Much like the (optional) initramfs at
`/usr/lib/ostree-boot/initramfs-<SHA256>` or
`/usr/lib/modules/$kver/initramfs` you can now optionally include a
flattened devicetree (.dtb) file alongside the kernel at
`/usr/lib/ostree-boot/devicetree-<SHA256>` or
`/usr/lib/modules/$kver/devicetree`.
This is useful for embedded ARM systems which need the devicetree file
loaded by the bootloader for the kernel to discover and initialise
hardware. See https://en.wikipedia.org/wiki/Device_tree for more
information.
This patch was mostly produced by copy-pasting code for initramfs handling
and renaming `s/initramfs/devicetree/g`. It's not beautiful, but it is
fairly straightforward.
It may be useful to extend device-tree support in a number ways in the
future. Device trees dependant on many details of the hardware they
support. This makes them unlike kernels, which may support many different
hardware variants as long as the instruction-set matches. This means that
a ostree tree created with a device-tree in this manner will only boot on
a single model of hardware. This is sufficient for my purposes, but may
not be for others'.
I've tested this on my NVidia Tegra TK1 device which has u-boot running
in syslinux-compatible mode.
Closes: #1411
Approved by: cgwalters
The bootloader spec says:
> `devicetree` refers to the binary device tree to use when executing the
> kernel. This also shall be a path relative to the `$BOOT` directory. This
> key is optional. Example:
> `6a9857a393724b7a981ebb5b8495b9ea/3.8.0-2.fc19.armv7hl/tegra20-paz00.dtb`
This is necessary for booting my NVidia Tegra TK1 device. It uses u-boot
with syslinux compatibility. In the syslinux files that come with the
device this is called `FDT`, but u-boot treats `FDT and `DEVICETREE` as
synonyms.
See also: [f43c401 in u-boot].
[f43c401 in u-boot]: http://git.denx.de/?p=u-boot.git;a=commit;h=f43c401b72bb0db43ab0b55c4a79e1f4889d3aa2Closes: #1411
Approved by: cgwalters
In particular I'd like to get the `--copyup` changes out for an rpm-ostree
release that will use them. But there are other good changes here, and let's
keep up a regular release train 🚄 in general.
Closes: #1413
Approved by: jlebon
Previously we were doing e.g. `ot_util_filename_validate()` specifically inline
in dirtree objects, but only *after* writing them into the staging directory (by
default). In (non-default) cases such as not using a transaction, such an object
could be written directly into the repo.
A notable gap here is that `pull-local --untrusted` was *not* doing
this verification, just checksums. We harden that (and also the
static delta writing path, really *everything* that calls
`ostree_repo_write_metadata()` to also do "structure" validation
which includes path traversal checks. Basically, let's try hard
to avoid having badly structured objects even in the repo.
One thing that sucks in this patch is that we need to allocate a "bounce buffer"
for metadata in the static delta path, because GVariant imposes alignment
requirements, which I screwed up and didn't fulfill when designing deltas. It
actually didn't matter before because we weren't parsing them, but now we are.
In theory we could check alignment but ...eh, not worth it, at least not until
we change the delta compiler to emit aligned metadata which actually may be
quite tricky. (Big picture I doubt this really matters much right now
but I'm not going to pull out a profiler yet for this)
The pull test was extended to check we didn't even write a dirtree
with path traversal into the staging directory.
There's a bit of code motion in extracting
`_ostree_validate_structureof_metadata()` from `fsck_metadata_object()`.
Then `_ostree_verify_metadata_object()` builds on that to do checksum
verification too.
Closes: #1412
Approved by: jlebon
While we do protect against path traversal during pull, let's also validate
during checkout; it's a cheap operation and provides good last-mile protection.
Closes: #1412
Approved by: jlebon
Previously when initramfs-* was not found in a deployment's
boot directory, it was assumed that rootfs is prepared for
ostree booting by a kernel patch.
With this patch, the behaviour changes to be - if initramfs-*
is not found, assume that system is using a static
ostree-prepare-root as init process. Booting without initramfs
is a common use case on embedded systems. This approach is
also more convenient, than having to patch the kernel.
Closes: #1401
Approved by: cgwalters
Allways include ostree-repo-pull-private.h to get rid of the following
build error when HAVE_LIBCURL_OR_LIBSOUP is not defined:
src/libostree/ostree-repo-pull.c:1493:1: error: no previous prototype
for '_ostree_repo_verify_bindings' [-Werror=missing-prototypes]
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1389
Approved by: cgwalters
Let's do a new release with the locking preview, the http2 disable options and
other misc bugfixes to close out the year.
Closes: #1386
Approved by: jlebon
It'd all be really nice if there was some sort of `O_TMPFILE` for symlinks, but
anyways the way we were doing a generic "make temp file than rename" actually
defeats some of the point of `O_TMPFILE`. It's now fully safe to do "copy to
self", so let's do that for regfiles.
Closes: #1378
Approved by: jlebon
For the [rpm-ostree jigdo ♲📦](https://github.com/projectatomic/rpm-ostree/issues/1081) work.
We're basically doing "pull" via a non-libostree mechanism, and this
should be fully supported. As I mentioned earlier we should try to
have `ostree-repo-pull.c` only use public APIs; this gets us closer
to that.
Closes: #1376
Approved by: jlebon
I want some time to play with this more with different callers and work through
test scenarios. Let's disable the locking by default for now, but make it easy
to enable.
Closes: #1375
Approved by: jlebon
Try and clarify what happens with the prefixes, and that they always
return refspecs.
I’m still not 100% sure this is right.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1347
Approved by: cgwalters
It will be used by the fsck utility in future. We could expose it
publicly in future too, if needed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1347
Approved by: cgwalters
In the non-`CONSUME` path for regfiles (which happens currently for
`bare-user`), we go to a lot of contortions to make an "object stream",
only to immediately parse it again.
Fixing this will also enable the `G_IS_FILE_DESCRIPTOR_BASED()` fast path in
commit, since the input stream will actually reference the file descriptor and
not be an `_OstreeChainInputStream`.
There's a slight concern here in that we're no longer checksumming *literally*
the object stream passed in for the stream case, but I mention in the comment,
the data should be the same, and if it's not somehow we're not adding risk,
since the checksum is still covering the data we actually care about.
Prep for further changes to break up the `write_content_object()` path into
separate paths for archive, as well as regfile vs symlink in non-archive.
Closes: #1371
Approved by: jlebon
A while ago I did `truncate -s 0 /path/to/repo/00/123.commit`, and expected a
checksum error, but I actually got a validation error due to us loading the
commit into a variant and trying to parse out the parent checksum, etc.
I first started by changing the `load_and_fsck_one_object()` function to
checksum before loading, but the problem is that we do a traverse of all objects
first. Fixing this is going to require an `OSTREE_REPO_COMMIT_TRAVER_FLAG_FSCK`
or something.
In the meantime at least though, let's add a public API to fsck a single object
which *does* checksum cleanly before parsing the object, and change the `fsck`
command to use it.
We then change the fsck binary to do this while iterating over the refs
and finding the commit object. This way we'll at least get a checksum
first for commit objects, even if not dirtree/dirmeta.
Closes: #1364
Approved by: jlebon
This commit fixes an infinite loop that happens if you try to list the
remotes of a repo that has a parent repo set. It also adds a unit test
to ensure the right behavior, which is that both the child remotes and
parent remotes are listed.
Closes: #1366
Approved by: cgwalters
One major thing we can do to speed up local commits is multithreading. In
preparation for that, split up the recursion function so that the subdirectory
case is separate from the content (regfile/symlink) case. Then for non-subdirs,
we can easily peel off worker threads and gather the final checksums and update
the mtree from the main thread.
The diff here looks large but it's pretty straightforward; amazingly this change
compiled the very first time I tried it!
Closes: #1365
Approved by: jlebon
This seems to work around
https://github.com/ostreedev/ostree/issues/1362
Though I'm not entirely sure why yet. But at least with this it'll be easier for
people to work around things locally.
Closes: #1368
Approved by: jlebon
Add exclusive repository locking to all the pruning entry points. This
ensures that objects and deltas will not be removed while another
process is writing to the repository.
Closes: #1343
Approved by: cgwalters
Define an auto cleanup handler for use with repo locking. This is based
on the existing auto transaction cleanup. A wrapper for
ostree_repo_lock_push() is added with it. The intended usage is like so:
g_autoptr(OstreeRepoAutoLock) lock = NULL;
lock = ostree_repo_auto_lock_push (repo, lock_type, cancellable, error);
if (!lock)
return FALSE;
The functions and type are marked to be skipped by introspection since I
can't see them being usable from bindings.
Closes: #1343
Approved by: cgwalters
Currently ostree has no method of guarding against concurrent pruning.
