We were doing a check to verify that `ostree admin upgrade` wouldn't
accept a downgrade without `--allow-downgrade`. However, there's no
guarantee that the commit it's upgrading from is older than HEAD^ (what
we're upgrading to). Specifically, if the test runs fast enough, the
timestamps could be equal, since the lowest resolution is seconds.
Rework the test so that we first upgrade to HEAD, which we're sure is at
least 1 second apart from HEAD^, and *then* check that downgrade
protection is enforced.
We also can't use `rev-parse testos/buildmaster/x86_64-runtime` as a way
to know what commit the host is sitting on since the ref might've gone
ahead. Instead, just use `ostree admin status | head -n1`. (I played
with using the `ostree/I/J/K` refs, but those depend on what the
boot/subbootversion is and can easily change if we change previous
tests).
In a CI run I think one of these `ostree show` commands is failing.
While that output would be useful, the actual `err.txt` usually
has what we want too.
There's a lot of historical baggage associated with GPG verification
and `ostree pull` versus `ostree pull-local`. In particular nowadays,
if you use a `file://` remote things are transparently optimized
to e.g. use reflinks if available.
So for anyone who doesn't trust the "remote" repository, you should
really go through through the regular
`ostree remote add --sign-verify=X file://`
path for example.
Having a mechanism to say "turn on signapi verification" *without*
providing keys goes back into the "global state" debate I brought
up in https://github.com/ostreedev/ostree/issues/2080
It's just much cleaner architecturally if there is exactly one
path to find keys: from a remote config.
So here in contrast to the GPG code, for `pull-local` we explictily
disable signapi validation, and the `ostree_repo_pull()` API just
surfaces flags to disable it, not enable it.
For the same reason as https://github.com/coreos/rpm-ostree/pull/2094.
What we care most about is that the new commit we pull is newer than the
one we're currently sitting on, not necessarily that it's newer than the
branch itself, which it might not be if e.g. we're trying to deploy a
commit older than the tip but still newer than the deployment (via
`--override-commit`).
The way `timestamp-check` works might be too restrictive in some
situations. Essentially, we need to support the case where users want to
pull an older commit than the current tip, but while still guaranteeing
that it is newer than some even older commit.
This will be used in Fedora CoreOS. For more information see:
https://github.com/coreos/rpm-ostree/pull/2094https://github.com/coreos/fedora-coreos-tracker/issues/481
Per https://github.com/ostreedev/ostree/issues/2080#issuecomment-623614483
A huge benefit of ed25519 (and ECC in general) is that keys are very
short - short enough that it's completely reasonable to inline
them into a command line argument.
And I think that's a good model; it makes the keys very visible.
For example, someone could easily copy-paste a commandline
argument from a webpage (secured via TLS) that says to run
`ostree remote add --sign-verify=ed25519=inline:KEY`.
I think we should encourage removing the writable bits from
executables. This has happened to me:
https://thomask.sdf.org/blog/2019/11/09/take-care-editing-bash-scripts.html
And not having the writable bit may help prevent hardlink
corruption with OSTree in some cases.
We can't do this by default, but add a convenient CLI flag
for it.
All of the underlying libostree APIs have supported passing `NULL`
for a merge deployment for...a long time. But we never plumbed
it up into the CLI.
Add a `--no-merge` option to aid people who want to do a "factory reset":
https://github.com/ostreedev/ostree/issues/1793
Commit e474033e removed the redirection of incorrect public keys
aimed to generate a lot of files without correct public signature.
Fix the test by returning back the creation of files containing
incorrect public keys for ed25519.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
`libsodium` is an implementation detail. In particular, I'd like
to consider using OpenSSL for ed25519 (if libsodium isn't configured
and openssl is).
So switch the name of the exposed feature and adjust the tests.
Previously we would pass the `verification-key` and `verification-file`
to all backends, ignoring errors from loading keys until we
found one that worked.
Instead, change the options to be `verification-<engine>-key`
and `verification-<engine>-file`, and then
rework this to use standard error handling; barf explicitly if
we can't load the public keys for example. Preserve
the semantics of accepting the first valid signature. The
first signature error is captured, the others are currently
compressed into a `(and %d more)` prefix.
And now that I look at this more closely there's a lot of
duplication between the two code paths in pull.c for verifying;
will dedup this next.
I was trying to followup the `--selinux-policy-from-base` work
to add a `cosa build --fast=overlay` for coreos-assembler,
but hit on the fact that using e.g. `--owner-uid` disables
commit optimizations.
A while ago, https://github.com/ostreedev/ostree/pull/1643 landed
which optimized this for the case where no modifications are provided.
