We noticed that once a ref folder is created, there is no existing
command that can remove it. For example, once "foo/bar" is created,
even if the user deletes foo or all the refs under foo, the folder
will persist.
Now when the user attempts to create a ref "foo" either through commit
or refs --create, if a folder "foo" exists but is empty of refs, the
folder is removed and the new ref "foo" is created.
New unit tests in tests-ref.sh verify this functionality.
Closes: #354
Approved by: cgwalters
Import `gs_file_enumerator_iterate()` for the next six months or
so...after RHEL 7.3 is released I'm strongly considering hard
requiring 2.46 or so.
Likely at some point we should figure out how to share more "glib
backport" code with NetworkManager at least.
Closes: #341
Approved by: jlebon
This was the last caller of libgsystem that isn't
`gs_file_get_path_cached()`. I think the use case ostree has where
the same code can be called via command line and via a shared library
*and* via a daemon is rather unusual, so let's just copy the code for
logging from libgsystem into here.
For example rpm-ostree hard depends on a daemon mode, so it'll just
use `sd_journal` directly.
Closes: #341
Approved by: jlebon
I was easily reproducing a hang on pulls with thousands of requests on
current git master. The initial symptom seemed to be that there are
multiple code paths where we don't invoke
`session_thread_process_pending_queue()`. We really need to do
that any time we remove something from the outstanding queue,
to ensure it gets filled again.
A further issue is that we were tying the lifecycle of the pending
object to the `GTask`, but the task could be unref'd from the main
thread (via a `GSource` on the main thread), and that introduced
threadsafety issues, because the hash table and other data suddenly
could be concurrently modified.
Both of these need to be fixed together. First, we introduce
`Arc<Pending>`, and ensure that both the main and worker threads hold
references.
Second, we ensure that we re-process the queue *immediately* whenever
a task is done, inside the worker thread, rather than doing it
incidentally via an unref. This architecture is quite similar to what
the outside pull code is doing.
Closes: #350
Approved by: jlebon
The previous code was subject to a divide by zero if less than a
second had passed. Rework it so we only do the divide if more than a
second has passed.
Closes: #349
Approved by: Mathnerd314
I find the "-z2" is really a long ago relic of the past when I changed
the format. We no longer have anything to do with the original
`archive`, so let's start allowing people to type `--mode=archive`
which just looks saner.
At some point later I'll update the docs too, but it'll be an annoying
transition period as we'll have to say "On older OSTree, use -z2" etc.
Closes: #346
Approved by: giuseppe
Added the ability to create a ref (much like a git tag) for an
existing commit through "ostree refs EXISTING --create=NEWREF".
Previously the only way to create a new ref was by creating a new commit,
but refs --create allows multiple refs to point to the same commit.
The command will fail if:
- None/more than one existing ref is specified
- The specified EXISTING tag does not exist, or was not specified
- The specified NEWREF already exists, or is the name of a folder
Add unit tests in tests-ref.sh to verify above functionality
Closes: #340
Approved by: jlebon
Just noticed this while reading some code, we didn't have many manual
`out: close()` bits left, this pushes us over the edge to autocleanup
almost everywhere.
Closes: #332
Approved by: jlebon
The recent memleak fixes motivated me to look at the bitrotted code to
run invocations of `ostree` in the test suite underneath valgrind.
There are a few things here. First, update suppressions file from
libhif, since I recently worked on it.
When running *uninstalled* as we now support, we need
`libtool --mode=execute` in the mix so it expands out to
the uninstalled binary and we don't valgrind the intermediate shell.
However, it's harder than that because we chdir into a tmpdir,
which defeats the libtool logic. AFAICS, the only fix for this
is to determine the realbin path before we chdir, and then unfortunately
we need to change every use of `ostree` to `${OSTREE}` =(
Then this immediately breaks for me on RHEL7 because my ancient
copy of `valgrind-3.10.0-16.el7.x86_64` is unaware of syscall 306, i.e.
`syncfs`.
But let's do this first before I dive into that.
Closes: #292
Approved by: krnowak
As the docs say, `g_regex_match()` still allocates a match even if it
returns `FALSE`. Using `g_autoptr` is just plain better.
Closes: #292
Approved by: krnowak
This changes around a few things that didn't work for me:
* Section names seem to be ostree-* instead of libostree-*
* Also XML files are ostree-* (they didn't show up at all)
- gtk-doc doesn't seem to parse const _OSTREE_PUBLIC correctly
* pull documentation is now on the actual functions rather than stubs
* Update gitignore with some more files
And there some changes to make gtk-doc give fewer warnings (not finished)
Closes: #327
Approved by: cgwalters
This centralizes the ifdef's in one file, which will make it
easier to write new pull backends.
ostree-repo-pull.c is now built unconditionally
Closes: #327
Approved by: cgwalters
1 is a better choice than 0 because some programs use 0
as a special value; for example, GNU Tar warns of an
"implausibly old timestamp" with 0.
