Clarify the documentation for functions like
ostree_repo_get_remote_boolean_option(), stating what out_value will be
set to on error.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #676
Approved by: cgwalters
The libcurl backend does all the work in the main thread/loop, which
seems to starve the idle scanning worker more. With the libcurl
backend, we're a lot more likely to have at least one outstanding
metadata request.
But it can more easily transiently happen with libcurl that all of our current
fetches are content. To be accurate here, just show Estimating if we're scanning
too.
Closes: #654
Approved by: jlebon
The gzip default is 6. When I was writing this code, I chose 9 under
the assumption that for long-term archival, the extra compression was
worth it.
Turns out level 9 is really, really not worth it. Here's run at level 9
compressing the current Fedora Atomic Host into archive:
```
ostree --repo=repo pull-local repo-build fedora-atomic/25/x86_64/docker-host
real 2m38.115s
user 2m31.210s
sys 0m3.114s
617M repo
```
And here's the new default level of 6:
```
ostree --repo=repo pull-local repo-build fedora-atomic/25/x86_64/docker-host
real 0m53.712s
user 0m43.727s
sys 0m3.601s
619M repo
619M total
```
As you can see, we run almost *three times* faster, and we take up *less
than one percent* more space.
Conclusion: Using level 9 is dumb. And here's a run at compression level 1:
```
ostree --repo=repo pull-local repo-build fedora-atomic/25/x86_64/docker-host
real 0m24.073s
user 0m17.574s
sys 0m2.636s
643M repo
643M total
```
I would argue actually many people would prefer even this for "devel" repos.
For production repos, you want static deltas anyways. (However, perhaps
we should support a model where generating a delta involves re-compressing
fallback objects with a bit stronger compression level).
Anyways, let's make everyone's life better and switch the default to 6.
Closes: #671
Approved by: jlebon
For a long time we've cached the remote configs in the repo, which
mostly makes sense for the `repo/config` file, but less sense
for `/etc/ostree/remotes.d`, because we want to support admins
interactively editing them.
One can delete the repo instance and create a new one, but that's a bit ugly.
Let's introduce an API for this so rpm-ostree can reload remotes after
admins/scripts edit them in `/etc`. We also might as well reload
any other entries in the config.
Structurually now, `ostree_repo_open()` deals with file descriptors, and then
calls `ostree_repo_reload_config()`. Except for the uncompressed cache, which is
the only thing that deals with FDs that can be configured. But we want to delete
that anyways.
No tests, since...we don't have a daemon in this codebase, don't want to shave
that yak just today.
Closes: #662
Approved by: jlebon
I was working on https://bugzilla.redhat.com/show_bug.cgi?id=1393545
and it was annoying that I couldn't know what the new (unsigned)
commit has was until verification succeeded. I could pull it
manually without GPG, but then it'd be sitting in the repo.
Now:
```
Updating from: fedora-atomic:fedora-atomic/25/x86_64/docker-host
Receiving metadata objects: 0/(estimating) -/s 0 bytes
error: Commit 2fb89decd2cb5c3bd73983f0a7b35c7437f23e3aaa91698fab952bb224e46af5: GPG verification enabled, but no signatures found (use gpg-verify=false in remote config to disable)
```
Closes: #663
Approved by: giuseppe
Without the element-type annotations, bindings don't know how to handle
the elements of the hash table. Since the table is created with destroy
functions, the caller does not own the elements, so transfer container
is used.
Closes: #635
Approved by: cgwalters
ostree_object_name_serialize returns a floating ref, so sink it before
adding it to the hash table so it can properly be freed later when the
hash table is destroyed.
This is particularly a problem for pygobject, which sinks the refs on
variants as it marshals them to native python types. If the ref isn't
already sunk, then the ref count won't increase and a critical warning
will be raised when both the hash table and pygobject try to unref it.
Closes: #635
Approved by: cgwalters
I was having this thought today about making more of the OS readonly,
and ultimately if we got to the point where all ostree operations are
through the repo and sysroot dfds, we could have rpm-ostree be the
only process holding those fds open, and have a read-only bind mount
on top.