But, we really need the SELinux policy bits, and it's super convenient
to run `ostree commit` as non-root.
It's fairly surprising actually that it's taken us so long to
iterate on a good interface for this "commit changes on top of a base"
model. In practice, many nontrivial cases really end up needing
to do a (hardlink) checkout, and that case is optimized.
But for this coreos-assembler work I want to directly overlay onto
a commit object another commit object.
That previous PR above added exactly the API we need, so let's
expose it in the CLI.
What you can see happening in the test is that we provide
`--owner-uid 42`, but that only applies to directories/files
that were added in the commit.
And now that I look at this, I think what we really want here
is to avoid changing directories that exist in the base, but
eh; in practice the main use here is for `--owner-uid 0` while
committing as non-root; and that works fine with this since
the baseline uid will be zero as well.
This code wasn't written with idiomatic GError usage; it's not standard
to construct an error up front and continually append to its
message. The exit from a function is usually `return TRUE`,
with error conditions before that.
Updating it to match style reveals what I think is a bug;
we were silently ignoring failure to parse key files.
I am getting SELinux xattrs committed in local development (inside
https://github.com/cgwalters/coretoolbox ), which
throws off the hardcoded sizes in this test.
When we're only pulling a subset of the refs available in the remote, it
doesn't make sense to copy the remote's summary (which may not be valid
for the local repo). This makes the check here match the one done
several lines above when we decide whether to error out if there's no
remote summary available.
This extends the fix in https://github.com/ostreedev/ostree/pull/935 for
the case of collection-refs.
Also, add a unit test for this issue, based on the existing one in
pull-test.sh.
Pull should to fail if no known signature available in remote's
configuration or well-known places.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Additional test of signatures check behavior during the pull
with keys file containing wrong signatures and correct verification
key. Both are set as a part of remote's configuration.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Add test for signature verification of summary file during the pull.
Adopted version of GPG tests from `test-pull-summary-sigs.sh`.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Allow to run the pulling test if there is no ed25519 support.
Test the signed pull only with dummy engine. Fixed tests names.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
After splitting out the common key to secret/public inside the dummy engine we
need to pass the the public key for remote with dummy engine usage.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Option "--no-sign-verify" disable the signature verification including
GPG. So use it in tests instead of "--no-gpg-verification".
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Add functions for keys generation to be used in signing-related tests:
- gen_ed25519_keys initializing variables ED25519PUBLIC, ED25519SEED and
ED25519SECRET with appropriate base64-encoded keys
- gen_ed25519_random_public print a random base64 public key (used in
tests with wrong keys)
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Extend the ed25519 tests with checking the system-wide directory
keys loading code(with the help of redefinition).
Added test of ed25519 revoking keys mechanism.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
`ostree sign` is able to use several public keys provided via arguments
and via file with keys.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
API changes:
- added function `ostree_sign_add_pk()` for multiple public keys using.
- `ostree_sign_set_pk()` now substitutes all previously added keys.
- added function `ostree_sign_load_pk()` allowed to load keys from file.
- `ostree_sign_ed25519_load_pk()` able to load the raw keys list from file.
- use base64 encoded public and private ed25519 keys for CLI and keys file.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Add tests checking:
- sign mechanism is in working state
- module 'dummy' is able to sign/verify commit
- module 'ed25519' is able to sign/verify commit
- both modules could be used for the same commit
- 'ostree sign' builtin works with commits
- 'ostree commit' builtin able to sign commits
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
The [dev-overlay](332c6ab3b9/src/cmd-dev-overlay)
script shipped in coreos-assembler mostly exists to deal
with the nontrivial logic around SELinux policy. Let's make
the use case of "commit some binaries overlaying a base tree, using
the base's selinux policy" just require a magical
`--selinux-policy-from-base` argument to `ostree commit`.
A new C API was added to implement this in the case of `--tree=ref`;
when the base directory is already checked out, we can just reuse
the existing logic that `--selinux-policy` was using.
Requires: https://github.com/ostreedev/ostree/pull/2039
This test keeps occasionally failing in CI - as expected, because
we retry 8 times for an object but it's completely possible for
us to hit the <0.5% chance of 50% failure 8 times in a row.
Since the max errors from the server is 100, set retries to the
same thing.
Previously we made an effort to use the [Fedora Standard Test Interface](https://docs.fedoraproject.org/en-US/ci/standard-test-interface/).
This effort was not very successful; the primary thing that
it really died on is Ansible just didn't support rebooting
very well. I think that's since gotten better, but even
then, Ansible wasn't the best thing for a test framework
for us anyways.
