In almost all places. There are just a few exceptions; one tricky bit for
example is that the repo config must still have `mode=archive-z2`, since
`archive` used to mean something else. (We could very likely just get rid of
that check, but eh, later).
I also added a test that one can still do `ostree repo init --mode=archive-z2`.
Closes: #1125
Approved by: jlebon
This is for issue projectatomic/rpm-ostree#365,
an extra option of overwrite mode is added to the checkout command
so that when there is "non-directory" file already exist
during checkout, the error will be handled.
Some tests are added for regression
Closes: #1116
Approved by: cgwalters
The new --selinux-policy added in [0] exposed a subtle issue in the way
we handle labeling during commit. The CI system in rpm-ostree hit this
when trying to make use of it[1].
Basically, because of the way we use a GVariant to represent xattrs, if
a file to be committed already has an SELinux label, the xattr object
ends up with *two* label entries. This of course throws off fsck later
on, since the checksum will have gone over both entries, even though the
on-disk file will only have a single label (in which the second entry
wins).
I confirmed that the `fsck` added in the installed test fails without
the rest of this patch.
[0] https://github.com/ostreedev/ostree/pull/1114
[1] https://github.com/projectatomic/rpm-ostree/pull/953Closes: #1121
Approved by: cgwalters
For rpm-ostree, I want to move RPM files in `/boot` to `/usr/lib/ostree-boot`.
This is currently impossible without forking the libarchive code. Supporting
this is pretty straightforward; we already had pathname translation in
the libarchive code, we just need to expose it as an option.
On the command line side, I chose to wrap this as a regexp. That should be good
enough for a lot of use cases; sophisticated users should as always be making
use of the API. Note that this required some new `#ifdef LIBARCHIVE` bits to use
the new API. Following previous patterns here, we use the new API only if a
relevant option is enabled, ensuring unit test coverage of both paths.
For the test cases, I ended up changing the accounting to avoid having to
multiply the test count.
Closes: #1105
Approved by: jlebon
This is a follow-up to https://github.com/ostreedev/ostree/pull/1097.
We make simple_write_deployment smart enough so that it can be used for
rpm-ostree's purposes. This is mostly an upstreaming of logic that
already existed there.
Notably we correctly append NOT_DEFAULT deployments *after* the booted
deployment and we now support RETAIN_PENDING and RETAIN_ROLLBACK flags
to have more granularity on deployment pruning.
Expose these new flags on the CLI using new options (as well as expose
the previously existing NOT_DEFAULT flag as --not-as-default).
I couldn't add tests for --retain-pending because the merge deployment
is always the topmost one. Though I did check that it worked in a VM.
Closes: #1110
Approved by: cgwalters
When working with collections it can be useful to see remote refs rather
than just local and mirrored ones. This commit changes the "ostree refs
-c" output to include remote refs, and includes remote refs with
collection IDs in summary file generation as well. The former behavior
is consistent with how "ostree refs" works, and the latter behavior is
useful in facilitating P2P updates even when mirrors haven't been
configured.
To accomplish this, OstreeRepoListRefsExtFlags was extended with an
EXCLUDE_REMOTES flag. This was done rather than an INCLUDE_REMOTES flag
so that existing calls to ostree_repo_list_refs_ext continue to have the
same behavior. This flag was added to ostree_repo_list_collection_refs
(which is an experimental API break).
Also, add unit tests for the "refs -c" and summary file behavior, and
update relevant tests.
Closes: #1069
Approved by: cgwalters
Things like https://sourceware.org/libabigail/manual/abidiff.html
look interesting but in a brief look I couldn't work out
how to conveniently use them for quick ABI sanity checking without
doing a diff from a previous build (which we could do but would be
more involved).
This way will at least catch struct ABI breaks on x86_64 which
I think we'd be most likely to do accidentally when trying
to use one of the previous unused values.
I found the hole values via gdb's `pahole` command.
Closes: #1108
Approved by: jlebon
This makes `ostree commit --tree=tar` honor `--owner-uid` and `--owner-gid`
for the root directory.
Prep for further commit filtering work, although mostly for the unit test cases;
this ensures we can use `ostree checkout` after autocreating a root directory.
Closes: #1104
Approved by: jlebon
The wrapping here is unnecessary, since `_ostree_repo_commit_modifier_apply()`
already does what this function did. Further, the return type was wrong.
Saw this while doing some libarchive work.
Closes: #1104
Approved by: jlebon
For both flatpak and ostree-as-host, we really want to verify up front during
pulls that we're not being downgraded. Currently both flatpak and
`OstreeSysrootUpgrader` do this before deployments, but at that point we've
already downloaded all the data, which is annoying.
