Teach `ostree-finalize-staged.service` to check for a file in `/run` to
determine if it should do the finalization. This will be used in
RPM-OSTree, where we want to be able to separate out "preparing updates"
from "making update the default" for more fine-grained control. See:
https://github.com/projectatomic/rpm-ostree/issues/1748Closes: #1841
Approved by: cgwalters
This can happen if a deployment was staged and later cleaned up. Though
just as a helper when debugging issues, let's explicitly mention that
case.
Closes: #1841
Approved by: cgwalters
Rather than wrapping each instance of `sd_journal_*` with
`HAVE_SYSTEMD`, let's just add some convenience macros that are just
no-op if we're not compiling with systemd.
Closes: #1841
Approved by: cgwalters
Generate a grub2 config using the pending deployment, if a grub2
bootloader is detected in the sysroot. Allows grub2-mkconfig
to run if there are no previous deployments.
Fixes: #1774Closes: #1831
Approved by: jlebon
Otherwise, we'll be subject to whatever `umask` is currently. Normally,
processes should respect `umask` when creating files and directories,
but specifically for `ostree admin unlock` (or `rpm-ostree usroverlay`),
this poses a problem since e.g. a `/usr` with mode 0700 will break any
daemon that doesn't run as root and needs to read files under `/usr`,
such as polkitd.
This patch just does a `chmod()` after the `mkdir()`. An alternative
would be to do `umask(0000)` after forking into the child process
that'll call `mount()`, but that'd require also moving the `mkdir()`
calls into there, making for a more intrusive patch.
Closes: #1843
Approved by: cgwalters
Log a structured journal message when resolving the deployment path.
This will be used by the `rpm-ostree history` command to find past
deployments the system has booted into.
Closes: #1842
Approved by: cgwalters
Currently for a "normal" refspec you can choose to use
ostree_repo_resolve_rev_ext() instead of ostree_repo_resolve_rev() if
you only want to look at local refs (in refs/heads/) not remote ones.
This commit provides the analogous functionality for
ostree_repo_resolve_collection_ref() by adding a flag
OSTREE_REPO_RESOLVE_REV_EXT_LOCAL_ONLY and implementing it. This
will be used by Flatpak.
Closes: #1825
Approved by: jlebon
Currently the flag OSTREE_REPO_LIST_REFS_EXT_EXCLUDE_REMOTES for
ostree_repo_list_collection_refs() means that refs in refs/remotes/
should be excluded but refs in refs/mirrors/ should still be checked, in
addition to refs/heads/ which is always checked. However in some
situations you want to exclude both remote and mirrored refs and only
check local "owned" ones. So this
commit adds a new flag OSTREE_REPO_LIST_REFS_EXT_EXCLUDE_MIRRORS which
lets you exclude refs/mirrors/ from the listing.
This way we can avoid breaking API but still allow the listing of local
collection-refs.
The impetus for this change is that I'm changing Flatpak to make more
use of refs/mirrors, and we need a way to specify that a collection-ref
is local when using ostree_repo_resolve_collection_ref() in, for
example, the implementation of the repo command. The subsequent commit
will make the changes needed there.
Closes: #1825
Approved by: jlebon
My last commit "lib/repo-refs: Resolve collection-refs in-memory and in
parent repos" changed ostree_repo_resolve_collection_ref() to check the
in-memory set of refs *after* failing to find the ref on disk but that's
not what we want. We want to use the in-memory set of refs first,
because those are the most up to date commits, and then fall back to the
on-disk repo and finally fall back to checking any parent repo. This
commit makes such a change to the order of operations, which is
consistent with how ostree_repo_resolve_rev() works.
Aside from this change being logical, it also fixes some unit test
failures on an unmerged branch of flatpak:
https://github.com/flatpak/flatpak/pull/2705
Also, tweak the comments here.
Closes: #1825
Approved by: jlebon
Really, all `ostree admin finalize-staged` needs is access to `/sysroot`
and `/boot`. So let's activate it right after `local-fs.target` so that
it gets deactivated later in the shutdown process. This should allow us
to conflict with less services still running and possibly writing things
to `/etc`.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1672283Closes: #1840
Approved by: cgwalters
On at least one user's computer, g_getenv("http_proxy") returns the
empty string, so check for that and treat it as no proxy rather than
printing a warning.
See https://github.com/flatpak/flatpak/issues/2790Closes: #1835
Approved by: cgwalters
Currently the P2P code requires you to trust every remote you have
configured to the same extent, because a remote controlled by a
malicious actor can serve updates to refs (such as Flatpak apps)
installed from other remotes.[1] The way this attack would play out is
that the malicious remote would deploy the same collection ID as the
victim remote, and would then be able to serve updates for it.