Closes: #330
Approved by: cgwalters
This kills another GSystem consumer...I think down the line I'd like
to do something like "detect whether file is > 1k if so, mmap,
otherwise just readall()" so we can use this helper in more places.
Closes: #319
Approved by: jlebon
We have a lot of "allow_noent" type wrapper functions since
a common pattern is to allow files to not exist, but still
throw cleanly on other issues.
This is another instance of that, and cleans up duplicated error
handling code.
Part of this is prep for moving away from `GFile` consumers.
Closes: #319
Approved by: jlebon
On 32-bit systems the modifier for printing 64bit values should be
%llu instead of %lu. Just use appriopriate macros that do the right
thing.
Closes: #329
Approved by: giuseppe
The --gpg-sign parameter will be used for signing the summary, not the
commit. This probably was copy-pasted from the ostree commit command.
Closes: #320
Approved by: cgwalters
The "no atime" thing was mostly useful only before "relative atime"
updates landed. Users who care about performance will turn it off
entirely anyways.
Closes: #316
Approved by: jlebon
In addition to generic fd relative porting,
this is a necessary preparatory step for libglnx porting, because
when I tried to use `g_mapped_file_new` I hit an issue with
it using a different error domain from GIO.
Thankfully libglnx consistently uses the GIO error domain, and here
we're now using it for the `open()` call.
Closes: #317
Approved by: jlebon
This is similar to changes Krzesimir has been doing recently - we
really don't need the ergonomics of floating refs since we have
autocleanups.
We should continue to change most of our code to sink refs.
Specifically here it was pretty broken that the `_map()` API was
sinking but the other two weren't, and this broke some refactoring I
was trying to do later.
Closes: #317
Approved by: jlebon
Bug 765429 said that not having a time estimate can be annoying
when working with large pulls.
There isn't any complex time estimation logic here - we just take
the number of bytes remaining and do a linear projection of
the bytes per second rate at the current point in time.
Closes: #318
Approved by: cgwalters
I happened to have the github page open with my commit after it was
merged, and then noticed a bug.
We still need to throw if we hit a non-`ENOENT` error.
Closes: #315
Approved by: giuseppe
This can be useful for validating the 3rd party data that is put in
the extensions directory and is signed with the same keys as commits
or the summary file.
Closes: #310
Approved by: cgwalters
Moved out setting up a GPG verifier to a separate function, as I would
like to use it for the any data verification function in the following
commit.
Closes: #310
Approved by: cgwalters
I plan to add a function for verifying any data which may return the
error about lack of trusted signatures, so let's avoid the redundancy
and put the check in the separate function.
Closes: #310
Approved by: cgwalters
It is quite similar to the already existing
ostree_raw_file_to_content_stream function, so I factored the common
part to a separate function. The difference is that we cannot report
the size of the resulting stream.
Can be useful for serving a "bare" repository as a faked "archive-z2"
repository.
Closes: #308
Approved by: cgwalters
This resolves the ambiguity for a message with a body but no subject,
and also hints that OSTree is using two bytes to store the empty
commit subject/body (when instead they could be stored, or rather,
not stored, as part of the metadata)
Closes: #305
Approved by: cgwalters
In practice, a lot of subjects are empty, because the commit date
and branch are sufficient identification. For example, rpm-ostree
does not use subjects. It also doesn't use the command-line ostree
commit tool, so this was not a problem there, but this makes the
behavior consistent.
Also adds a test that empty subjects and omitting the subject
are equivalent. The --timestamp is so that the commits do not
have different timestamps.
Closes: #305
Approved by: cgwalters
This allows automation to prefill the subject/body for the editor.
It could also be useful if some kind of "amend commit" functionality
was implemented.
Closes: #305
Approved by: cgwalters
Previously, the behavior was to run the editor if no subject or body was specified.
This led to using commit -s '' in scripts, to avoid running the editor.
In practice, manually editing commit messages is rare, whereas automated scripting
is common, so instead default to not running the editor and only run it when -e
is given.
Closes: #305
Approved by: cgwalters
Various places need to include libglnx.h for the autoptr backport
fallbacks to be there before ostree-autocleanups.h is included.
This fixes the build on centos7·
Closes: #309
Approved by: giuseppe
There's no need to allocate the variant builder on a heap, so allocate
it on the stack and avoid a memory leak at the same time.
Closes: #307
Approved by: cgwalters
To avoid breaking the ostree users we hide the autoptr setup behind an
OSTREE_WITH_AUTOCLEANUPS variable. The variable is set to 0 by
default, so users that want to start using them, have to define the
variable themselves to 1.
Probably after some transition period, the variable will be set 1 by
default.
This is conditional on GLib >= 2.44.0 being available. It does not
bump ostree's dependency on GLib.