Closes: https://github.com/ostreedev/ostree/issues/687Closes: #1055
Approved by: jlebon
When using the
OSTREE_SYSROOT_SIMPLE_WRITE_DEPLOYMENT_FLAGS_NOT_DEFAULT flag, the
deployment is said to be added after the booted or merge deployment.
Fix the condition to do so instead of adding it in the second place.
Closes: #1097
Approved by: cgwalters
Follow up to <https://github.com/ostreedev/ostree/pull/1079>; I was working on
the rpm-ostree updates for this, and I think it's more consistent if we have
`.img` here, since that's a closer match to the "remove $kver" that results in
`vmlinuz`. Also just best practice to have file suffix types where they make
sense.
The astute reader might notice this sneaks in a change where we'd crash if the
legacy bootdir didn't have an initramfs...yeah, should probably have test
coverage of that.
Closes: #1095
Approved by: jlebon
This is the new Fedora kernel standard layout; it has the advantage
of being in `/usr` like `/usr/lib/ostree-boot`, but it's not OSTree
specific.
Further, I think in practice forcing tree builders to compute the checksum is an
annoying stumbling block; since we already switched to e.g. computing checksums
always when doing pulls, the cost of doing another checksum for the
kernel/initramfs is tiny. The "bootcsum" becomes more of an internal
implementation detail.
Now, there is a transition; my current thought for this is that rpm-ostree will
change to default to injecting into both `/usr/lib/ostree-boot` and
`/usr/lib/modules`, and stop doing `/boot`, then maybe next year say we drop the
`/usr/lib/ostree-boot` by default.
A twist here is that the default Fedora kernel RPM layout (and what's in
rpm-ostree today) includes a kernel but *not* an initramfs in
`/usr/lib/modules`. If we looked only there, we'd just find the kernel. So we
need to look in both, and then special case this - pick the legacy layout if we
have `/usr/lib/modules` but not an initramfs.
While here, rework the code to have an `OstreeKernelLayout` struct which makes
dealing with all of the variables nicer.
Closes: #1079
Approved by: jlebon
I actually don't quite know what the version inheritance really does, but let's
be safe and fix this. I'm being conservative here and fixing it to inherit from
2017.8, skipping .9 since that doesn't have a parent.
Related: https://github.com/ostreedev/ostree/issues/1087Closes: #1088
Approved by: jlebon
In the production case since we used `daemon()` our stderr is `/dev/null`¹
there's not much use in logging errors from `FITHAW` or `exit(1)`, and doing so
breaks the test suite which checks the return from `waitpid()`. There's nothing
we can really do if `FITHAW` fails, and in most of those cases `EINVAL`,
`EOPNOTSUPP`, we *shouldn't* do anything anyways.
¹ Though perhaps we should set up the systemd journal, but let's not
go there right now.
Closes: #1084
Approved by: jlebon
I added `waitpid()`, but that didn't actually help because we were
`daemon()`izing. Don't daemonize if we're testing so that we can `waitpid()`.
Note I still haven't reproduced this race locally, but I'm pretty sure this will
fix it.
While here, actually check the return value from `waitpid()` just in case
something goes wrong there.
Closes: #1084
Approved by: jlebon
Just a random cozy patch I made while perusing the codebase. When
determining if two OstreeDeployment objects are the same, rather than
just checking for NULL, we can just directly check for equality of
pointers to also catch the trivial case.
Closes: #1082
Approved by: cgwalters
This is mostly the `copy_file_range` changes plus the Coverity files.
```
Colin Walters (4):
localalloc: Abort on EBADF from close() by default
local-alloc: Remove almost all macros like glnx_free, glnx_unref_variant
console: Fix Coverity NULL deref warning
fdio: Merge systemd code to use copy_file_range(), use FICLONE
Jonathan Lebon (1):
console: trim useless check
Matthew Leeds (1):
dirfd: Fix typo in comment
Philip Withnall (1):
glnx-console: Add missing NULL check before writing out text
```
Update submodule: libglnx
Closes: #1081
Approved by: jlebon
This essentially completes our fd-relative conversion.
While here, I cleaned up the semantics of `ostree_repo_create()` and
`ostree_repo_create_at()` to be more atomic - basically various scripts were
testing for the `objects` subdirectory, so let's formalize that.
Closes: #820
Approved by: jlebon
If one of the localcache repos has the exact same commit we resolved
from the remote, then we need to make sure to mark it as partial so that
we download the full tree.