Anyways, we're not there, likely won't be soon, but this gets us
closer to being fully fd relative.
Closes: #628
Approved by: jlebon
These are out parameters, so add the (out) annotation and switch
(nullable) to (optional) since the latter is used for the purpose of
optional out parameters.
Closes: #629
Approved by: cgwalters
glnx_make_lock_file requires that the dfd passed in survives the
lifetime of the lock. Since dfd_iter.fd gets cleaned up after the
function returns, this isn't the case. dfd_iter.fd should be equivalent
to tmpdir_dfd, since we iter on ".", and that survives past the
function, so just use that instead.
Closes: #591
Approved by: cgwalters
`-fsanitize=address` complained that the `refcount > 0` assertions
were reading without atomics. We can fix this by reworking them
to read the previous value.
Closes: #582
Approved by: jlebon
Conceptually we've been moving towards having our GPG verification
paths be per-remote. The code internally supports this, but we
didn't expose an API to use it conveniently.
This came up when trying to add a new `gpgkeypath` option, since
right now rpm-ostree manually finds keyrings for the remote, and
hence it wasn't looking at the keypath, and said "Unknown key"
in status.
Adding an API fixes this nicely.
Closes: #576
Approved by: giuseppe
For Project Atomic, we already have RPM signatures which use files in
`/etc/pki/rpm-gpg`. It's convenient to simply bind the OSTree remote
configuration to those file paths, rather than having duplicate key
data.
This does mean that we need to parse the files for verification, so we
end up importing them into the verifier's temporary keyring, which is
a bit ugly, but it's what other projects do.
Closes: https://github.com/ostreedev/ostree/issues/573Closes: #575
Approved by: giuseppe
I was doing a chain of mirroring like A -> B -> C
And repo B had A as a remote. When I added B as
a remote to C, the summary file of B had a ref
upstream:foo/bar/baz, which caused all pulls from
B to C to fail, since the summary file is only
expected to have refs, not refspecs.
Closes: https://github.com/ostreedev/ostree/issues/561Closes: #565
Approved by: jlebon
Found by valgrind memcheck. g_variant_new_from_bytes takes a ref to the
bytes, so we need to release the original ref.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #556
Approved by: cgwalters
g_variant_get_strv is (transfer container): the caller is expected to
free the array, but not the individual strings.
Leak found with valgrind memcheck.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #556
Approved by: cgwalters
0 was used as an "unset" flag for tmp_dir_fd, which is technically
incorrect. For cache_dir_fd, -1 was used as the sentinal but 0
was checked for, resulting in close(-1).
Closes: #507
Approved by: cgwalters
When doing a prune, we should not try to delete objects in parent
repos, since it'll fail. There is a bigger discussion about the
semantics of `parent=` to be had, but this will fix trying to use
`ostree prune --repo=/ostree/repo/extensions/rpmostree/pkgcache`.
Closes: https://github.com/ostreedev/ostree/issues/467Closes: #471
Approved by: jlebon
The documentation says this is ignored, implying that you should pass
NULL to it. However, the function immediately returns in this case even
though the argument isn't used anywhere.
Closes: #458
Approved by: cgwalters
I forgot to actually remove `config_file` in the previous
commit, the txn lock hasn't been used in a long time, and
for the uncompressed cache, everything uses the fd already.
Closes: #433
Approved by: giuseppe
In general we want to support "idempotentcy" or "state
synchronization" across interruption. If a repo is only partially
created due to a crash or whatever, it's hard for a user to know that.
Let's just make `ostree_repo_create()` idempotent. Since all we're
doing is a set of `mkdirat()` invocations, it's quite simple.
This also involved porting to fd-relative, which IMO makes the
code a lot clearer.
Closes: #422
Approved by: 14rcole
In flatpak i was using a parent repo, and it failed to update
with ENOENT when dispatching an set-read-source opcode, because the
object it referenced was in the parent repo.
This fixes that by making _ostree_repo_read_bare_fd look
at parent_repo.