Closes: #295
Approved by: cgwalters
Apparently I got the bracketing wrong in
862e6ecdcc58f025696b1394adfc0fcf7322df23:
src/libostree/ostree-repo.c: In function 'ostree_repo_delete_object':
src/libostree/ostree-repo.c:3538:11: warning: missing braces around
initializer [-Wmissing-braces]
g_auto(GVariantBuilder) builder = {0,};
Closes: #298
Approved by: cgwalters
When we added enum type generation, the generated symbols used
the `ostree_` prefix, and at the time that implied they were public.
So we started (if built with libsoup) exporting
`ostree_fetcher_config_flags_get_type`.
I think it's not worth confusing ABI checkers, so let's export the
dummy symbol forever, and switch enums to be private by default.
We should revisit this and also export some auto-generated enum
types for public enums, but that's a separate patch.
Closes: #296
Approved by: gatispaeglis
This tries to avoid leaking GVariantBuilders and GVariants in some
situations. The leaks were usually happening when some error occurred
or because of unclear variant ownership situation.
The former is mostly about making sure that g_variant_builder_clear is
called on builders that didn't finish their variant building process.
The latter is surely more work - sometimes the result of
g_variant_builder_end() should not be passed directly to a function,
but rather stored in a g_autoptr(GVariant), sunk and then passed to a
function. IMO, with an advent of g_autoptr, GVariants should be always
sunk instead of relying on some receiver function sinking it. This
would make an easy-to-follow policy of always sinking your
variants. Functions could then assume that the passed variant is
already sunk. These leaks are still happenning in commands, but they
are less harmful, since that code will not be used by some daemon as a
library routine.
Closes: #291
Approved by: cgwalters
This adds a _with_options variant of the
ostree_repo_remote_fetch_summary function, so we can tell the fetcher
to use a specific URL instead taking it from the remote config.
Closes: #290
Approved by: cgwalters
The base URI created in this line was always (sans erroneous
situations) overwritten in the code block below without freeing it
previously, so it leaked.
Closes: #290
Approved by: cgwalters
Use markdown to actually format the tuple member descriptions as a
list. Currently they are hardly legible as gtk-doc formats them into a
single sentence.
Also update the additional metadata docs in the summary objects.
Closes: #289
Approved by: cgwalters
It's very useful for third-party applications to have someplace to store
their data guaranteed to be on the same device as the repo (thus
ensuring hardlinks) while still being shielded away from any of OSTree's
timely garbage collections.
We create a new "extensions/" subdirectory where apps can include
whatever they wish in "extensions/myapp/". This subdirectory is
completely unmanaged by ostree.
NB: I didn't bother making it a member of the OstreeRepo proper since we
don't really use it for anything else yet.
Closes: #286
Approved by: cgwalters
The deployments and booted deployment were never unreffed.
Also, remote (void) from the call to the unload function - it returns
nothing, so there is no need to fool the compiler.
Closes: #287
Approved by: cgwalters
I was briefly looking at building with clang mostly since it
detects unused variables with cleanup attributes, but then
I hit this fatal error.
It's a hard compile error with `-Wformat-nonliteral` since clang
doesn't know it's a format string.
This was already supported by the commit modifier API, just needed to
expose it. This will also be used to test the libarchive API in a future
test.
Closes: #275
Approved by: cgwalters
- Make hardlink handling more generic. The previous strategy worked for
tar archives, but not for cpio. It now works for both.
- Add support for SEL labeling (through the OstreeRepoCommitModifier)
- Add support for xattr_callback (through the OstreeRepoCommitModifier)
- Add support for filter (through the OstreeRepoCommitModifier)
- Add a use_ostree_convention option
Closes: #275
Approved by: cgwalters
I ended up deciding to move this one into libglnx, seems like
something other libglnx-using software might want to do, even though
xdg-app doesn't right now.
Closes: #282
Approved by: jlebon
The filesystem commit code will never give us potentially hostile
filenames, and when importing from archives, we do some validation.
However, we should be extra paranoid and also add error messages in
the mtree in case someone tries to import a hostile
libarchive-supported format.
Closes: #283
Approved by: jlebon
We were arbitrarily only deleting content after exactly one day. Some
use cases may want something else; make it configurable.
Closes: #170
Approved by: jlebon
We had a policy of cleaning up all files in `$repo/tmp` older
than one day, but we should really clean up previous bootid staging
directories too, as they can potentially take up a lot of disk space.
https://bugzilla.gnome.org/show_bug.cgi?id=760531Closes: #170
Approved by: jlebon
Setting this causes commit to error out. There are other ways we
could do this in a more sophisticated fashion, such as via SystemTap
etc. But this has low-tech applicablity, works as non-root.
The reason I'm adding this is so that we can add test cases for
cleanup of the `tmp/staging-` directory.
Closes: #170
Approved by: jlebon
I have a cache drive I often mount read-only, and the previous commit
for opening `tmp/cache` broke since `errno == EROFS`, not `EPERM`.
It turns out we already had the concept of a "writable" repo, so just
piggy back off that.