When there are multiple repo writers, it's possible to have a pull or
commit race against a prune and end up with missing objects.
This adds a file based repo locking mechanism. The intention is to take
a shared lock when writing objects and an exclusive lock when deleting
them. In order to make use of the locking throughout the library in a
fine grained fashion, the lock acts recursively with a stack of lock
states. If the lock becomes exclusive, it will stay in that state until
the stack is unwound past the initial exclusive push. The file locking
is similar to GLnxLockFile in that it uses open file descriptor locks
but falls back to flock when needed.
The lock also attempts to be thread safe by storing the lock state in
thread local storage with GPrivate. This means that each thread will
have an independent lock for each repository it opens. There are some
drawbacks to that, but it seemed impossible to manage the lock state
coherently in the face of multithreaded access.
The API is a push/pop interface in accordance with the recursive nature
of the locking. The push interface uses an enum that's translated to
LOCK_SH or LOCK_EX as needed. Both interfaces use an internal timeout
field to decide whether to manage the lock in a blocking or non-blocking
fashion. The intention is to allow ostree applications as well as
administrators to control this timeout. For now, the default is a 30
second timeout.
Note that the timeout is handled synchronously in thread since the lock
is maintained in thread local storage. I.e., the thread that acquires
the lock needs to be the same thread that runs the operation. There may
be a way to offer an asynchronous version, but it's not clear exactly
how that would work since it would likely involve a separate thread that
invokes a callback when the locking operation completes.
https://bugzilla.gnome.org/show_bug.cgi?id=759442Closes: #1343
Approved by: cgwalters
I was getting a bare `error: Creating temp file: No such file or directory` when
debugging `test-concurrency.py`; with this I get
`error: Writing content object: Creating temp file: No such file or directory`
which helps me pin it down.
Closes: #1343
Approved by: cgwalters
For rpm-ostree I'd like to do importing in parallel with threads; the code is
*almost* ready for that except today it calls
`ostree_repo_transaction_set_ref()`.
Looking at the code, there's really a "transaction" struct here,
not just stats. Let's lift that struct out, and move the refs
into it under the existing lock.
Clarify the documentation around multithreading for various functions.
Closes: #1358
Approved by: jlebon
Time to cut a new release, we've got the libcurl cleanup ordering patch which
several people have hit, along with safe early fixes for tmpdir cleanup. Let's
try to land the locking PR early next cycle.
Closes: #1359
Approved by: jlebon
I was seeing the `Writing OSTree commit...` phase of rpm-ostree
being very slow lately. This turns out to be more fallout from
https://github.com/ostreedev/ostree/pull/1170
AKA commit: 8fe4536
Loading the xattrs is slow on my system (F27AW, XFS+LVM, NVMe). I haven't fully
traced through why, but AIUI at least on XFS the xattrs are often stored outside
of the inode so it's a little bit like doing an `open()+read()`. Plus there's
the LSM overhead, etc.
The thing is that for rpm-ostree's package layering use case, we
basically always want to treat the on-disk state as canonical. (There's
a subtle case here if one does overrides for something that contains
policy but we'll fix that).
Anyways, so we're in a state now where we do the slow but correct thing by
default, which seems sane. But let's allow the app to opt-in to telling us
"really trust devino". The difference between a `stat()` + hash table lookup
versus the full xattr load on my test case of `rpm-ostree install
./tree-1.7.0-10.fc27.x86_64.rpm` is absolutely dramatic; consistently on the
order of 10s without this support, and <1s with (800ms).
Closes: #1357
Approved by: jlebon
This squashes the last race condition I was actively hitting while running
`test-concurrency.py` in a loop. The race is when process A finds a tmpdir to
reuse, and goes to lock it. Meanwhile process B deletes it and unlocks the lock.
Process A then succeeds at grabbing a lock, but the tmpdir is deleted.
Closes: #1352
Approved by: dbnicholson
Previously we'd delete the tmpdir in `rename_pending_loose_objects()`
but do the unlock inside `ostree_repo_commit_transaction()`. Move
them into the same place in the latter function for consistency.
Doesn't fix anything, just a cleanup while reading the code and
working on `test-concurrency.py`.
Closes: #1352
Approved by: dbnicholson
Prep for future work here; let's cleanly separate the path for cleaning up the
txn staging directories from the code that cleans up "other stuff". Currently
only the former case uses the `GLnxLockFile` etc.
Closes: #1352
Approved by: dbnicholson
This closes a race condition I was seeing with `test-concurrency.py`. If we
don't have `O_TMPFILE` (or for symlinks) we'll create temporary files;
previously these would be subject to the date-based pruning because we set the
timestamp to 0 for objects.
Having our temporary files also in the txn staging dir ensures that they're
covered by the locking we do for that directory, and it's also generally cleaner
since the lifecycle of all the temporary data for a txn is in one place.
Closes: #1352
Approved by: dbnicholson
This lowers into the commit core what the static delta code
was doing, and improves the API.
The bigger picture issue is that for writing large files, our current "pull" API
where the caller provides a `GInputStream` is very awkward in some scenarios.
For example, we have a whole "libarchive input stream" that is a ~200 line
GObject that boils down to wrapping `archive_read_data()`.
This came more to a head when I was working on rpm-ostree jigdo since I had to
copy that object.
One step we can take after this is to further split `write_content_object()`
into a "write symlink or archive object" versus "write bare content object"
(it already has a mess of conditionals) and teach the latter case to call
this.
The eventual goal here is to make this API public.
Closes: #1355
Approved by: jlebon
For situations where fsync is disabled, there's basically
no reason to do the whole "staging directory" dance. Just
write directly into the repo.
Today I use `fsync=false` for my build/cache repos.
I briefly considered not allocating a tmpdir at all
in this case, but we actually do want the txn tmpdir
for the non-`O_TMPFILE` case.
Part of https://github.com/ostreedev/ostree/issues/1184Closes: #1354
Approved by: giuseppe
When using dynamic remotes (LAN and USB), we cannot use their name with
the common remote related ops (ostree_repo_remote_...) because ostree
doesn't keep this type of remotes in its internal hash table.
Unfortunately this means that we cannot access the URL of those remotes
either (in order to e.g. set the right URL for those remotes in
Flatpak).
Since the URL is actually stored in a key file that belongs to the
OstreeRemote, then we can simply allow users access to it through a
getter.
So this patch adds a method that allows to return the URL directly from
the OstreeRemote without having to go through the OstreeRepo.
The test-repo-finder-config is also updated by this patch to check if
the URL is correct.
Closes: #1353
Approved by: cgwalters
They don't play nicely currently with HTTP2 where we may
have lots of requests queued.
https://github.com/ostreedev/ostree/issues/878#issuecomment-347228854
In practice anyways I think issues here are better solved on a higher level -
e.g. apps today can use an overall timeout on pulls and if they exceed the limit
set the cancellable.
Closes: #1349
Approved by: jlebon
If a newly allocated tmpdir can't be locked, set initialized to FALSE so
that glnx_tmpdir_cleanup doesn't delete it when new_tmpdir goes out of
scope.
Closes: #1346
Approved by: cgwalters
Another tmpdir user may have deleted an existing tmpdir between the time
the current user called readdir and tried to open it.
Closes: #1346
Approved by: cgwalters
By default, unless it’s const, an (out) GHashTable will be assumed to be
(transfer full). That means the binding needs to free all the items in
the hash table, plus the table itself.
However, all the GHashTables we use have free functions set already, so
freeing the hash table will free its items. This results in a
double-free.
Fix that by ensuring we annotate such (out) hash tables as (transfer
container). Also annotate some other hash tables as (transfer none)
where appropriate, for clarity.
This fixes OSTree.Repo.list_collection_refs() in the Python bindings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1341
Approved by: dbnicholson
This reverts commit 519b30b7e1. Now that
the experimental GIR is being built correctly and OstreeRemote is a real
boxed type, this can be exposed again.
Closes: #1337
Approved by: pwithnall
Now that g-ir-scanner is being told about ENABLE_EXPERIMENTAL_API, it
can include these types correctly. Drop the __GI_SCANNER__ guards in the
header files so that all the declarations are found.
After this, you can actually construct the types normally:
>>> OSTree.CollectionRef.new('com.example.Foo', 'bar')
<OSTree.CollectionRef object at 0x7f2bba4c7528 (OstreeCollectionRef at 0x55c033ff2f30)>
Closes: #1337
Approved by: pwithnall
Without this, you can't really use OstreeRemote as a GObject, which is a
requirement for bindings.
This was found when attempting to include OstreeRemote in the GIR, and
g-ir-scanner wasn't able to link it's temporary object due to an
"undefined reference to `ostree_remote_get_type'" error.