Closes: #362
Approved by: cgwalters
Import `gs_file_enumerator_iterate()` for the next six months or
so...after RHEL 7.3 is released I'm strongly considering hard
requiring 2.46 or so.
Likely at some point we should figure out how to share more "glib
backport" code with NetworkManager at least.
Closes: #341
Approved by: jlebon
The previous code was subject to a divide by zero if less than a
second had passed. Rework it so we only do the divide if more than a
second has passed.
Closes: #349
Approved by: Mathnerd314
I find the "-z2" is really a long ago relic of the past when I changed
the format. We no longer have anything to do with the original
`archive`, so let's start allowing people to type `--mode=archive`
which just looks saner.
At some point later I'll update the docs too, but it'll be an annoying
transition period as we'll have to say "On older OSTree, use -z2" etc.
Closes: #346
Approved by: giuseppe
Just noticed this while reading some code, we didn't have many manual
`out: close()` bits left, this pushes us over the edge to autocleanup
almost everywhere.
Closes: #332
Approved by: jlebon
As the docs say, `g_regex_match()` still allocates a match even if it
returns `FALSE`. Using `g_autoptr` is just plain better.
Closes: #292
Approved by: krnowak
This changes around a few things that didn't work for me:
* Section names seem to be ostree-* instead of libostree-*
* Also XML files are ostree-* (they didn't show up at all)
- gtk-doc doesn't seem to parse const _OSTREE_PUBLIC correctly
* pull documentation is now on the actual functions rather than stubs
* Update gitignore with some more files
And there some changes to make gtk-doc give fewer warnings (not finished)
Closes: #327
Approved by: cgwalters
This centralizes the ifdef's in one file, which will make it
easier to write new pull backends.
ostree-repo-pull.c is now built unconditionally
Closes: #327
Approved by: cgwalters
1 is a better choice than 0 because some programs use 0
as a special value; for example, GNU Tar warns of an
"implausibly old timestamp" with 0.
Closes: #330
Approved by: cgwalters
This kills another GSystem consumer...I think down the line I'd like
to do something like "detect whether file is > 1k if so, mmap,
otherwise just readall()" so we can use this helper in more places.
Closes: #319
Approved by: jlebon
We have a lot of "allow_noent" type wrapper functions since
a common pattern is to allow files to not exist, but still
throw cleanly on other issues.
This is another instance of that, and cleans up duplicated error
handling code.
Part of this is prep for moving away from `GFile` consumers.
Closes: #319
Approved by: jlebon
On 32-bit systems the modifier for printing 64bit values should be
%llu instead of %lu. Just use appriopriate macros that do the right
thing.
Closes: #329
Approved by: giuseppe
The "no atime" thing was mostly useful only before "relative atime"
updates landed. Users who care about performance will turn it off
entirely anyways.
Closes: #316
Approved by: jlebon
In addition to generic fd relative porting,
this is a necessary preparatory step for libglnx porting, because
when I tried to use `g_mapped_file_new` I hit an issue with
it using a different error domain from GIO.
Thankfully libglnx consistently uses the GIO error domain, and here
we're now using it for the `open()` call.
Closes: #317
Approved by: jlebon
Bug 765429 said that not having a time estimate can be annoying
when working with large pulls.
There isn't any complex time estimation logic here - we just take
the number of bytes remaining and do a linear projection of
the bytes per second rate at the current point in time.
Closes: #318
Approved by: cgwalters
This can be useful for validating the 3rd party data that is put in
the extensions directory and is signed with the same keys as commits
or the summary file.
Closes: #310
Approved by: cgwalters
Moved out setting up a GPG verifier to a separate function, as I would
like to use it for the any data verification function in the following
commit.
Closes: #310
Approved by: cgwalters
I plan to add a function for verifying any data which may return the
error about lack of trusted signatures, so let's avoid the redundancy
and put the check in the separate function.