Closes: #281
Approved by: giuseppe
To GLnxConsoleRef. There were some subtleties here, for example we
used to reference `GSConsole` inside the progress changed function,
which at first seems like an ABI hazard, because e.g. rpm-ostree or
xdg-app could still be passing a `GSConsole` instance there. Luckily,
it turns out to be compatible to just start calling libglnx here.
Another issue was that due to libglnx's use of the cleanup function,
we needed to ensure we always called `ostree_async_progress_finish()`
*before* the cleanup function was invoked.
Closes: #280
Approved by: giuseppe
Commit
1810de2b51
lost an optimization where we would try hardlinks for the
kernel/initramfs in `/boot`. This would be a noticeable space savings
on single-partition systems.
Closes: #277
Approved by: gatispaeglis
In the case we have a repo with a parent, and the child repo has a
remote called "foo", but some option is unset. Then when we look up
the parent repo for a value before using the default we will fail due
to the parent not having the "foo" remote. As soon as we find the
requested remote at some point in the hierarchy we need to ignore further
errors and use the default value.
Closes: #274
Approved by: giuseppe
We looked for and locked old temporary directories so we can
reuse them if not in use. However, once we found one that
we can reuse we didn't stop iterating, and eventually we
reached the end. This means we can lock multiple dirs.
Closes: #273
Approved by: giuseppe
There was some leftover intermediate cruft here I noticed
while reviewing another patch:
- We had an output `GFile*` for that was never used
- We required the caller to allocate the loose pathbuf, but
none of them ever reused it
- We had an extra intermediate function
Also while looking at this, I'm now uncertain whether some of the
callers of `_ostree_repo_has_loose_object` should really be invoking
`ostree_repo_has_object()`, but let's leave that aside for now.
Closes: #272
Approved by: alexlarsson
This lets you set a prefix for the resulting archive patsh.
Especially useful in combination with --subpath, for instance
--subpath=subdir --prefix=subdir to extract just subdir.
Closes: #265
Approved by: cgwalters
We keep forgetting to update `apidoc/ostree-sections.txt`, so let's
start enforcing it. Of course it turns out we had some bugs here
like symbols marked as public but never implemented, etc. Those
are fixed in the prior commits.
Closes: #263
Approved by: giuseppe
This was removed in 14d682305b - long
before we had a stable library.
I again claim removing unimplemented symbols from the header is not an
API/ABI break.
Closes: #263
Approved by: giuseppe
If a symbol falls in a git merkle tree forest, but no one hears it,
did it ever exist?
I'm claiming this isn't an API/ABI break because nothing could
have actually used this. `git log -S checksum_update_meta` leads
me to 38ef75e6e0 which was before
we really had a stable shared library.
Closes: #263
Approved by: giuseppe
This allows you to replace the default
$sysroot/$sysconfdir/ostree/repos.d string value, and to use a similar
feature for repos that are not the system repo.
In particular, this allows us to support /etc/xdg-app/remotes.d for
xdg-app.
Closes: #247
Approved by: cgwalters
in write_directory_content_to_mtree_internal dfd_iter can be NULL,
for instance if commiting from --tree=ref=FOO. Don't blindly de-ref
it to avoid crashing.
Closes: #256
Approved by: cgwalters
ostree pull-local crashed for me in thread_closure_unref () doing:
g_mutex_clear (&thread_closure->output_stream_set_lock);
Seems like we never initialize this mutex.
Closes: #254
Approved by: cgwalters
I think it's cleaner if we use `remote_repo_local` to know
that we have a local repo. In reality, it might be nicest
if we didn't even create an `OstreeFetcher` for this case,
but untangling the code is tricky.
Closes: #239
Approved by: alexlarsson
Otherwise we get undefined behaviour if the client didn't explicitly set
any flags.
Also, add documentation for all the other options supported by
ostree_repo_pull_with_options().
Closes: #252
Approved by: cgwalters
These are useful for ostree users (like xdg-app) that have custom
options for remotes. In particular they are useful when we later make them
all respect self->parent_repo.
Closes: #236
Approved by: cgwalters
Force the otherwise disabled gpg verifications on.
Note: You need to pass --remote=foo so we know what gpg keys to verify
against.
Closes: #237
Approved by: cgwalters
Not only does this not make sense from a performance perspective, but
it also doesn't work because we can't use a url as a path element.
Closes: #237
Approved by: cgwalters
ostree-grub-generator can be used to customize
the generated grub.cfg file. Compile time
decision ostree-grub-generator vs grub2-mkconfig
can be overwritten with the OSTREE_GRUB2_EXEC
envvar - useful for auto tests and OS installers.
Why this alternative approach:
1) The current approach is less flexible than using a
custom 'ostree-grub-generator' script. Each system can
adjust this script for its needs, instead of using the
hardcoded values from ostree-bootloader-grub2.c.
2) Too much overhead on embedded to generate grub.cfg
via /etc/grub.d/ configuration files. It is still
possible to do so, even with this patch applied.