Closes: #1337
Approved by: pwithnall
Fedora switched to 'xz' compress kernel modules, and recently
[RHEL7 did too](https://bugzilla.redhat.com/show_bug.cgi?id=1367496).
This compression defeats bsdiff.
While we have a "rollsum-able" test, we don't have a "bsdiff-able" test as it'd
be very expensive (we'd have to bsdiff, then apply it and compare the result).
Let's do the tactical quick fix here and just not try to delta files ending in
`.xz.`. This avoids us using bsdiff pointlessly for over 4000 files, which is
quite a notable speed increase for generating deltas.
Closes: #1333
Approved by: jlebon
This allows more explicit handling of commit state in code using
libostree, rather than hard-coding a commit state of 0 for ‘normal’.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1335
Approved by: cgwalters
Reorder cleanup functions so that curl_multi_cleanup() runs before
self->sockets is destroyed. This avoids an assert and invalid memory
access in sock_cb where self->sockets is dereferenced during
curl_multi_cleanup().
Closes: https://github.com/ostreedev/ostree/issues/1331Closes: #1332
Approved by: cgwalters
A tricky thing here that caused this to go past a lot of our tests
is that the code was mostly OK if there was an available delta from
an older commit. But this case broke if we e.g. had a new OS
deployment and did a `--require-static-deltas` pull, i.e. the initial
state.
I cleaned up our "find static delta state" function to return an enumeration,
and extended it with an "already have the commit" state. A problem
I then hit is that we've historically fetched detached metadata for
non-delta pulls, even if the commit hasn't changed. I decided not to
do that for `--require-static-deltas` pulls for now; otherwise the
code gets notably more complex.
Closes: https://github.com/ostreedev/ostree/issues/1321Closes: #1323
Approved by: jlebon
The main thing here is that a ton of stuff has happened in gnulib since we
imported `parse-datetime.y`. I cherry-picked a little bit of it, but that
upstream doesn't seem to build with `-Wundef`, so I just deleted some hunks.
(Note I reindented the warnings consistently)
Update submodule: libglnx
Closes: #1320
Approved by: jlebon
Since ostree_remote_get_type is not made available to g-ir-scanner, it
treats OstreeRemote as a bare struct. That's not kosher for bindings and
it issues the following warning:
src/libostree/ostree-repo-pull.c:5560: Warning: OSTree:
ostree_repo_resolve_keyring_for_collection: return value: Invalid
non-constant return of bare structure or union; register as boxed type
or (skip)
For now, just skip this API for bindings.
Closes: #1322
Approved by: pwithnall
g-ir-scanner was spitting this warning:
src/libostree/ostree-core.c:281: Warning: OSTree:
ostree_validate_collection_id: unknown parameter 'rev' in
documentation comment, should be 'collection_id'
Closes: #1322
Approved by: pwithnall
It's the slowest part, let's show admins something. This "update every 10%" code
was copied from the fsck command; obviously a better approach would be "progress
every N seconds" but doing that somewhat accurately requires making things
async; not worth it here yet.
Closes: #1314
Approved by: jlebon
I didn't fully spelunk this, but from what `static-delta-generate-crosscheck.sh`
had, we appeared to be doing this before, and it's clearly useful for local
testing rather than needing to spin up a HTTP server.
Closes: #1313
Approved by: jlebon
First, the manual crosscheck script bitrotted; it got caught up
in the "use libtest repo creation wrapper" bit, and also it
seems like at some point `pull --require-static-deltas` changed
meaning when dealing with `file:///` repos. I have more work to
unwind that.
Next, I'm seeing a delta failure which looks like a static delta
miscompilation with rollsums; change the compiler to print out
the source object too, which helped me debug this.
And finally in the processing code, fix incorrect error prefixing, which was
misleading.
Closes: #1311
Approved by: ashcrow
Fixes: 93457071cb "lib/deltas: Use pread() instead of lseek()+read()"
Caught this when trying to test alex's patch locally. I am going to review our
static delta pulls and try to get something more comprehensive locally. But in
the meantime this patch is clearly right.
Closes: #1312
Approved by: jlebon
Directly when we allocate a new part we finish the old one,
writing the compressed data to a temporary file and generating
the delta header for it.
When all these are done we loop over them and collect the headers,
sizes and either copy the tempfile data into the inlined superblock
or link the tempfiles to disk with the proper names.
Closes: #1309
Approved by: cgwalters
This allows us to create the final delta desciptor directly on disk
rather than having it all in memory. This is nice because it can
become quite large if inlined parts are used.
Note however, that we currently generate all the delta parts in
memory before adding them to the delta, so we still keep all individual
parts in memory. Fixing that is the next step.
Closes: #1309
Approved by: cgwalters
This makes the code nicer too. Properly unit testing this though really wants
like a whole set of stuff around parent repos...but we do have coverage of the
non-parent path in the current pull tests.
Closes: https://github.com/ostreedev/ostree/issues/1306Closes: #1308
Approved by: alexlarsson
For example, tmpfs or a cgroup file system. This is basically an
optimisation of the list of file systems we check for repositories,
since we would never expect any of these file systems to be capable of
containing a repository.
Depends on the new API from
https://bugzilla.gnome.org/show_bug.cgi?id=788927.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1307
Approved by: cgwalters
These two code paths tried to propagate errors which had never been set.
Set new errors instead.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1303
Approved by: cgwalters
A GVariantIter* was being passed to a GVariant format string varargs,
rather than a GVariantIter**. This resulted in memory corruption.
So we can continue to reuse ref_map throughout the function, make it a
GVariantIter* rather than a stack-allocated GVariantIter.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1301
Approved by: cgwalters
This is more subtle fallout from:
https://github.com/ostreedev/ostree/pull/1170
AKA commit: 8fe4536257
Before, if we found a devino cache hit, we'd use it unconditionally.
Recall that `bare-user` repositories are very special in that they're the only
mode where the on disk state ("physical state") is not the "real" state. The
latter is stored in the `user.ostreemeta` xattr. (`bare-user` repos are also
highly special in that symlinks are regular files physically, but that's not
immediately relevant here).
Since we now have `bare-user-only` for the "pure unprivileged container" case,
`bare-user` should just be used for "OS builds" which have nonzero uids (and
possibly SELinux labels etc.)
In an experimental tool I'm writing "skopeo2ostree" which imports OCI images
into refs, then squashes them together into a single final commit, we lost the
the `81` group ID for `/usr/libexec/dbus-1/dbus-daemon-launch-helper`.
This happened because the commit code was loading the "physical" disk state,
where the uid/gid are zero because that's the uid I happened to be using. We
didn't just directly do the link speedup because I was using `--selinux-policy`
which caused the xattrs to change, which caused us to re-commit objects from the
physical state.
The unit test I added actually doesn't quite trigger this, but I left
it because "why not". Really testing this requires the installed test
which uses SELinux policy from `/`.
The behavior without this fix looks like:
```
-00755 0 0 12 { [(b'user.ostreemeta', [byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x51, 0x00, 0x00, 0x81, 0xed]), (b'security.selinux', b'system_u:object_r:lib_t:s0')] } /usr/lib/dbus-daemon-helper
```
which was obviously totally broken - we shouldn't be picking up the
`user.ostreemeta` xattr and actually committing it of course.
Closes: #1297
Approved by: jlebon
Add some missing annotations and clarify that it always returns an open
repository on success.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1300
Approved by: cgwalters
This is a freeform string useful to track/display when a commit is "derived"
from some other format. For example, in the rpm-ostree test we make a
`vmcheck` ref that conceptually overlays the default ref like
`fedora-atomic:fedora/26/x86_64/atomic-host`.
My current patch sets the source title to e.g.
"Dev overlay on fedora-atomic:fedora/26/x86_64/atomic-host".
Another case I'm working on now is importing OCI images to use
as host images. For that case, the source title is
With this patch we could then set the original OCI image name + tag
as the source name, like:
"oci:cgwalters/demo-custom-fedora-atomic-host:26".
Closes: #1296
Approved by: jlebon
I was trying to use this with pygobject for an OCI+ostree project, and pygobject
rejected simply assigning to the field (understandably, since it can't bind the
lifetime together).
Add a wrapper function, which is still unsafe, but hides that unsafety
where most people shouldn't find it. And if they do...well, sorry,
Rust wasn't invented when ostree was started.
Closes: #1295
Approved by: pwithnall
I'm playing around with some ostree ⇔ OCI/Docker bits, and ran
into this while importing an OCI image that built from the Fedora
base image where `/home` is a regular directory, and I added a layer
that did the ostree bits of moving it to `/var` and leaving a symlink.
OCI/Docker supports this. Now since "process whiteouts" is really the
"enable OCI/Docker" mode, let's only replace dirs if that's enabled.