Closes: #310
Approved by: cgwalters
Apparently I got the bracketing wrong in
862e6ecdcc58f025696b1394adfc0fcf7322df23:
src/libostree/ostree-repo.c: In function 'ostree_repo_delete_object':
src/libostree/ostree-repo.c:3538:11: warning: missing braces around
initializer [-Wmissing-braces]
g_auto(GVariantBuilder) builder = {0,};
Closes: #298
Approved by: cgwalters
This tries to avoid leaking GVariantBuilders and GVariants in some
situations. The leaks were usually happening when some error occurred
or because of unclear variant ownership situation.
The former is mostly about making sure that g_variant_builder_clear is
called on builders that didn't finish their variant building process.
The latter is surely more work - sometimes the result of
g_variant_builder_end() should not be passed directly to a function,
but rather stored in a g_autoptr(GVariant), sunk and then passed to a
function. IMO, with an advent of g_autoptr, GVariants should be always
sunk instead of relying on some receiver function sinking it. This
would make an easy-to-follow policy of always sinking your
variants. Functions could then assume that the passed variant is
already sunk. These leaks are still happenning in commands, but they
are less harmful, since that code will not be used by some daemon as a
library routine.
Closes: #291
Approved by: cgwalters
This adds a _with_options variant of the
ostree_repo_remote_fetch_summary function, so we can tell the fetcher
to use a specific URL instead taking it from the remote config.
Closes: #290
Approved by: cgwalters
The base URI created in this line was always (sans erroneous
situations) overwritten in the code block below without freeing it
previously, so it leaked.
Closes: #290
Approved by: cgwalters
It's very useful for third-party applications to have someplace to store
their data guaranteed to be on the same device as the repo (thus
ensuring hardlinks) while still being shielded away from any of OSTree's
timely garbage collections.
We create a new "extensions/" subdirectory where apps can include
whatever they wish in "extensions/myapp/". This subdirectory is
completely unmanaged by ostree.
NB: I didn't bother making it a member of the OstreeRepo proper since we
don't really use it for anything else yet.
Closes: #286
Approved by: cgwalters
I ended up deciding to move this one into libglnx, seems like
something other libglnx-using software might want to do, even though
xdg-app doesn't right now.
Closes: #282
Approved by: jlebon
We were arbitrarily only deleting content after exactly one day. Some
use cases may want something else; make it configurable.
Closes: #170
Approved by: jlebon
We had a policy of cleaning up all files in `$repo/tmp` older
than one day, but we should really clean up previous bootid staging
directories too, as they can potentially take up a lot of disk space.
https://bugzilla.gnome.org/show_bug.cgi?id=760531Closes: #170
Approved by: jlebon
Setting this causes commit to error out. There are other ways we
could do this in a more sophisticated fashion, such as via SystemTap
etc. But this has low-tech applicablity, works as non-root.
The reason I'm adding this is so that we can add test cases for
cleanup of the `tmp/staging-` directory.
Closes: #170
Approved by: jlebon
I have a cache drive I often mount read-only, and the previous commit
for opening `tmp/cache` broke since `errno == EROFS`, not `EPERM`.
It turns out we already had the concept of a "writable" repo, so just
piggy back off that.
Closes: #281
Approved by: giuseppe
To GLnxConsoleRef. There were some subtleties here, for example we
used to reference `GSConsole` inside the progress changed function,
which at first seems like an ABI hazard, because e.g. rpm-ostree or
xdg-app could still be passing a `GSConsole` instance there. Luckily,
it turns out to be compatible to just start calling libglnx here.
Another issue was that due to libglnx's use of the cleanup function,
we needed to ensure we always called `ostree_async_progress_finish()`
*before* the cleanup function was invoked.
Closes: #280
Approved by: giuseppe
In the case we have a repo with a parent, and the child repo has a
remote called "foo", but some option is unset. Then when we look up
the parent repo for a value before using the default we will fail due
to the parent not having the "foo" remote. As soon as we find the
requested remote at some point in the hierarchy we need to ignore further
errors and use the default value.