No need to install grub2 package on a target device.
3) The grub2-mkconfig code path has other issues:
https://bugzilla.gnome.org/show_bug.cgi?id=761180
Task: https://bugzilla.gnome.org/show_bug.cgi?id=762220Closes: #228
Approved by: cgwalters
This is a follow up to #227 to allow ostree to open the editor also for
orphan commits when no subject or body is given on the cmdline.
Closes: #229
Approved by: cgwalters
The API supports this, and it's not hard for us to do in the command
line as well. One possible use case is separating "content
generation" in a separate server.
Related: https://github.com/ostreedev/ostree/pull/223Closes: #227
Approved by: jlebon
When I'm doing local development builds, it's quite common for me not
to want to accumulate history. There are also use cases for this on
build servers as well.
In particular, using this, one could write a build system that didn't
necessarily need to have access to (a copy of) the OSTree repository.
Instead, the build system would determine the last commit ID on the
branch, and pass that to a worker node, then sync the generated
content back.
The API supported generating custom commits that don't necessarily
reference the previous commit on the same branch, let's just expose
this in the command line for convenience.
I plan to also support this rpm-ostree.
Closes: #223
Approved by: jlebon
Now that OSTree is used as G_LOG_DOMAIN, set the main handler to match
so the appropriate messages are filtered. It would probably be more
appropriate to spell out "OSTree" in the code, but since G_LOG_DOMAIN is
being defined globally in the project, might as well reuse it here.
https://bugzilla.gnome.org/show_bug.cgi?id=764237Closes: #225
Approved by: cgwalters
If you have a repo where a needed object has been inadvertantly removed,
all you'll get is a "No such metadata object" error with no clue about
where it was referenced from.
Add some debug messages to provide clues about which objects are being
traversed and found.
https://bugzilla.gnome.org/show_bug.cgi?id=764006Closes: #224
Approved by: cgwalters
When prune fails, it can be really difficult to figure out why. This at
least lets you know which objects are being considered.
https://bugzilla.gnome.org/show_bug.cgi?id=764006Closes: #224
Approved by: cgwalters
This can be used as a fingerprint to determine whether two
OstreeSePolicy objects are equivalent.
Also add documentation for ostree_sepolicy_get_name().
Closes: #219
Approved by: cgwalters
The dirtree object is required for traversing, so don't use the
load_variant_if_exists() function. This will return a
G_IO_ERROR_NOT_FOUND to the caller rather than trying to ref a NULL
variant in ostree_repo_commit_traverse_iter_init_dirtree() if the object
is missing.
https://bugzilla.gnome.org/show_bug.cgi?id=764091
If a commit only pull has been done, then the commit object exists in
the object store in addition to the commitpartial file. Traversing this
partial commit will likely fail, but that's expected. If traverse
returns a G_IO_ERROR_NOT_FOUND in this case, continue with pruning.
https://bugzilla.gnome.org/show_bug.cgi?id=764091
I'm trying to improve the developer experience on OSTree-managed
systems, and I had an epiphany the other day - there's no reason we
have to be absolutely against mutating the current rootfs live. The
key should be making it easy to rollback/reset to a known good state.
I see this command as useful for two related but distinct workflows:
- `ostree admin unlock` will assume you're doing "development". The
semantics hare are that we mount an overlayfs on `/usr`, but the
overlay data is in `/var/tmp`, and is thus discarded on reboot.
- `ostree admin unlock --hotfix` first clones your current deployment,
then creates an overlayfs over `/usr` persistent
to this deployment. Persistent in that now the initramfs switchroot
tool knows how to mount it as well. In this model, if you want
to discard the hotfix, at the moment you roll back/reboot into
the clone.
Note originally, I tried using `rofiles-fuse` over `/usr` for this,
but then everything immediately explodes because the default (at least
CentOS 7) SELinux policy denies tons of things (including `sshd_t`
access to `fusefs_t`). Sigh.
So the switch to `overlayfs` came after experimentation. It still
seems to have some issues...specifically `unix_chkpwd` is broken,
possibly because it's setuid? Basically I can't ssh in anymore.
But I *can* `rpm -Uvh strace.rpm` which is handy.
NOTE: I haven't tested the hotfix path fully yet, specifically
the initramfs bits.
In some cases (such as `ostree-sysroot-cleanup.c`), the surrounding
code would be substantially cleaner if it was also ported to
fd-relative, but I'm going to do that in a separate patch.
That way these patches are easier to review for mechanical
correctness. I used an Emacs keyboard macro as the poor man's
[Coccinelle](http://coccinelle.lip6.fr/).
⚠️ There is a notable spiked pit trap here around
`posix_fallocate()` and `errno`. This has bit other projects,
see e.g.
7bb87460e6
Otherwise the port was straightforward.
Since we hard-depend on GLib 2.40, we can start using GSubprocess.
This is part of dropping our dependency on libgsystem, which is
deprecated in favor of libglnx (as well as migrating things to GLib).