This leaves the `UNION_FILES` targeted for its original use case
which is unioning components/packages. (Although that use case itself
is now a bit superceded by `UNION_IDENTICAL`, but eh).
Closes: #1294
Approved by: jlebon
This is another OstreeRepoFinder implementation; it returns results from
a given set of URIs. It’s designed to be used for implementing user
overrides to other repo-finders, or for implementing unit tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1281
Approved by: mwleeds
Use g_variant_iter_loop() rather than next(), since it automatically
handles freeing the child memory each iteration. Previously, we leaked
it for all but the last iteration.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1293
Approved by: cgwalters
Change the regexp for validating refs to require at least one letter or digit
before allowing the other special chars in the set `[.-_]`. Names that start
with `.` are traditionally Unix hidden files; let's ignore them under the
assumption they're metadata for some other tool, and we don't want to
potentially conflict with the special `.` and `..` Unix directory entries.
Further, names starting with `-` are problematic for Unix cmdline option
processing; there's no good reason to support that. Finally, disallow `_` just
on general principle - it's simpler to say that ref identifiers must start with
a letter or digit.
We also ignore any existing files (that might be previously created refs) that
start with `.` in the `refs/` directory - there's a Red Hat tool for content
management that injects `.rsync` files, which is why this patch was first
written.
V1: Update to ban all refs starting with a non-letter/digit, and
also add another call to `ostree_validate_rev` in the pull
code.
Closes: https://github.com/ostreedev/ostree/issues/1285Closes: #1286
Approved by: jlebon
The way `_ostree_repo_open_content_bare()` did both looking for the object and
possibly creating a new fd was just weird and inconsistent with e.g. the pull
code where we always call `has_object()` first.
Just call `has_object()` in the delta paths that used this too, making the
implementation right now a thin wrapper around
`glnx_open_tmpfile_linkable_at()`, but this is prep for a later patch which does
more.
Closes: #1283
Approved by: jlebon
This is another case where making an input stream out of a memory buffer is a
bit silly; just hash the `GBytes` directly.
Closes: #1287
Approved by: jlebon
A side effect of commit 8fe4536257 is that
we started listing all xattrs even for files with device/inode matches;
further, we did that using the dfd/name which means we went through
the `/proc` path, which is slower and uglier.
Noticed this in strace while looking at adoption code.
Closes: #1280
Approved by: jlebon
That's why the syscall was invented, so let's use it. Just noticed while reading
the code while working on another patch.
Closes: #1270
Approved by: jlebon
This isn't perfect, but at least we fix an error-overwrite error, and in
practice `ostree admin unlock` isn't wrapped by `rpm-ostree` yet, so spew to
stderr is OK.
Closes: https://github.com/ostreedev/ostree/issues/1273Closes: #1279
Approved by: guyshapiro
For checkouts that are on the same device, for regular files we can simply
"adopt" existing files. This is useful in the "build from subtrees" pattern that
happens with e.g. `rpm-ostree install` as well as flatpak and gnome-continuous.
New files are things like an updated `ldconfig` cache, etc. And particularly for
`rpm-ostree` we always regenerate the rpmdb, which for e.g. this workstation is
`61MB`.
We probably should have done this from the start, and instead had a `--copy`
flag to commit, but obviously we have to be backwards compatible.
There's more to do here - the biggest gap is probably for `bare-user` repos,
which are often used with things like `rpm-ostree compose tree` for host
systems. But we can do that later.
Closes: #1272
Approved by: jlebon
I was working on a patch to do build on the work done to
import content objects async to do the same for metadata, but right
now we basically rely on writing them first to do the GPG verification
when scanning.
Things will be cleaner for that if we can pass the commit object directly into
`scan_commit_object()` and consistently use `gpg_verify_unwritten_commit()`.
We're careful here to continue to do it both ways (but at most one time), to
account for the case where a bad commit has been pulled and written - we need to
keep failing GPG verification there.
Closes: #1269
Approved by: jlebon
Prep for a later patch to do GPG verification before writing commit objects;
`_ostree_repo_gpg_verify_with_metadata()` already handles this, and so dropping
this gives us consistent error messages.
Closes: #1269
Approved by: jlebon
There's a subtle issue going on with the way we use `UNION_IDENTICAL`
now in rpm-ostree. Basically, the crux of the issue is that we checkout
the whole tree from the system repo, but then overlay packages by
checking out from the pkgcache repo. This is an easy way to break the
assumption that we will be merging hardlinks from the same repo.
This ends up causing issues like:
https://github.com/projectatomic/rpm-ostree/issues/1047
There, `vim-minimal` is already part of the host and has an object for
`/usr/share/man/man1/ex.1.gz`. `vim-common` has that same file, but
because it's unpacked in the pkgcache repo first, the hardlinks are not
the same.
There are a few ways we *could* work around this in rpm-ostree itself,
e.g. by re-establishing hardlinks when we do the content pull into the
system repo, but it still felt somewhat hacky. Let's just do this the
proper way and fall back to checksumming the target file if needed,
which is what librpm does as well in this case. Note that we only
checksum if they're not hard links, but they're the same size.
Closes: #1258
Approved by: cgwalters
Let's react to `Ctrl-C` faster here. Noticed while I was doing an update on my
desktop and playing with cancellation.
Closes: #1266
Approved by: jlebon
This is like `ostree_checksum_file` but fd-relative. This will be used
by https://github.com/ostreedev/ostree/pull/1258.
AFAICT, we actually didn't have any tests that check the `checksum` CLI.
Add a basic one here to test the old code as well as the new code.
Closes: #1263
Approved by: cgwalters
This works around an (IMO) SpiderMonkey bug - it tries to
clean up in a shared library destructor, but doesn't install a
`pthread_atfork()` handler to unset its state.
Closes: https://github.com/ostreedev/ostree/issues/1262Closes: #1264
Approved by: dbnicholson
This ends up a lot better IMO. This commit is *mostly* just
`s/glnx_close_fd/glnx_autofd`, but there's also a number of hunks like:
```
- if (self->sysroot_fd != -1)
- {
- (void) close (self->sysroot_fd);
- self->sysroot_fd = -1;
- }
+ glnx_close_fd (&self->sysroot_fd);
```
Update submodule: libglnx
Closes: #1259
Approved by: jlebon
It's no longer called directly by the pull code, so make it static.
The goal here is to have the pull and local-fs commit paths use higher level
more efficient APIs, and eventually make those APIs public.
Closes: #1257
Approved by: jlebon
This simplifies a lot of code; the header function was structured
to write to an input stream, but many callers only wanted the checksum,
so it's simpler (and error-free) to simply allocate a whole buffer
and checksum that.
For the callers that want to write it, it's also still simpler to allocate the
buffer and write the whole thing rather than having this function do the
writing.
A lot of the complexity here again is a legacy of the packfile code, which is
dead.
This is prep for faster regfile commits where we can avoid `G{In,Out}putStream`.
Closes: #1257
Approved by: jlebon
Nothing was using the `bytes_written` data (we always discard partially written
tmpfiles), so simplify everything by dropping it. Further, we always passed an
offset of `0`, so drop that argument too. (I believe that this was previously
used by the "pack files" code that we deleted long ago)
Second, we had an unnecessary internal wrapper for this function; drop that too.
Closes: #1257
Approved by: jlebon
If the filesystem is already frozen, FIFREEZE returns EBUSY, and if the
filesystem is already thawed, FITHAW returns EINVAL. It's very unlikely
these issues would arise on a real ostree system since the sysroot would
be locked during the freeze/thaw cycle.
However, when multiple fake sysroots are used during the test suite (run
as root), the tests could race to run the freeze/thaw cycle without
locking. Furthermore, there's no reason why an independent process might
be trying to freeze the filesystem while ostree was deploying. Ignore
but warn for these errors since there's not much ostree can do about it,
anyways.
Closes: #1260
Approved by: cgwalters
The faster (OpenSSL/GnuTLS) code lived in a `GInputStream` wrapper, and that
adds a lot of weight (GObject + vtable calls). Move it into a simple
autoptr-struct wrapper, and use it in the metadata path, so we're
now using the faster checksums there too.
This also drops a malloc there as the new API does hexdigest in place to a
buffer.
Prep for more work in the commit path to avoid `GInputStream` for local file
commits, and ["adopting" files](https://github.com/ostreedev/ostree/pull/1255).
Closes: #1256
Approved by: jlebon
For many cases of commit, we can actually optimize things by simply "adopting"
the object rather than writing a new copy. For example, in rpm-ostree package
layering.
We can only make that optimization though if we take ownership of the file. This
commit hence adds an API where a caller tells us to do so. For now, that just
means we `unlink()` the files/dirs as we go, but we can now later add the
"adopt" optimization.
Closes: #1255
Approved by: jlebon
What the deltas code is doing is weird/unfortunate. The name
`ot_variant_read()` conflicts too much with `ot_variant_read_fd()`.
