journal messages from
libostree and render things like the time we spent in syncfs().
Closes: #1044
Approved by: jlebon
Define typedefs for read/write archives, and use the GLib
autocleanups for them. Prep for updating libglnx to drop its
custom autocleanup macros.
Closes: #1042
Approved by: jlebon
Prep for dropping `GLNX_DEFINE_CLEANUP_FUNCTION` from libglnx
in favor of using GLib's `G_DEFINE_AUTO_CLEANUP_FREE_FUNC()`.
Closes: #1042
Approved by: jlebon
It looks like `curl_multi_socket_action()` will return an error
if *one* of the requests has an error, but we already check
for that explicitly by iterating over each handle.
In libcurl, the "easy" layer doesn't really make use of this
return value. I did a bit of looking elsewhere; systemd
does check it as a runtime error, not an assertion. librepo
doesn't use the multi interface.
Closes: https://github.com/ostreedev/ostree/issues/1035Closes: #1038
Approved by: jlebon
Coverity complained that the `else if (bytes_read == 0)` was dead
code if we happened to find it was already false when testing
`else if (G_UNLIKELY (bytes_read == 0 ...`.
There was nothing wrong with the logic, but let's rework it to
only test the value once; I think it does end up nicer anyways.
Coverity CID: 1452186
Closes: #1037
Approved by: jlebon
The fingerprint associated with each signature can be different to
the primary key ID (the normal one that people use to identify a
GPG key) if the signature is from a signing subkey. Try to find the
primary key and print this ID in preference to the subkey signature.
https://github.com/ostreedev/ostree/issues/608Closes: #1036
Approved by: cgwalters
Use gpgme_get_key to find the primary key for the key we are
looking for, and the primary key for each signature, and
compare these when looking up signatures.
The primary key is the first in the list of subkeys, which is
the normal key ID people use when referring to a GPG key as an
identity.
If the key has a signing subkey, signature->fpr will not match
the provided key_id, so looking up both keys and comparing the
primary key fingerprints ensures they are both canonicalised.
https://github.com/ostreedev/ostree/issues/608Closes: #1036
Approved by: cgwalters
This is a continuation of addition of journaling to libostree; see
e.g. <https://github.com/ostreedev/ostree/pull/708>.
I wanted more information at the end of fetches; in particular
some details about the delta execution (what opcodes etc.), but
this is a first step: we log things like the transferred data
as well as whether or not GPG was enabled, etc.
One awkward thing about this is how we map the fetcher options like
`tls-ca-path` back out into an enum for the code to log. But eh, hard to fix
without a bigger refactoring.
Closes: #1032
Approved by: jlebon
These were previously private, but since we expect people to use them, let's add
`#define`s like we did for some of the other commit metadata.
Closes: #1028
Approved by: jlebon
Mostly for the latest `-Wmaybe-uninitialized` fix, but while here also port some
places to newer APIs.
Update submodule: libglnx
Closes: #1027
Approved by: jlebon
Regression from previous tmpfile refactoring; unfortunately
the `OSTREE_REPO_COMMIT_MODIFIER_FLAGS_GENERATE_SIZES` option
only has coverage via gjs currently.
Might expose it via the cmdline in a later option, but in the big picture the
idea was that this data is better kept in static deltas.
Closes: https://github.com/ostreedev/ostree/issues/1014Closes: #1016
Approved by: jlebon
See: https://github.com/projectatomic/rpm-ostree/issues/885
If we get a successful Apache directory listing HTML when fetching what we
intend to be a ref, we'd dump the HTML into the error.
I did some scanning of the pull code, and this was the only case
I saw offhand where we were dumping text out into an error. Which
makes sense, since most of our formats are binary, the exeptions I
think are just `repo/config` and `repo/refs/`.
Closes: #1015
Approved by: mbarnes
Using the error prefixing in the delta processing allows us to
do new code style. Also strip trailing whitespace.
Use error prefixing in a few other random places. I didn't
hunt for all of them, just testing out the new API.
Use `glnx_fchmod()`. Also note I dropped one `fchmod (tmpf, 0600)`
which is no longer necessary.
Update submodule: libglnx
Closes: #1011
Approved by: jlebon
Colin Walters
Jonathan Lebon
Philip Withnall
Robert McQueen
Ruixin