I'd like to encourage people to make OSTree-managed systems more
strictly read-only in multiple places. Ideally everywhere is
read-only normally besides `/var/`, `/tmp/`, and `/run`.
`/boot` is a good example of something to make readonly. Particularly
now that there's work on the `admin unlock` verb, we need to protect
the system better against things like `rpm -Uvh kernel.rpm` because
the RPM-packaged kernel won't understand how to do OSTree right.
In order to make this work of course, we *do* need to remount `/boot`
as writable when we're doing an upgrade that changes the kernel
configuration. So the strategy is to detect whether it's read-only,
and if so, temporarily mount read-write, then remount read-only when
the upgrade is done.
We can generalize this in the future to also do `/etc` (and possibly
`/sysroot/ostree/` although that gets tricky).
One detail: In order to detect "is this path a mountpoint" is
nontrivial - I looked at copying the systemd code, but the right place
is to use `libmount` anyways.
It used to be allowed to run something like "ostree remote refs" on
a read-only (e.g. system) repo. However, the summary cache caused that to
break. This commit just makes it not save the cache if we get some kind
of permission error when writing it. It'll still work, even without the
cache.
https://bugzilla.gnome.org/show_bug.cgi?id=763855
It allows an optimization to skip the download of the summary file
if its .sig file is unchanged.
Downloading the .sig file is much cheaper than downloading the summary
file from repositories with many branches.
https://bugzilla.gnome.org/show_bug.cgi?id=762973
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This will allow daemons like rpm-ostree to detect if there are any new
deployments efficiently, in combination with using inotify. If there
are any changes, rpm-ostree wants publish them on DBus.
While we're here, add some changes to start doing unit C testing of
the sysroot API.
And change the command line to use it. rpm-ostree had a copy
of this code, and thus there's a clear reason to have an API.
While we're moving this into API, ensure the mtime on deploy is bumped
after an osname is created, so that daemons like rpm-ostree can notice
changes. (In reality, creating the directory should do this, but
let's be double sure)
This allows other processes (e.g. rpm-ostreed) to monitor for external
changes (e.g. if someone does `ostree admin undeploy`) in a relatively
sane fashion.
Specifically, I'm trying to fix:
https://github.com/projectatomic/rpm-ostree/issues/220
It accepts a `flags` argument to control its behavior. Differently
from `ostree_repo_list_refs`, the `refspec_prefix` is not removed from
the results.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
I plan to use this in rpm-ostree at least for two reasons:
- To find the mtime on the repo
- To use the tmp/ directory to stage content (but we should eventually
add a better API)
As rpm-ostree evolves, it keeps driving API additions to libostree.
This creates a relatively tight coupling.
However, if delivering via e.g. RPM, unless one manually remembers to
increment the `Requires:` in the spec file, it's possible for the two
to become desynchronized.
RPM handles versioned symbols and will ensure a dependency if the
application starts using a newer version.
To implement this, switch to `-fvisibility=hidden`, along with an
annotation in the header, and finally add a `.sym` file.
This matches what other projects like systemd and libvirt do.
Although rather than attempting to retroactively version symbols, glom
them all onto the current one.
I see when analyzing a delta here that due to byteswapping a negative
compression ratio of 540%, 66%, and 28%. Let's arbitrarily pick 20%
as a threshold for detecting byetswapping.
If the average object size is greater than 4GiB, let's assume we're
dealing with opposite endianness. I'm fairly confident no one is
going to be shipping peta- or exa- byte size ostree deltas, period.
Past the gigabyte scale you really want bittorrent or something.
xdg-app passed this a filename directly, and in this case it should be
used as is. This regressed to always look for "superblock" in the same
directory as the passed in filename.
https://bugzilla.gnome.org/show_bug.cgi?id=762617
Some Docker layers are just metadata in the `layer.json`. If one is
mapping Docker layers to OSTree commits, one needs to create a dummy
root directory, because OSTree doesn't support metadata-only commits.
Let's just push that logic down here because it's easier than special
casing it in higher levels.
One of the design goals with deltas was not just wire efficiency,
but also having all the data up front about how much data would
be transferred before starting.
Let's expose that better by adding a `dry-run` option to the pull API.
This requires static deltas to be useful. Basically we simply call
the progress callback once with the data from the superblock.
For a production release repository, most OS vendors would want
to just always use static deltas. Add the ability for the pulls to
require it.
(I think I'll also add a summary key for this actually in addition,
so the repo manager can force it too)
If ostree is run in a test setup where it operates as root in a tmp
directory, it might cause issues to flag the deployments as immutable.
The test harness might simply be doing an `rm -rf` (effectively the case
for gnome-desktop-testing-runner), which will then fail.
We add a new debug option to the ostree_sysroot object using GLib's
GDebugKey functionality to allow our tests to communicate to ostree that
we don't want immutable deployments.
This is a more flexible version of the previous
ostree_repo_write_archive_to_mtree() which took a file reference.