Closes: #274
Approved by: giuseppe
We looked for and locked old temporary directories so we can
reuse them if not in use. However, once we found one that
we can reuse we didn't stop iterating, and eventually we
reached the end. This means we can lock multiple dirs.
Closes: #273
Approved by: giuseppe
There was some leftover intermediate cruft here I noticed
while reviewing another patch:
- We had an output `GFile*` for that was never used
- We required the caller to allocate the loose pathbuf, but
none of them ever reused it
- We had an extra intermediate function
Also while looking at this, I'm now uncertain whether some of the
callers of `_ostree_repo_has_loose_object` should really be invoking
`ostree_repo_has_object()`, but let's leave that aside for now.
Closes: #272
Approved by: alexlarsson
This allows you to replace the default
$sysroot/$sysconfdir/ostree/repos.d string value, and to use a similar
feature for repos that are not the system repo.
In particular, this allows us to support /etc/xdg-app/remotes.d for
xdg-app.
Closes: #247
Approved by: cgwalters
Otherwise we get undefined behaviour if the client didn't explicitly set
any flags.
Also, add documentation for all the other options supported by
ostree_repo_pull_with_options().
Closes: #252
Approved by: cgwalters
These are useful for ostree users (like xdg-app) that have custom
options for remotes. In particular they are useful when we later make them
all respect self->parent_repo.
Closes: #236
Approved by: cgwalters
⚠️ There is a notable spiked pit trap here around
`posix_fallocate()` and `errno`. This has bit other projects,
see e.g.
7bb87460e6
Otherwise the port was straightforward.
It used to be allowed to run something like "ostree remote refs" on
a read-only (e.g. system) repo. However, the summary cache caused that to
break. This commit just makes it not save the cache if we get some kind
of permission error when writing it. It'll still work, even without the
cache.
https://bugzilla.gnome.org/show_bug.cgi?id=763855
It allows an optimization to skip the download of the summary file
if its .sig file is unchanged.
Downloading the .sig file is much cheaper than downloading the summary
file from repositories with many branches.
https://bugzilla.gnome.org/show_bug.cgi?id=762973
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I plan to use this in rpm-ostree at least for two reasons:
- To find the mtime on the repo
- To use the tmp/ directory to stage content (but we should eventually
add a better API)
I don't know why we didn't do this a long time ago. This extends the
pull API to allow grabbing a specific commit, and will set the branch
to it. There's some support for this in the deploy engine, but there
are a lot of reasons to support it for raw pulls (such as subset
mirroring cases).
In fact I'm thinking we should also have the override-version logic
here too.
NOTE: One thing I debated here is inventing a new syntax on the
command line. Git doesn't seem to have this functionality (probably
because it'd be rarely used). The '@' character at least doesn't
conflict with anything.
Anyways, I wanted this for some other test cases. Without this,
writing tests that go between different commits is more awkward as one
must generate the content in one repo, then pull downstream, then
generate more content, then pull again. But now I can just keep track
of commit IDs and do exactly what I want without synchronizing the
tests.
I'd like to incrementally convert all of `ostree-repo*.c` to
fd-relative usage, so that we can sanely introduce
`ostree_repo_new_at()` which doesn't involve GFile.
This one is medium risk, but passes the test suite.
Originally, a lot of the `fsync()` calls here were added for the
wrong reason - I was chasing a bug that ended up being the extlinux
bootloader not parsing 64 bit ext4 filesystems. But since it looked
like corruption, I tried adding a lot more `fsync()` calls.
All we should have to do is use `syncfs()`. If that doesn't work,
it's a kernel bug.
I'm making this change because skipping the individual fsyncs can be a
major performance win - it's easier for the FS to optimize, we do more
in parallel, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=757117
The tmp directory is lazily created for each fetcher instance, since
it may require superuser permissions and some instances only need
_ostree_fetcher_request_uri_to_membuf() which keeps everything in
memory buffers.
This way two pulls will not use the same tmpdir and accidentally
overwrite each other. However, consecutive OstreeFetchers will reuse
the tmpdirs, so that we can properly resume downloading large objects.
https://bugzilla.gnome.org/show_bug.cgi?id=757611
Concurrent pulls break since we're sharing the staging directory for
all transactions in the repo. This makes us use a per-transaction directory.