One possible remedy would be to make it an error to configure remotes
such that two have the same collection ID but differing GPG keys. I
attempted to do that in Flatpak[2] but it proved difficult because it is
valid to configure two remotes with the same collection ID, and they may
then each want to update their keyrings which wouldn't happen
atomically.
Another potential solution I've considered is to add a `trusted-remotes`
option to ostree_repo_find_remotes_async() which would dictate which
keyring to use when pulling each ref. However the
ostree_repo_finder_resolve_async() API would still remain vulnerable,
and changing that would require rewriting a large chunk of libostree's
P2P support.
So this commit represents a third attempt at mitigating this security
hole, namely to have the client specify which remote to use for GPG
verification at pull time. This way the pull will fail if the commits
are signed with anything other than the keys we actually trust to serve
updates.
This is implemented as an option "ref-keyring-map" for
ostree_repo_pull_from_remotes_async() and
ostree_repo_pull_with_options() which dictates the remote to be used for
GPG verification of each collection-ref. I think specifying a keyring
remote for each ref is better than specifying a remote for each
OstreeRepoFinderResult, because there are some edge cases where a result
could serve updates to refs which were installed from more than one
remote.
The PR to make Flatpak use this new option is here[3].
[1] https://github.com/flatpak/flatpak/issues/1447
[2] https://github.com/flatpak/flatpak/pull/2601
[3] https://github.com/flatpak/flatpak/pull/2705Closes: #1810
Approved by: cgwalters
When writing a delta to a file this may not always be recorded
in the filename, and it's useful data.
Ref: https://mail.gnome.org/archives/ostree-list/2019-February/msg00000.html
This also required teaching `show` to accept a file path.
Note...for some reason `test-deltas.sh` breaks when run from
a tty - we get `SIGTTIN` which implies something is reading from
the tty but it wasn't obvious to me what.
Closes: #1823
Approved by: jlebon
In Silverblue right now, the boot menu title looks like this:
Fedora 29.20190301.0 (Workstation Edition) 29.20190301.0 (ostree)
This is because RPM-OSTree's `mutate-os-release` feature is enabled,
which injects the OSTree version string directly into `VERSION` and
`PRETTY_NAME`. So appending the version string again is a bit redundant.
Let's just do a simple substring check here before adding the version to
the title.
Closes: #1829
Approved by: cgwalters
The sysroot.bootloader key configures the bootloader
that OSTree uses when deploying a sysroot. Having this key
allows specifying behavior not to use the default bootloader
backend code, which is preferable when creating a first
deployment from the sysroot (#1774).
As of now, the key can take the values "auto" or "none". If
the key is not given, the value defaults to "auto".
"auto" causes _ostree_sysroot_query_bootloader() to be used
when writing a new deployment, which is the original behavior
that dynamically detects which bootloader to use.
"none" avoids querying the bootloader dynamically. The BLS
config fragments are still written to
sysroot/boot/loader/entries for use by higher-level software.
More values can be supported in future to specify a single
bootloader, different behavior for the bootloader code, or
a list of bootloaders to try.
Resolves: #1774Closes: #1814
Approved by: jlebon
Add ot_keyfile_get_value_with_default_group_optional() which allows
getting values from keys where the group is optional in the config
file. This is preparatory to add the sysroot.bootloader repo config
key, where the sysroot group is optional.
Closes: #1814
Approved by: jlebon
Rename ot_keyfile_get_string_as_list() to
ot_keyfile_get_string_list_with_separator_choice() which expresses
more clearly why the function is needed. Also shorten the
function comment.
Closes: #1814
Approved by: jlebon
Currently it's not an error to provide too many arguments to an ostree
config command. Change it so we print usage information in that case,
and update the unit tests.
Closes: #1743
Approved by: cgwalters
It seems cleaner to make the GKeyFile a g_autoptr variable and just
return rather than using the "goto out;" idiom.
Closes: #1743
Approved by: cgwalters
Currently there's a way to set a key to the empty string but there's no
way to unset it completely (remove the key from the group). This might
be helpful for instance if you want to temporarily set
"core.lock-timeout-secs" to a specific value for the duration of one
operation and then return it to the default after that operation
completes.
This commit implements an "unset" operation for the config command, adds
a unit test, and updates the man page.
Closes: #1743
Approved by: cgwalters
Currently the behavior of ostree_repo_resolve_rev() is that it tries to
resolve a ref to a commit by checking the refs/ directories, but also by
checking for in-memory ref-checksum pairs which are part of an
in-progress transaction and also by checking the parent repo if one
exists. Currently ostree_repo_resolve_collection_ref() only checks the
refs/ directories, so this commit makes its behavior analagous since it
is the analagous API which supports collection-refs.