Closes: #1074Closes: #1076
Approved by: cgwalters
Saw this in a PR result; we need to wait for the child to have written its
result to stderr before we exit, otherwise the test suite may not read it in
time.
Closes: #1070
Approved by: jlebon
This will allow us to drop the awful hack in rpm-ostree where we watch our own
stdout. In general, libraries shouldn't write to stdout.
Also we can kill the systemd journal wrapper code. There's some duplication at
each call site now...but it's easier than trying to write a `sd_journal_send()`
wrapper.
I was originally going to have this emit all of the structured data too as a
`GVariant` but decided it wasn't worth it right now.
Closes: #1052
Approved by: jlebon
Add a new error domain for GPG signing/verification errors, and use it
throughout libostree for describing verification errors. This replaces
various uses of G_IO_ERROR_FAILED, and one instance of
G_IO_ERROR_NOT_FOUND (for which some code in ot-builtin-show.c had to be
changed to ensure it was still handled correctly).
The use of a separate error domain allows failures in GPG operations to
be handled separately from network failures (where the summary file
could not be found to be downloaded, for example) or timeouts.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1064Closes: #1071
Approved by: mbarnes
I'd like to move the new canonical kernel directory to `/usr/lib/modules/$kver`,
as Fedora has done. The `get_kernel_from_tree()` function now abstracts over
parsing the data (src vs destination filenames, as well as checksum) in
preparation for adding the new case.
In preparation for this, let's change the current test suite to use the
*current* directory of `/usr/lib/ostree-boot`, and also add coverage of `/boot`.
Closes: #1053
Approved by: jlebon
When returning results from finding repos, set gpg-verify-summary=false
in their configs, since any pulls from such remotes will necessarily
involve collection IDs, and hence should be using the unsigned summary
support. In the intended deployment mode for P2P transmission of OSTree
refs, summaries *cannot* be signed, so setting gpg-verify-summary=true
would cause all the pulls to fail.
The unsigned summary support is the move of repository metadata from
the summary file (not spliceable) to the well-known ostree-metadata ref
(spliceable, as it can exist for multiple collection IDs in the same
repository).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1066
Approved by: cgwalters
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
The API for downloading a summary file can legitimately return NULL for
the summary file contents when it returns TRUE (success). This indicates
an error 404 — the summary file was not found.
Two call sites were not handling that correctly, which was causing later
assertion failures.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1061Closes: #1065
Approved by: cgwalters
(remaining > 0) is asserted by the loop condition, and remaining is not
modified between that check and the G_UNLIKELY — so the condition in the
G_UNLIKELY will always be true.
Spotted by Coverity as issue #1452617.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1059
Approved by: cgwalters
summary_timestamp is checked for non-NULL-ness above, and the function
bails if it’s NULL.
Fixes Coverity issue #1452616.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1059
Approved by: cgwalters
This parallels ostree_repo_remote_list_refs(), but returns a map of
OstreeCollectionRef → checksum, and includes refs from collection IDs
other than the remote repository’s main collection ID.
Use this in OstreeRepoFinderConfig to ensure that refs are matched
against even if they’re stored in the repository summary file’s
collection map, rather than its main ref map. This fixes false negatives
when searching for refs in some situations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
This catches a few failure modes in the pull code a little earlier,
before the incorrectly-NULL repo makes its way into a closure and a
worker thread, where the cause of the problem is harder to track down.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
As the comment explains, it’s possible for a result to be freed while
ref_to_checksum is NULL, even though normally the data structure
guarantees it’s non-NULL. This was causing crashes when results were
filtered out of a find-remotes call. Guard against that.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
The intended behaviour of ostree_repo_find_remotes() is to return
results which have the latest version of at least one of the requested
refs. Results which have some of the requested refs, but don’t have the
latest version of any of them, should be ignored. The logic to do this
was broken in the case that a result contained a positive number of the
requested refs, but none of them were the latest version. (It previously
worked when the result contained none of the requested refs.)
Fix the counting to work correctly in both cases.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1058
Approved by: cgwalters
If a delta happens to have zero objects, we could end up doing
a divide-by-zero when inferring endianness. In practice,
a zero-object delta isn't possible to generate I think, but
let's make sure the code is defensive all the same.
Spotted by Coverity.
Coverity CID: 1452208
Closes: #1041
Approved by: pwithnall
Part of cleaning up our usage of libglnx; we want to use what's in GLib where we
can.
Had to change a few .c files to `#include ostree.h` early on to pick up
autoptrs for the core types.
Closes: #1040
Approved by: jlebon
Colin Walters
Ruixin
Jonathan Lebon
Matthew Leeds
Guy Shapiro
Philip Withnall