However, in order for resumes to work we first look for existing
staging directories and try to aquire an exclusive lock for them. If
we can't find any staging directory or they are all already locked,
then we create a new one.
https://bugzilla.gnome.org/show_bug.cgi?id=757611
This creates a subdirectory of the tmp dir with a selected prefix,
and takes a lockfile to ensure that nobody else is using the same directory.
However, if a directory with the same prefix already exists and is
not locked that is used instead.
The later is useful if you want to support some kind of resumed operation
on the tmpdir.
touch reused dirs
https://bugzilla.gnome.org/show_bug.cgi?id=757611
When a commit is deleted and the repo is configured to use tombstone
commits, create one. Delete the tombstone file only if the commit is
pulled again.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Had a rare situation where I had no libsoup development files, so I
took the opportunity to fix the build errors. Ugly, but works now.
Would be nice if libsoup could be a hard dependency since we rarely
ever test a configuration without it.
xdg-app was hanging for me with v2015.8, but worked with v2015.7.
I narrowed things down to the GMainLoop/context commit, in which
we started pushing a temporary main context for synchronous
requests internally.
That's never really going to work with libsoup - there needs
to be a single main context which works on the socket. Furthermore,
clients couldn't get progress messages that way.
For *other* internal uses where we added APIs that talk to the remote
repo, we cleanly push a temporary main context.
(Note that I kind of snuck in a change here around the GError handling
in pulls that isn't strictly related but came up in testing)
First of all, what we were doing with having GMainLoop in the internal
APIs is wrong. Synchronous APIs should always create their own main
context and not iterate the caller's. Doing the latter creates
potential for evil reentrancy issues. Sync API should block, async
API is for not blocking.
Now that's out of the way, fix the pull code to do the clean
```
while (termination_condition (state))
g_main_context_iteration (mainctx, TRUE);
```
model for looping. This is a lot easier to understand and ultimately
more reliable than having other code call `g_main_loop_quit()`, as the
loop condition is in exactly one place.
We can also remove the idle source which only fired once.
Note we have to add a hack here to discard the synchronous session and
create a new one which we only use async.
https://bugzilla.gnome.org/show_bug.cgi?id=753336
It allows to specify whether GPG verification for the summary file is
enabled for a specific repository.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The global keyring directory (trusted.gpg.d) is deprecated. Only use it
when a specified remote does NOT have its own keyring, or when verifying
local repository objects.
Note, because mixing in the global keyring directory is now an explicit
choice, OstreeGpgVerifier no longer needs to implement GInitableIface.
If a remote keyring does not already exist, create an empty pubring.gpg
file in the temporary directory prior to importing keys. This prevents
gpg2 from creating a pubring.kbx file in the new keybox format [1]. We
want to stay with the older keyring format since its performances issues
are not relevant here.
[1] https://gnupg.org/faq/whats-new-in-2.1.html#keybox
External daemons like rpm-ostree want push notification any time a
change is made by an external entity. inotify provides notification,
but a problem is there's no easy way to monitor all of the refs.
In the past, there has been discussion of opt-in recursive timestamps:
https://lkml.org/lkml/2013/4/5/307
But in today's world, let's just bump the mtime on the repo itself, as
a central inotify point.
Closes: https://github.com/GNOME/ostree/pull/111
Imports one or more GPG keys from a source stream or from the user's
personal keyring into a remote-specific keyring. The keys to import
can optionally be restricted by a list of key IDs.
The imported keys are used to conduct GPG verification when pulling
from the given remote.
Philip Withnall
Colin Walters
Dan Nicholson
Jasper St. Pierre
Simon McVittie
Owen W. Taylor
Jonathan Lebon
Alexander Larsson
Mathnerd314
Krzesimir Nowak
Sam Spilsbury
Giuseppe Scrivano
Matthew Barnes
John Hiesey
Jeff Ortel