In the meantime Fedora CoreOS happened emphasizing Ignition
and not "post-hoc reconciliation" models like Ansible over
ssh.
And, [coreos-assembler](https://github.com/coreos/coreos-assembler) happened too.
Furthermore, we really need to test OSTree's interaction
with Ignition as we've invented several special things there.
Then most recently, I've been working on having
cosa/kola support running externally defined tests:
https://github.com/coreos/coreos-assembler/pull/1215
There's a lot of things to clean up after this but at least this
works for me:
```
$ cd /srv/fcos
$ cosa kola run -- --parallel 4 --output-dir tmp/kola -E ~/src/github/ostreedev/ostree/ 'ext.ostree.*'
```
NOTE: This *does not* drop ostree binaries into the target. See:
https://github.com/coreos/coreos-assembler/pull/1252#issuecomment-600623315
This drops our dependency on Python in the installed tests, and
also fixes a few bugs that came up.
I disabled the `itest-bare-user-root.sh` one because it's
entangled with the shell script infrastructure for the unit tests.
Move the alternative builds into the Jenkinsfile.
Update it to do a FCOS build + kola run.
We drop the flatpak/rpm-ostree runs for now; the former
will needs some work to do the automatic virt bits. The
latter I think we can circle back to when we e.g. figure
out how to include rpm-ostree's tests in kola runs.
This checks whether gpg-import will properly update the keyring for a
key that already exists. In particular, we check that changing the key
expiration time or revoking it results in commit verification failure
after re-importing the keys.
Add explicit tests for
`ostree_gpg_verify_result_require_valid_signature` in addition to the
implicit tests via `ostree pull` and others. This allows checking the
error code raised.
Currently `ostree_gpg_verify_result_require_valid_signature` always
returns an error that the key used for the signature is missing from the
keyring. However, all that's been determined is that there are no valid
signatures. The error could also be from an expired signature, an
expired key, a revoked key or an invalid signature.
Provide values for these missing errors and return them from
`ostree_gpg_verify_result_require_valid_signature`. The description of
each result is appended to the error message, but since the result can
contain more than one signature but only a single error can be returned,
the status of the last signature is used for the error code. See the
comment for rationale.
Related: flatpak/flatpak#1450
Currently tests are always run against the full lgpl2.sig file with all
signatures, but it should also be possible to specify one or more of the
individual lgpgl2.sig<N> files.
Drop the current usage of passing the signature index in the test data
since it's always specific to the test function and instead provide an
optional array of signature files for the test fixture to sign with.
When the private keys were generated, gpg added an ultimate trust entry
since you normally want to trust your own keys. However, this throws off
the expired signature testing since gpgme considers it valid if the key
is fully or ultimately trusted.
The use of a trustdb for the test-gpg-verify-result is unlike any other
GPG verification in ostree. Under normal circumstances, a temporary GPG
homedir is created without any trust information, so all keys are
treated as having unknown trust.
Regenerate an empty trustdb.gpg in gpg-verify-data so that the tests
behave as ostree normally operates. After this the expired signature
testing correctly shows up as a non-valid signature. The trustdb was
regenerated by simply removing it and running any gpg operation with the
gpg-verify-data directory as the homedir.
The full block with all 5 signatures remains, but this allows passing
individual signatures through the GPG verification APIs. The split was
done with `gpgsplit`, and looking at the output of `gpg --list-packets`
of the split and unsplit files appears correct.
These can then be imported during a test to revoke a key without trying
to go through the gpg --generate-revocation dialog. Note that these need
to go in a subdirectory of the homedir since `gpgkeypath` will try to
import every regular file in the homedir.
gpg prints a warning about unsafe permissions if the homedir is group or
world readable. This is just noise in the test logs, so appease it by
making the homedir 700.
Use long GPG key IDs as it's safer and matches the format used by gpg
and gpgme. Add the associated fingerprints since these are needed by gpg
when manipulating keys.
The case-ignoring regex `^(C|en_US)` will match any locale that starts
with `c`. On my system this is `ca_AD.utf8`, which breaks the test
suite. Instead, use a single regex that includes the joining `.` rather
than 2 separate regexes. This also changes `head` to use the `-n`
option, which has been preferred for at least 10 years in the coreutils
version and is supported by busybox as well.
Append a byte encoding the OSTree object type for each object in the
metadata. This allows the commit metadata to be fetched and then for the
program to see which objects it already has for an accurate calculation
of which objects need to be downloaded.