Since nothing else uses it, move it into the deltas code.
Closes: #1254
Approved by: jlebon
A lot of the libostree code is honestly too complex for its
own good (this is mostly my fault). The way we do HTTP writes
is still one of those. The way the fetcher writes tempfiles,
then reads them back in is definitely one of those.
Now that we've dropped the "partial object" bits in:
https://github.com/ostreedev/ostree/pull/1176 i.e. commit
0488b4870e
we can simplify things a lot more by having the fetcher
return an `O_TMPFILE` rather than a filename.
For trusted archive mirroring, we need to enable linking
in the tmpfiles directly.
Otherwise for at least content objects they're compressed, so we couldn't link
them in. For metadata, we need to do similar logic to what we have around
`mmap()` to only grab a tmpfile if the size is large enough.
Closes: #1252
Approved by: jlebon
Buried in this large patch is a logical fix:
```
- if (!map)
- return glnx_throw_errno_prefix (error, "mmap");
+ if (map == (void*)-1)
+ return glnx_null_throw_errno_prefix (error, "mmap");
```
Which would have helped me debug another patch I was working
on. But it turns out that actually correctly checking for
errors from `mmap()` triggers lots of other bugs - basically
because we sometimes handle zero-length variants (in detached
metadata). When we start actually returning errors due to
this, things break. (It wasn't a problem in practice before
because most things looked at the zero size, not the data).
Anyways there's a bigger picture issue here - a while ago
we made a fix to only use `mmap()` for reading metadata from disk
only if it was large enough (i.e. `>16k`). But that didn't
help various other paths in the pull code and others that were
directly doing the `mmap()`.
Fix this by having a proper low level fs helper that does "read all data from
fd+offset into GBytes", which handles the size check. Then the `GVariant` bits
are just a clean layer on top of this. (At the small cost of an additional
allocation)
Side note: I had to remind myself, but the reason we can't just use
`GMappedFile` here is it doesn't support passing an offset into `mmap()`.
Closes: #1251
Approved by: jlebon
Appease Coverity by using the same condition for both the ternary check
and the if-condition later on. It should be smart enough to figure out
that `dir_enum == NULL` implies that `dfd_iter != NULL` from the
assertion at the top of the function.
Coverity CID: #1457318Closes: #1250
Approved by: cgwalters
Spotted while reading through the code, it looks like the
copy_detached_metadata() call is accidentally omitted if a hardlink
already exists for the .commit object.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1242
Approved by: cgwalters
This commit adds debug output whenever libostree reads GPG keys, which
can come from different locations in the file system. This is especially
helpful in debugging "GPG signatures found, but none are in trusted
keyring" errors, which in my case was caused by OSTree looking in
/usr/local/share/ostree/trusted.gpg.d/ rather than
/usr/share/ostree/trusted.gpg.d/.
Closes: #1241
Approved by: cgwalters
I'm regretting a bit having the `guint8*csum` variant of checksums
except for the serialized form. Once we start doing processing
it's easier to just have it remain hex.
Do an on-stack conversion for the metadata scanning function; this
drops a malloc and also just looks nicer.
Also add some long-awaited function comments to the two.
Closes: #1240
Approved by: jlebon
These shouldn’t change the bloom filter’s behaviour at all, but make it
a bit more obvious what the programmatical limitations are on the sizes
it can deal with.
In reality, those sizes should never be reached because they won’t fit
in a DNS-SD record.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1239
Approved by: cgwalters
I was reading the pull code for the last release, and spotted
a bug in commit f923c2e1ea - in
the case where the ref doesn't exist, we don't set an error,
tripping an assertion in the main code.
The previous code wanted the ref to always exist, so just flip back the boolean
for "ignore noent". I moved the `g_strchomp()` just into the HTTP path - if a
local repo is corrupted in this way it's something to fix in that repo.
Closes: #1238
Approved by: pwithnall
Compiling with -Wconversion warns on this line, as the conversion from
guint64 to guint8 is implicit (but safe: there is no bug here, since the
implicit cast is applied after the modulus arithmetic).
Make the cast explicit to silence -Wconversion.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1231
Approved by: cgwalters
There was an implicit cast from guint64 to gsize (which is 32-bit on
armhf, for example) before the modulus arithmetic which safely narrows
the index.
Fix that by using a guint64 intermediate variable and making the cast
explicit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1231
Approved by: cgwalters
We can't use the cache if the file we want to commit has been modified
by the client through the file info or xattr modifiers. We would
prematurely look into the cache in `write_dfd_iter_to_mtree_internal`,
regardless of whether any filtering applied.
We remove that path there, and make sure that we only use the cache if
there were no modifications. We rename the `get_modified_xattrs` to
`get_final_xattrs` to reflect the fact that the xattrs may not be
modified.
One tricky bit that took me some time was that we now need to store the
st_dev & st_ino values in the GFileInfo because the cache lookup relies
on it. I'm guessing we regressed on this at some point.
This patch does slightly change the semantics of the xattr callback.
Previously, returning NULL from the cb meant no xattrs at all. Now, it
means to default to the on-disk state. We might want to consider putting
that behind a flag instead. Though it seems like a more useful behaviour
so that callers can only override the files they want to without losing
original on-disk state (and if they don't want that, just return an
empty GVariant).
Closes: #1165Closes: #1170
Approved by: cgwalters
I was trying to do a change for rpm-ostree to use
`OSTREE_REPO_COMMIT_MODIFIER_FLAGS_CANONICAL_PERMISSIONS`
for container builds with `bare-user-only,` but hit an assertion here
ultimtely because we weren't setting `standard::type`.
Rather than hand-rolling `GFileInfo` creation, use the stat buffer conversion
code which is more robust and used in multiple places already.
Closes: #1227
Approved by: jlebon
In particular I'd like to get the copy fix in, since it might affect users for
the keyring bits.
Update submodule: libglnx
Closes: #1225
Approved by: jlebon
I noticed this while debugging why I was seeing "2 metadata objects" fetched for
a different PR. I knew 1 was detached meta, but the other turned out to be this.
There's no reason to request a delta if the ref is unchanged.
Closes: #1220
Approved by: jlebon
Propagate the refspec_name from the OstreeRemote returned by an
OstreeRepoFinder through to the set_ref() call.
This changes ostree_repo_pull_with_options() to accept the
previously-disallowed combination of passing override-remote-name in
options and also setting a remote name in remote_name_or_baseurl.
ostree_repo_pull_with_options() will continue to pull using the remote
config named in remote_name_or_baseurl as before; but will now use the
remote name from override-remote-name when it’s setting the refs at the
end of the pull. This is consistent with the documentation for
override-remote-name.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1202
Approved by: cgwalters
When pulling from a dynamic (peer to peer) remote, the remote’s name is
set to a unique, generated string which doesn’t exist in repo/config. If
doing a non-mirror pull, however, we don’t want to use this name in the
refspecs for newly created or updated refs — we want to use the name of
the remote which provided the keyring for the pull (this will be a
remote from repo/config whose collection ID matches that being used for
the peer to peer pull).
Store both names in OstreeRemote. The name to use for refspecs is stored
as refspec_name, and is typically NULL unless it differs from name.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1202
Approved by: cgwalters
Instead of returning just the keyring filename, return the entire
OstreeRemote, which has the keyring filename as one of its members. This
will simplify some upcoming changes, and allows slightly improved debug
logging.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1202
Approved by: cgwalters
If override-remote-name is specified in the options to
ostree_repo_pull_with_options(), but the remote_name_or_baseurl argument
is also set to a remote name, the override-remote-name would be leaked.
Note that this is currently an invalid configuration, so this leak is
basically never hit.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1202
Approved by: cgwalters
Followup for recent work in commits:
- 8a7a359709
- 1a9a473580
Keep track of how many objects we imported, and print that for `ostree
pull-local` (also do this even if noninteractive, like we did for `pull`).
In implementing this at first I used separate variables for import
from repo vs import from localcache, but that broke some of the
tests that checked those values.
It's easier to just merge them; we know from looking at whether or not
`remote_repo_local` is set whether or not we were doing a "HTTP pull with
localcache" versus a true `pull-local` and can use that when rendering status.
Closes: #1219
Approved by: jlebon
This is more efficient in the non-collection case; in the collection
case, the implementation of ostree_repo_resolve_collection_ref() needs
to be rewritten to improve efficiency.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1182
Approved by: cgwalters
This is a parallel for ostree_repo_resolve_rev_ext() which works on
collection–refs. At the moment, the implementation is simple and uses
ostree_repo_list_collection_refs(). In future, it could be rewritten to
check the checksum directly rather than enumerating all
potentially-relevant checksums.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1182
Approved by: cgwalters
Previously, collection–refs could only be pulled from a repository if it
had a summary file (which listed them). There was no way to pull from a
local repository which doesn’t have a summary file, and where the refs
were stored as refs/remotes/$remote/$ref, with a config section linking
that $remote to the queried collection ID.