This has an extensible options structure, and in particular
now supports `ignore_unsupported_content`.
I plan to use this for importing Docker images which contain device
nodes. (There's no reason for container images to have those, so
we'll just ignore them).
Also here, just like the export variant, the caller is responsible for
setting up libarchive.
I was going to add new API for importing, and it was really confusing
that what I think of now as import and export both had "write" in the
name. It's just clearer to talk about the direction.
At the same time, include `Export` in the options structure.
This isn't an ABI break as the API isn't in a release.
I was getting a compilation error with the GCC hardening flags which
look for a missing mode with `O_CREAT`. The right fix here is to drop
`O_CREAT`, as truncate() should throw `ENOENT` if the file doesn't
exist.
I don't know why we didn't do this a long time ago. This extends the
pull API to allow grabbing a specific commit, and will set the branch
to it. There's some support for this in the deploy engine, but there
are a lot of reasons to support it for raw pulls (such as subset
mirroring cases).
In fact I'm thinking we should also have the override-version logic
here too.
NOTE: One thing I debated here is inventing a new syntax on the
command line. Git doesn't seem to have this functionality (probably
because it'd be rarely used). The '@' character at least doesn't
conflict with anything.
Anyways, I wanted this for some other test cases. Without this,
writing tests that go between different commits is more awkward as one
must generate the content in one repo, then pull downstream, then
generate more content, then pull again. But now I can just keep track
of commit IDs and do exactly what I want without synchronizing the
tests.
At the moment I'm looking at using rpm-ostree to manage RPM inputs
which can then be converted into Docker images. It's most convenient
if we can stream directly out of libostree rather than doing a
checkout + tar combination.
There are also backup/debugging etc. reasons to implement `export` as
well.
While it's not strictly tied to OSTree, let's move
https://github.com/cgwalters/rofiles-fuse in here because:
- It's *very* useful in concert with OSTree
- It's tiny
- We can reuse OSTree's test, documentation, etc. infrastructure
One thing to consider also is that at some point we could experiment
with writing a FUSE filesystem for OSTree. This could internalize a
better equivalent of `--link-checkout-speedup`, but on the other hand,
the cost of walking filesystem trees for these types of operations is
really quite small.
But if we did decide to do more FUSE things in OSTree, this is a step
towards that too.
Now we display stats on the individual parts, such as the blob size
and the number of each type of opcode. Most interesting to me is
things like how many bsdiff opcodes there are vs new objects, etc.
We had code to deal with opening/checksumming/decompressing static
deltas in a few places. I'd like to teach `ostree static-delta show`
how to display more information, and this will allow it to just use
`_ostree_static_delta_part_open()` too.
Right now though, almost all of the details of deltas are private, so
we can't do the "honest thing" and have the command line just use the
shared library.
Eventually some of this should appear in the API, but for now add
command line which is useful for debugging.
I'd like to incrementally convert all of `ostree-repo*.c` to
fd-relative usage, so that we can sanely introduce
`ostree_repo_new_at()` which doesn't involve GFile.
This one is medium risk, but passes the test suite.
The original intention here was that we'd keey around a copy of the
file so that grub2 could eventually learn how to do atomic updates by
checking for a "fully written" marker in the *new* file, and if it
didn't exist, falling back to grub2.cfg.old.
I haven't yet proposed that upstream, but we might as well stop
deleting the file since it's useful as a backup at least.
Reported-by: Gatis Paeglis
This is a better followup to dc9239dd7b
since I wanted to do fsync-less checkouts in rpm-ostree too, and
replicating the "turn off fsync temporarily" was in retrospect just a
hack.
We can simply add a boolean to the checkout options.
https://github.com/GNOME/ostree/pull/172
Originally, a lot of the `fsync()` calls here were added for the
wrong reason - I was chasing a bug that ended up being the extlinux
bootloader not parsing 64 bit ext4 filesystems. But since it looked
like corruption, I tried adding a lot more `fsync()` calls.
All we should have to do is use `syncfs()`. If that doesn't work,
it's a kernel bug.
I'm making this change because skipping the individual fsyncs can be a
major performance win - it's easier for the FS to optimize, we do more
in parallel, etc.
https://bugzilla.gnome.org/show_bug.cgi?id=757117
A fast way to generate new OSTree content using an existing
tree is to checkout (as hard links), add/replace files, then
call `ostree_repo_scan_hardlinks()`, then commit.
But `ostree_repo_scan_hardlinks()` scans the entire repo, which
can be slow if you have a lot of content.
All we really need is a mapping of (device,inode) -> checksum
just for the objects we checked out, then use that mapping
for commits.
This patch adds API so that callers can create a mapping via
`ostree_repo_devino_cache_new()`, then pass it to
`ostree_repo_checkout_tree_at()` which will populate it, and then
`ostree_repo_write_directory_to_mtree()` can consume it.
I plan to use this in rpm-ostree for package layering work.