This slightly breaks the `ostree.sizes` `ay` metadata entries. However,
it's unlikely anyone was asserting the length of the entries since the
array currently ends in 2 variable length integers. As far as I know,
the only users of the sizes metadata are the ostree test suite and
Endless' eos-updater[1]. The former is updated here and the latter
already expects this format.
1. https://github.com/endlessm/eos-updater/
Ensure all 3 of the checksum, compressed size and uncompressed size are
correct. For repeatable objects, skip xattrs and use canonical
permissions for the commit. For the sizes, read a varint rather than
assuming they will be a single byte. To work around bugs in gjs with
byte array unpacking, manually build the array byte by byte. Split out
some helper functions to use in subsequent tests.
When running with installed tests, ostree-prepare-root (probably)
exists in /usr/lib. Add heuristics to look for it based on the directory
we're running from.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
If running with systemd and libmount then /var mounting is deferred for
systemd. Skip the relevant tests in this case as it will always fail.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Since we're not interested in any file inside /proc, exclude it from the
file listing in our fake root thus avoiding failures when processes die
during our execution and find(1) can't then look inside those
directories.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Define an `OstreeKernelArgsEntry` structure, which holds
both the key and the value. The kargs order array stores
entries for each key/value pair, instead of just the keys.
The hash table is used to locate entries, by storing
entries in a pointer array for each key. The same public
interface is preserved, while maintaining ordering
information of each key/value pair when
appending/replacing/deleting kargs.
Fixes: #1859
Prep for fsverity, where I want to create a new group
`[fsverity]` in the keyfile that has default values. We should
treat the absence of a group the same as absence of a key
in these "with defaults" APIs.
When copying the tree, using musl and GNU coreutils, something gets confused
when setting the ownership of symlinks and the copy fails with:
cp: failed to preserve ownership for osdata-devel/bin: Not supported
Rework using tar to avoid the problem.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
When building with musl there's no locale command, also its default
locale is C.UTF-8, so just get C.UTF-8 if we can't find locale.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
When using musl, it appears that the default is line buffered output, so
when `head -1` reads from a pipe we have to handle the source end of the
pipe getting EPIPE.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
A number of tests expect explicit left/right single quotes in their
messages, which will never happen in the C locale. Change so we pick a
likely UTF-8 locale, or fail if we can't find one.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
To allow for FIPS mode, we need to also install the HMAC file from
`/usr/lib/modules` to `/boot` alongside the kernel image where the
`fips` dracut module will find it. For details, see:
https://github.com/coreos/fedora-coreos-tracker/issues/302
Note I didn't include the file in the boot checksum since it's itself a
checksum of the kernel, so we don't really gain much here other than
potentially causing an unnecessary bootcsum bump.
If we are built without libarchive support, this test fails:
error: This version of ostree is not compiled with libarchive support
...
ERROR: tests/test-export.sh - too few tests run (expected 5, got 0)
ERROR: tests/test-export.sh - exited with status 1
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Tiny release. Just want to get out the important bugfixes instead of
backporting patches (notably the gpg-agent stuff and
`ostree-finalize-staged.service` ordering).
Closes: #1927
Approved by: cgwalters
The ostree fsck test is aimed to check that it will still fail an fsck
if the repository has been repaired by fsck. It also checks that a
pull operation corrects the error and ostree fsck will exit with zero.
The test was modeled after the following script:
rm -rf ./f1
mkdir -p ./f1
./ostree --repo=./f1 init --mode=archive-z2
mkdir -p ./trial
echo test > ./trial/test
./ostree --repo=./f1 commit --tree=dir=./trial --skip-if-unchanged --branch=exp1 --subject="test Commit"
rm -rf ./f2
mkdir -p ./f2
./ostree --repo=./f2 init
./ostree --repo=./f2 pull-local ./f1
echo whoops > `find ./f2 |grep objects |grep \\.file `
./ostree fsck --repo=./f2 ; echo Exit: $?
./ostree fsck --delete --repo=./f2 ; echo Exit: $?
./ostree fsck --repo=./f2 ; echo Exit: $?
./ostree --repo=./f2 pull-local ./f1
./ostree fsck --repo=./f2 ; echo Exit: $?
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
fsck: Update test so that it will pass on fs without xattrs
The fsck test does not require xattrs to prove that it works. It is
simple enough to change it to use an archvie instead of a bare type
repository.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Closes: #1910
Approved by: cgwalters
Jonathan Lebon
OpenShift Merge Robot
Colin Walters
Denis Pynkin
Matthew Leeds
Simon McVittie
Dan Nicholson
John Hiesey
Alex Kiernan
Robert Fairley
Jason Wessel