The impetus for this was that currently Flatpak uses
ostree_repo_resolve_rev() to load a commit after doing a P2P pull in
flatpak_dir_do_resolve_p2p_refs(), but that assumes the ref came from
the same remote that originally provided it, which might not be the case
if more than one remote has the same collection ID configured. And
changing Flatpak to use ostree_repo_resolve_collection_ref() doesn't
work without this patch.
Closes: #1821
Approved by: pwithnall
This uses the OSTREE_REPO_REMOTE_CHANGE_REPLACE operation to add a
remote or replace an existing one. This is roughly the opposite of
--if-not-exists and will raise an error if both options are passed.
Closes: #1166
Approved by: cgwalters
Add the OSTREE_REPO_REMOTE_CHANGE_REPLACE operation to the
OstreeRepoRemoteChange enum. This operation will add a remote or replace
an existing one. It respects the location of the remote configuration
file when replacing and the remotes config dir settings when adding a
new remote.
Closes: #1166
Approved by: cgwalters
We have a `http2=[0|1]` remote config option; let's have the
`--disable-http2` build option define the default for that. This way
it's easy to still enable http2 for testing even if
we have it disabled by default.
Closes: #1798
Approved by: jlebon
Similar as available for u-boot (ce2995e1dc)
and syslinux (c5112c25e4), enable parsing
and writing devicetree filename into grub.cfg.
This is required by arm64-based devices running edk2 instead of u-boot
as the main bootloader (e.g. 96boards HiKey and HiKey960).
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Closes: #1790
Approved by: cgwalters
Even with the previous docstring, I didn't understand at first the
relationship between the `ostree-grub-generator` script and
`ostree-bootloader-grub2.c`. Throw some more docs to clarify things a
bit.
Closes: #1791
Approved by: cgwalters
We want a case where we can disable the min-free-space check. Initially,
it felt like to add a OSTREE_REPO_PULL_FLAGS_DISABLE_FREE_SPACE_CHECK but
the problem is prepare_transaction() does not have a OstreeRepoPullFlags
parameter which we can parse right here. On top of it, prepare_transaction()
enforces min-free-space check and won't let the transaction proceed if
the check failed.
This is pretty bad in conjunction with "inherit-transaction" as what
Flatpak uses. There is no way to disable this check unless we remove
it altogether from prepare_transaction.
This issue came out to light when flatpak wasn't able to write metadata
after fetching from remote:
[uajain@localhost ~]$ flatpak remote-info flathub org.kde.Platform//5.9
error: min-free-space-size 500MB would be exceeded
Metadata objects helps in housekeeping and restricting them means
restricting crucial UX (like search, new updates) functionalities
in clients like gnome-software. The error banners originated from
these issues are also abrupt and not much helpful to the user. This
is the specific instance of the issue this patches tries to address.
See https://github.com/flatpak/flatpak/issues/2139 for discussion.
Closes: #1779
Approved by: mwleeds
The way _ostree_repo_import_object() is written, a hardlink copy is only
attempted if the source repo is trusted, so update the docs for
ostree_repo_import_object_from_with_trust() to reflect that.
Closes: #1777
Approved by: cgwalters
This allows specifying gpgpath as list of
paths that can point to a file or a directory. If a directory path
is given, paths to all regular files in the directory are added
to the remote as gpg ascii keys. If the path is not a directory,
the file is directly added (whether regular file, empty - errors
will be reported later when verifying gpg keys e.g. when pulling).
Adding the gpgkeypath property looks like:
ostree --repo=repo remote add --set=gpgpath="/path/key1.asc,/path/keys.d" R1 https://example.com/some/remote/ostree/repoCloses#773Closes: #1773
Approved by: cgwalters
When falling back to copying objects when importing them into a
bare-user repo, we only actually need to transfer over the
`user.ostreemeta` xattr.
This allows the destination repo to be on a separate filesystem that
might not even support `security.selinux`. (I hit this while importing
over virtio-9p).
Closes: #1771
Approved by: cgwalters
I found this useful while hacking on rpm-ostree but I think it might be
useful enough to upstream. This stat is really helpful for validating
that a pipeline is hitting the devino cache sweet spot.
Closes: #1772
Approved by: cgwalters
Simon McVittie
Jonathan Lebon
Colin Walters
Robert Fairley
Matthew Leeds
Laurent Bonnans
Robert Fairley
Dan Nicholson
Ricardo Salveti
Matthias Clasen
Rafael Fonseca
Umang Jain
Luca Bruno
Alexander Larsson