Fix that by explicitly supporting pull_data->remote_repo_local in
fetch_ref_contents().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1182
Approved by: cgwalters
I now think commit fab1e113db was a mistake;
because it breaks the mental model that at least I'd built up that "local repos
don't have checksums verified, HTTP does".
For example, a problem with this is (with that mental model in place) it's easy
for people who set up mirrors like this to then do local pulls, and at that
point we've done a deployment with no checksum verification.
Further, since then we did PR #671 AKA commit 3d38f03 which is really most of
the speed hit.
So let's switch the default even for this case to doing checksum verification,
and add `ostree pull --http-trusted`. People who are in situations where they
know they want this can find it and turn it on.
Closes: https://github.com/ostreedev/ostree/issues/1211Closes: #1212
Approved by: jlebon
Rather than carrying two booleans, just convert `OstreeRepoPullFlags`
into `OstreeRepoImportFlags`. This allows us to drop an internal
wrapper function and just directly call `_ostree_repo_import_object()`.
This though reveals that our mirroring import path doesn't check the
`OSTREE_REPO_PULL_FLAGS_UNTRUSTED` flag...it probably should.
Prep for further work.
Closes: #1212
Approved by: jlebon
Make the "local repo" processing conditional the same as the "localcache" bits;
this is really just a de-indent. Also add some comments. Prep for further work.
Closes: #1212
Approved by: jlebon
Noticed this while reading the code. The `child` var hasn't been
initialized yet at the time we throw this error (and even then, it's
only conditionally initialized). To be nice, let's just always calculate
the child path and pass that along.
Also do some minor style porting to decl near use.
Closes: #1216
Approved by: cgwalters
Add a few comments for each of the central functions used for committing
data from a directory. Took me a bit to understand the relationship
between those functions.
Closes: #1216
Approved by: cgwalters
This fixes up the last of the embarassing bits I saw from
the stack trace in:
https://github.com/ostreedev/ostree/issues/1184
We had a hardlink fast path, but that doesn't apply across
devices, which occurs in two notable cases:
- Installer ISO with local repo
- Tools like pungi that copy the repo to a local snapshot
Obviously there are a lot of subtleties here around things like the
bare-user-only conversions as well as exactly what data we copy. I think to get
better test coverage we may want to add `pull-local --no-hardlink` or so.
Closes: #1197
Approved by: jlebon
Add this as an additional well-known directory which is checked on
mounted removable drives to see if it contains OSTree repos we can pull
refs from.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://github.com/ostreedev/ostree/issues/1210Closes: #1213
Approved by: cgwalters
For the old `OSTREE_REPO_MODE_ARCHIVE_Z2`. Use it mostly tree
wide except for the repo finder tests (to avoid conflicting with
some outstanding PRs).
Just noted another user coming in some of those tests and wanted to do a
cleanup.
Closes: #1209
Approved by: jlebon
We added a `.dir-locals.el` in commit: 9a77017d87
There's no need to have it per-file, with that people might think
to add other editors, which is the wrong direction.
Closes: #1206
Approved by: jlebon
Add a hash function for OstreeRepo instances, which relies on the repo
being open, and hence being able to hash the device and inode of its
root directory.
Add unit tests for this and ostree_repo_equal().
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://github.com/ostreedev/ostree/issues/1191Closes: #1205
Approved by: cgwalters
Such an evil bug 🙈. I was just reading an strace trying to figure out what was
going on, and noticed we had the `XXXXXX` in the lockfile name. It was only
after that I realized that that this might *be* the cause of the skopeo issue.
This is another case where we definitely need more test coverage of things that
actually use the API multiple times in process; might look at dusting off the
work for the rpm-ostree test.
Closes: https://github.com/ostreedev/ostree/issues/1196Closes: #1204
Approved by: jlebon
While opening a repo we've recorded the device/inode for a while; use it to
avoid calling `linkat()` during object import if we know it's going to fail.
Closes: #1193
Approved by: jlebon
Conceptually `ostree-repo-pull.c` should be be written using
just public APIs; we theoretically support building without HTTP
for people who just want to use the object store portion and
do their own fetching.
We have some nontrivial behaviors in the pull layer though; one
of those is the "bareuseronly" verification. Make a new internal
API that accepts flags, move it into `commit.c`. This
is prep for further work in changing object import to support
reflinks.
Closes: #1193
Approved by: jlebon
There are use cases for not syncing at all; think build cache repos, etc. Let's
be consistent here and make sure if fsync is disabled we do no sync at all.
I chose this opportunity to add tests using the shiny new strace fault
injection. I can forsee using this for a lot more things, so I made
the support for detecting things generic.
Related: https://github.com/ostreedev/ostree/issues/1184Closes: #1186
Approved by: jlebon
Update the comments and remove an unneeded variable to make it clear
that the find_remotes_async() / pull_from_remotes_async() functions use
the unsigned summary support.
This is a follow-up of commit 8c148eb7e "lib/repo-finder: Emit
gpg-verify-summary=false in dynamic remote config".
Closes: #1195
Approved by: pwithnall
I saw in a stack trace that the main thread was calling `exit()` even while
worker threads were alive and doing sha256/write/fsync etc. for objects.
The stack trace was a SEGV as the main thread was calling into library
`atexit()` handlers and we were a liblz4 destructor:
```
#0 0x00007f2db790f8d4 _fini (liblz4.so.1)
#1 0x00007f2dbbae1c68 __run_exit_handlers (libc.so.6)
```
(Why that library has a destructor I don't know offhand, can't find
it in the source in a quick look)
Anyways, global library destructors and worker threads continuing simply don't
mix. Let's wait for our outstanding operations before we exit. This is also a
good idea for projects using libostree as a shared library, as we don't want
worker threads outliving operations.
Our existing pull corruption tests exercise coverage here.
I added a new `caught-error` status boolean to the progress API, and use it the
commandline to tell the user that we're waiting for outstanding ops.
Closes: #1185
Approved by: jlebon
We have a lot of layers of abstraction here; let's fold in the `trusted`
conditional into the call, since that's all the public API we're using does
anyways.
Prep for a future patch around object copying during imports.
Closes: #1187
Approved by: jlebon
This was some incomplete planning from while the find_remotes() API was
being designed; now totally outdated.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1179
Approved by: cgwalters
See issue #1174 for the rationale behind this. In summary:
• It required two lists of collection–refs to be maintained: one in the
repository, and one pointing to the repository.
• It didn’t automatically work for live USBs of OSs based on OSTree
(where there’s always a repository at /ostree/repo).
• It was unnecessarily complex.
The new scheme allows a list of repositories to be searched, but without
needing a layer of indirection through their collection–refs. It adds
/ostree/repo and /.ostree/repo as well-known repository locations which
are always checked on a mounted volume (if they exist).
Update the unit tests accordingly.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
https://github.com/ostreedev/ostree/issues/1174Closes: #1179
Approved by: cgwalters
This will compare their root directory inodes to see if they are the
same repository on disk. A convenience method for the users of the
public API who can’t access OstreeRepo.inode.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1179
Approved by: cgwalters
Update libglnx, which is mostly port the repo stagedir code
to the new tmpdir API. This turned out to require some
libglnx changes to support de-allocating the tmpdir ref while
still maintaining the on-disk dir.
Update submodule: libglnx
Closes: #1172
Approved by: jlebon
Doing this in prep for libglnx tmpdir porting, but I think we should also do
this because the partial fetch code IMO was never fully baked; among other
things it was never integrated into the scheme we came up with for "boot id
sync" that we use for complete/staged objects.
There's a lot of complexity here that while we have some coverage for, I think
we need to refocus on the core functionality. The libcurl backend doesn't have
an equivalent to this today.
In particular for small objects, this is simply overly complex. The downside is
clearly for large objects like FAH's 61MB initramfs; not being able to resume
fetches of those is unfortunate.
In practice though, I think most people should be using deltas, and we need to
make sure deltas work for large objects anyways.
Further ultimately the peer-to-peer work should help a lot for people
with truly unreliable connections.
Closes: #1176
Approved by: jlebon
I was looking at fixing an `rpm-ostree livefs` bug where we need to replace
`/usr/lib/passwd`. It's obviously bad if that temporarily disappears 😉. My plan
is to do a subpath checkout of just `/usr/lib/{passwd,group}`.
Make this atomic (i.e. file always exists) by changing the logic to create a
temporary link in repo/tmp, then rename() it into place.
A bonus here is we kill one of the very few (only?) non-error-cleanup i.e.
"non-linear" `goto`s in the ostree codebase.
Closes: #1171
Approved by: jlebon
It turns out that librpm automatically merges identical files between
distinct packages, and this occurs in practice with Fedora today between
`chkconfig` and `initscripts` for exmaple.
Since we added this for rpm-ostree, we basically want to do what librpm does,
let's change the semantics to do a merge. While we're here rename
to `UNION_IDENTICAL`.
Closes: #1156
Approved by: jlebon
If the new configuration passed to ostree_write_config () tries to
update options for a remote defined in a separate config file, return an
error. Without this, the full configuration would contain duplicate
remote specifications, which would raise an error the next time the repo
is opened.
Closes: #1159
Approved by: cgwalters
The new libglnx `glnx_mkdtempat()` uses autocleanups, which
is inconvenient for this use case where we *don't* want autocleanups.
Since we don't need it to be fd-relative, just directly invoke
`g_mkdtemp_full()` which is fine for this use case.
Prep for updating libglnx.
Closes: #1161
Approved by: jlebon
This option allows a repo to explicitly opt out of adding new remotes in
a remotes configuration directory. This currently defaults to true for
system repos and false for non-system repos to maintain legacy behavior
that non-system repos don't add remotes in a configuration directory.
That would be problematic for flatpak, which specifies a remotes config
dir but adds remotes in ways that are incompatible with it.
So, what this really does is allow system repos to control whether they
want to add remotes in the config dir or not. That's important if your
flatpak repo is the system repo like at Endless.
Closes: #1134Closes: #1155
Approved by: cgwalters
There was only one tricky bit here around the ownership of the lines; I made use
of `g_steal_pointer()` to consistently track ownership, and converted to a `for`
loop while still preserving the loop logic around the last entry.
Closes: #1154
Approved by: jlebon
Steal some code from flatpak for this, which allows porting a few more things to
new style. I started on a public API version of this but was trying to roll some
other things into it and it snowballed. Let's do this version since it's easy
for now.
While here I changed things so that `generate_deployment_refs()` now just uses
`_set_ref_immediate()` rather than requring a txn.
Also, AFAICS there was no test coverage of `generate_deployment_refs()`; I tried
commenting it out and at least `admin-test.sh` passed. Add some coverage of this
- I verified that with this commenting out bits of that function cause the test
to fail.
Closes: #1132
Approved by: jlebon
I resisted trying to do anything invasive here like fd-relative porting as our
coverage is weak. But this was all straightforward porting to decl-after-stmt
style.
Closes: #1153
Approved by: jlebon
Before commit e0346c1, a non-system repo could specify
remotes-config-dir and have remotes read from there. However, adding
remotes would only be done in the config dir for a system repo. Restore
that by respecting remotes-config-dir when no sysroot is found and
adding back the ostree_repo_is_system() check when adding remotes.
Closes: #1133Closes: #1151
Approved by: cgwalters
Include non-default deployments in the uEnv.txt file imported by
U-Boot. All the configurations beside the defaults will have
numerical suffix E.G. "kernel_image2" or "bootargs2".
Those U-Boot environment variables may be used from interactive boot
prompt or from "altbootcmd" script.
Closes: #1138
Approved by: cgwalters
Split the code that merge the system uEnv to new function. While we're here,
clean up the logic to e.g. use `ot_openat_ignore_enoent()`.
Closes: #1138
Approved by: cgwalters
There were some important ones there like a random `syncfs()`. The remaining
users are mostly blocked on the "fstatat enoent" case, I'll wait to port those.
Closes: #1150
Approved by: jlebon
Add keys from the signing homedir to the GpgVerifier used to look
for duplicate signatures. This will allow signatures from subkeys
to be canonicalised and recognised as already signed despite the
differing key ID, avoiding duplicate signatures.
Closes: https://github.com/ostreedev/ostree/issues/608Closes: #1092
Approved by: cgwalters
In the case the signature time was bad, a line prefix was missing from the
result of `ostree_gpg_verify_result_describe_variant()`.
Closes: #1092
Approved by: cgwalters
Revert the switch of _FINGERPRINT to giving the primary key ID
rather than the signing key ID, and instead add the primary
key ID as a new attribute which is available if the key is not
missing.
Closes: https://github.com/ostreedev/ostree/issues/608Closes: #1092
Approved by: cgwalters
A lof of the functions here are async and have nontrivial exits, but these ones
are all sync were straightforward ports.
Not prep for anything, just chipping away at porting.
Closes: #1146
Approved by: jlebon
We have `ot_ensure_unlinked_at()` for the "ignore ENOENT" case, and
`glnx_unlinkat()` otherwise. Port all in-tree callers to one or the other as
appropriate.
Just noticed an unprefixed error in the refs case and decided to do a tree-wide
check.
Closes: #1142
Approved by: jlebon
I'd mostly been skipping the GPG functions due to lack of autoptr for a few
things, but I noticed these bits were straightforward.
Closes: #1136
Approved by: jlebon
The vast majority of invocations of `ot_gpgme_error_to_gio_error()` were paired
with `g_prefix_error()`; let's combine them for the same reason we do
`glnx_throw_errno_prefix()`. For the few cases that don't we might as well add
some prefix.
I also changed it to `return FALSE` in prep for more style porting.
Closes: #1135
Approved by: jlebon
However, they weren't showing up in the output HTML and I have
no idea why; I looked at what we're doing and it looks close enough
to what's going on in `GDBusConnection` that I was using as a reference.
I'm not going to spend a lot of time to debug it right now.
Closes: #1140
Approved by: jlebon
In almost all places. There are just a few exceptions; one tricky bit for
example is that the repo config must still have `mode=archive-z2`, since
`archive` used to mean something else. (We could very likely just get rid of
that check, but eh, later).
I also added a test that one can still do `ostree repo init --mode=archive-z2`.
Closes: #1125
Approved by: jlebon
This is for issue projectatomic/rpm-ostree#365,
an extra option of overwrite mode is added to the checkout command
so that when there is "non-directory" file already exist
during checkout, the error will be handled.
Some tests are added for regression
Closes: #1116
Approved by: cgwalters
The new --selinux-policy added in [0] exposed a subtle issue in the way
we handle labeling during commit. The CI system in rpm-ostree hit this
when trying to make use of it[1].
Basically, because of the way we use a GVariant to represent xattrs, if
a file to be committed already has an SELinux label, the xattr object
ends up with *two* label entries. This of course throws off fsck later
on, since the checksum will have gone over both entries, even though the
on-disk file will only have a single label (in which the second entry
wins).
I confirmed that the `fsck` added in the installed test fails without
the rest of this patch.
[0] https://github.com/ostreedev/ostree/pull/1114
[1] https://github.com/projectatomic/rpm-ostree/pull/953Closes: #1121
Approved by: cgwalters
For rpm-ostree, I want to move RPM files in `/boot` to `/usr/lib/ostree-boot`.
This is currently impossible without forking the libarchive code. Supporting
this is pretty straightforward; we already had pathname translation in
the libarchive code, we just need to expose it as an option.
On the command line side, I chose to wrap this as a regexp. That should be good
enough for a lot of use cases; sophisticated users should as always be making
use of the API. Note that this required some new `#ifdef LIBARCHIVE` bits to use
the new API. Following previous patterns here, we use the new API only if a
relevant option is enabled, ensuring unit test coverage of both paths.
For the test cases, I ended up changing the accounting to avoid having to
multiply the test count.
Closes: #1105
Approved by: jlebon
This is a follow-up to https://github.com/ostreedev/ostree/pull/1097.
We make simple_write_deployment smart enough so that it can be used for
rpm-ostree's purposes. This is mostly an upstreaming of logic that
already existed there.
Notably we correctly append NOT_DEFAULT deployments *after* the booted
deployment and we now support RETAIN_PENDING and RETAIN_ROLLBACK flags
to have more granularity on deployment pruning.
Expose these new flags on the CLI using new options (as well as expose
the previously existing NOT_DEFAULT flag as --not-as-default).
I couldn't add tests for --retain-pending because the merge deployment
is always the topmost one. Though I did check that it worked in a VM.
Closes: #1110
Approved by: cgwalters
When working with collections it can be useful to see remote refs rather
than just local and mirrored ones. This commit changes the "ostree refs
-c" output to include remote refs, and includes remote refs with
collection IDs in summary file generation as well. The former behavior
is consistent with how "ostree refs" works, and the latter behavior is
useful in facilitating P2P updates even when mirrors haven't been
configured.
To accomplish this, OstreeRepoListRefsExtFlags was extended with an
EXCLUDE_REMOTES flag. This was done rather than an INCLUDE_REMOTES flag
so that existing calls to ostree_repo_list_refs_ext continue to have the
same behavior. This flag was added to ostree_repo_list_collection_refs
(which is an experimental API break).
Also, add unit tests for the "refs -c" and summary file behavior, and
update relevant tests.
Closes: #1069
Approved by: cgwalters
Things like https://sourceware.org/libabigail/manual/abidiff.html
look interesting but in a brief look I couldn't work out
how to conveniently use them for quick ABI sanity checking without
doing a diff from a previous build (which we could do but would be
more involved).
This way will at least catch struct ABI breaks on x86_64 which
I think we'd be most likely to do accidentally when trying
to use one of the previous unused values.
I found the hole values via gdb's `pahole` command.
Closes: #1108
Approved by: jlebon
This makes `ostree commit --tree=tar` honor `--owner-uid` and `--owner-gid`
for the root directory.
Prep for further commit filtering work, although mostly for the unit test cases;
this ensures we can use `ostree checkout` after autocreating a root directory.
Closes: #1104
Approved by: jlebon
The wrapping here is unnecessary, since `_ostree_repo_commit_modifier_apply()`
already does what this function did. Further, the return type was wrong.
Saw this while doing some libarchive work.
Closes: #1104
Approved by: jlebon
For both flatpak and ostree-as-host, we really want to verify up front during
pulls that we're not being downgraded. Currently both flatpak and
`OstreeSysrootUpgrader` do this before deployments, but at that point we've
already downloaded all the data, which is annoying.
Closes: https://github.com/ostreedev/ostree/issues/687Closes: #1055
Approved by: jlebon
When using the
OSTREE_SYSROOT_SIMPLE_WRITE_DEPLOYMENT_FLAGS_NOT_DEFAULT flag, the
deployment is said to be added after the booted or merge deployment.
Fix the condition to do so instead of adding it in the second place.
Closes: #1097
Approved by: cgwalters
Follow up to <https://github.com/ostreedev/ostree/pull/1079>; I was working on
the rpm-ostree updates for this, and I think it's more consistent if we have
`.img` here, since that's a closer match to the "remove $kver" that results in
`vmlinuz`. Also just best practice to have file suffix types where they make
sense.
The astute reader might notice this sneaks in a change where we'd crash if the
legacy bootdir didn't have an initramfs...yeah, should probably have test
coverage of that.
Closes: #1095
Approved by: jlebon
This is the new Fedora kernel standard layout; it has the advantage
of being in `/usr` like `/usr/lib/ostree-boot`, but it's not OSTree
specific.
Further, I think in practice forcing tree builders to compute the checksum is an
annoying stumbling block; since we already switched to e.g. computing checksums
always when doing pulls, the cost of doing another checksum for the
kernel/initramfs is tiny. The "bootcsum" becomes more of an internal
implementation detail.
Now, there is a transition; my current thought for this is that rpm-ostree will
change to default to injecting into both `/usr/lib/ostree-boot` and
`/usr/lib/modules`, and stop doing `/boot`, then maybe next year say we drop the
`/usr/lib/ostree-boot` by default.
A twist here is that the default Fedora kernel RPM layout (and what's in
rpm-ostree today) includes a kernel but *not* an initramfs in
`/usr/lib/modules`. If we looked only there, we'd just find the kernel. So we
need to look in both, and then special case this - pick the legacy layout if we
have `/usr/lib/modules` but not an initramfs.
While here, rework the code to have an `OstreeKernelLayout` struct which makes
dealing with all of the variables nicer.
Closes: #1079
Approved by: jlebon
I actually don't quite know what the version inheritance really does, but let's
be safe and fix this. I'm being conservative here and fixing it to inherit from
2017.8, skipping .9 since that doesn't have a parent.
Related: https://github.com/ostreedev/ostree/issues/1087Closes: #1088
Approved by: jlebon
In the production case since we used `daemon()` our stderr is `/dev/null`¹
there's not much use in logging errors from `FITHAW` or `exit(1)`, and doing so
breaks the test suite which checks the return from `waitpid()`. There's nothing
we can really do if `FITHAW` fails, and in most of those cases `EINVAL`,
`EOPNOTSUPP`, we *shouldn't* do anything anyways.
¹ Though perhaps we should set up the systemd journal, but let's not
go there right now.
Closes: #1084
Approved by: jlebon
I added `waitpid()`, but that didn't actually help because we were
`daemon()`izing. Don't daemonize if we're testing so that we can `waitpid()`.
Note I still haven't reproduced this race locally, but I'm pretty sure this will
fix it.
While here, actually check the return value from `waitpid()` just in case
something goes wrong there.
Closes: #1084
Approved by: jlebon
Just a random cozy patch I made while perusing the codebase. When
determining if two OstreeDeployment objects are the same, rather than
just checking for NULL, we can just directly check for equality of
pointers to also catch the trivial case.
Closes: #1082
Approved by: cgwalters
This is mostly the `copy_file_range` changes plus the Coverity files.
```
Colin Walters (4):
localalloc: Abort on EBADF from close() by default
local-alloc: Remove almost all macros like glnx_free, glnx_unref_variant
console: Fix Coverity NULL deref warning
fdio: Merge systemd code to use copy_file_range(), use FICLONE
Jonathan Lebon (1):
console: trim useless check
Matthew Leeds (1):
dirfd: Fix typo in comment
Philip Withnall (1):
glnx-console: Add missing NULL check before writing out text
```
Update submodule: libglnx
Closes: #1081
Approved by: jlebon
This essentially completes our fd-relative conversion.
While here, I cleaned up the semantics of `ostree_repo_create()` and
`ostree_repo_create_at()` to be more atomic - basically various scripts were
testing for the `objects` subdirectory, so let's formalize that.
Closes: #820
Approved by: jlebon
If one of the localcache repos has the exact same commit we resolved
from the remote, then we need to make sure to mark it as partial so that
we download the full tree.
Closes: #1074Closes: #1076
Approved by: cgwalters
Saw this in a PR result; we need to wait for the child to have written its
result to stderr before we exit, otherwise the test suite may not read it in
time.
Closes: #1070
Approved by: jlebon
This will allow us to drop the awful hack in rpm-ostree where we watch our own
stdout. In general, libraries shouldn't write to stdout.
Also we can kill the systemd journal wrapper code. There's some duplication at
each call site now...but it's easier than trying to write a `sd_journal_send()`
wrapper.
I was originally going to have this emit all of the structured data too as a
`GVariant` but decided it wasn't worth it right now.
Closes: #1052
Approved by: jlebon
Add a new error domain for GPG signing/verification errors, and use it
throughout libostree for describing verification errors. This replaces
various uses of G_IO_ERROR_FAILED, and one instance of
G_IO_ERROR_NOT_FOUND (for which some code in ot-builtin-show.c had to be
changed to ensure it was still handled correctly).
The use of a separate error domain allows failures in GPG operations to
be handled separately from network failures (where the summary file
could not be found to be downloaded, for example) or timeouts.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1064Closes: #1071
Approved by: mbarnes
I'd like to move the new canonical kernel directory to `/usr/lib/modules/$kver`,
as Fedora has done. The `get_kernel_from_tree()` function now abstracts over
parsing the data (src vs destination filenames, as well as checksum) in
preparation for adding the new case.
In preparation for this, let's change the current test suite to use the
*current* directory of `/usr/lib/ostree-boot`, and also add coverage of `/boot`.
Closes: #1053
Approved by: jlebon
When returning results from finding repos, set gpg-verify-summary=false
in their configs, since any pulls from such remotes will necessarily
involve collection IDs, and hence should be using the unsigned summary
support. In the intended deployment mode for P2P transmission of OSTree
refs, summaries *cannot* be signed, so setting gpg-verify-summary=true
would cause all the pulls to fail.
The unsigned summary support is the move of repository metadata from
the summary file (not spliceable) to the well-known ostree-metadata ref
(spliceable, as it can exist for multiple collection IDs in the same
repository).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1066
Approved by: cgwalters
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
The API for downloading a summary file can legitimately return NULL for
the summary file contents when it returns TRUE (success). This indicates
an error 404 — the summary file was not found.
Two call sites were not handling that correctly, which was causing later
assertion failures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1061Closes: #1065
Approved by: cgwalters
(remaining > 0) is asserted by the loop condition, and remaining is not
modified between that check and the G_UNLIKELY — so the condition in the
G_UNLIKELY will always be true.
Spotted by Coverity as issue #1452617.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1059
Approved by: cgwalters
William Manley
Colin Walters
Gatis Paeglis
Simon McVittie
Marcus Folkesson
Philip Withnall
Matthew Leeds
Dan Nicholson
Joaquim Rocha
Dusty Mabe
Kalev Lember
Shaun Taheri
Alexander Larsson
Jonathan Lebon
Matthew Leeds
Anton Gerasimov
Guy Shapiro
Robert McQueen
Ruixin