Notes:
- The old `ostree_repo_scan_hardlinks()` API still works.
- I tweaked the cache to be a set with the checksum colocated with
the key, to avoid a separate malloc block per entry.
https://github.com/GNOME/ostree/pull/167
The logic for checking which bootversion to use tries to access
sysroot->bootversion if the user didn't specify an explicit bootversion
on the command-line nor through the env var. However, at that point, the
sysroot object is not yet initialized, so it will always return 0, even
when it's 1.
This would cause e.g. `grub2-mkconfig` to have no output for the BLS
entries whenever the entries were under `/boot/loader.1`.
Related: RHBZ1293986
The tmp directory is lazily created for each fetcher instance, since
it may require superuser permissions and some instances only need
_ostree_fetcher_request_uri_to_membuf() which keeps everything in
memory buffers.
This is a continuation of earlier work to drop the individual fsync on
files/directories in favor of relying on `syncfs()` for speed.
As part of that cleanup, I'm porting it to be fd-relative.
I feel relatively confident about this change given that this area of
the code has notable test suite coverage, although that code runs as
non-root.
I'm porting the deployment code to be fd-relative, but part of the
logic was using `GFile` to talk to `OstreeRepoFile` to determine the
"bootcsum" (boot config checksum) before checking out the file tree.
We can avoid having both code paths by checking out the tree first,
then looking at it on the filesystem.
Extract existing code from ostree_repo_prune and add an argument COMMIT,
that controls which commit purge. If not set, the old behavior is kept.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Downloads and prints a remote summary file and any signatures in an
easy-to-read format, or alternatively with the --raw option, prints
the summary GVariant data directly.
https://bugzilla.gnome.org/show_bug.cgi?id=759250
Given the previous commit, which isolates SoupSession in a separate
thread, it should be safe to start pushing a temporary main context
for synchronous requests again.
This partially reverts 84fe2ff, which partially reverted 9f3d586.
Related to https://bugzilla.gnome.org/show_bug.cgi?id=753336
Move the SoupSession to a separate thread with its own isolated main
context and main loop. All interaction with the SoupSession occurs
by way of idle sources attached to the session's main context, which
execute on the session's thread.
This should solve the problem of running an asynchronous fetch request
synchronously by pushing a new thread-default main context and iterating
a main loop until the request completes. Prior to this, the new thread-
default main context would interfere with the SoupSession's own async
processing.
A lot of effort here just to avoid touching SoupSession directly in
ostree_fetcher_new(). The reason will become apparent in subsequent
commits.
Note this introduces generated enum/flags GTypes using glib-mkenums.
I could have just made the property type as plain integer, but doing
properties right will henceforth be easier now that the automake-fu
is established.
This way two pulls will not use the same tmpdir and accidentally
overwrite each other. However, consecutive OstreeFetchers will reuse
the tmpdirs, so that we can properly resume downloading large objects.
https://bugzilla.gnome.org/show_bug.cgi?id=757611
Concurrent pulls break since we're sharing the staging directory for
all transactions in the repo. This makes us use a per-transaction directory.
However, in order for resumes to work we first look for existing
staging directories and try to aquire an exclusive lock for them. If
we can't find any staging directory or they are all already locked,
then we create a new one.
https://bugzilla.gnome.org/show_bug.cgi?id=757611
This creates a subdirectory of the tmp dir with a selected prefix,
and takes a lockfile to ensure that nobody else is using the same directory.
However, if a directory with the same prefix already exists and is
not locked that is used instead.
The later is useful if you want to support some kind of resumed operation
on the tmpdir.
touch reused dirs
https://bugzilla.gnome.org/show_bug.cgi?id=757611
Bison is a well known external dependency, so just require it.
Including the generated content in git means it may or may not
be regenerated based randomly on timestamps, etc.
Also use `$(AM_V_GEN)` so we get prettier output.
Previously we were just ignoring this, which hid a bug in
an earlier commit that generated them.
Also change the `commit` program to use both APIs - this
involves extra code, but not too much.
This way, reverting the fix with this on top caused the test suite to
fail. Adding an active test for this would need a custom test program
using the C API, or adding a cmdline flag to the client, neither of
which quite seemed worth it.
Use the parse-datetime module from gnulib, and adapt it to not require
other modules as portability is not really an issue for us.
DATE can be specified in different formats, such as: "-1 week", "last
monday", "1 week ago".
Include the generated .c file in the repository so to not add another
dependency to Bison.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
ostree_repo_write_commit_with_time() converts the timestamp to
big-endian byte order.
ostree_repo_write_commit() was also doing this when calling
ostree_repo_write_commit_with_time(), resulting in a corrupted
commit object (timestamp bytes were backwards).
Recent regression in 14ffd7022a
Just to make copy-and-paste a little easier, as I often use this command
immediately before rebasing.
e.g.
# ostree remote refs fedora-atomic
fedora-atomic:fedora-atomic/f23/x86_64/docker-host
fedora-atomic:fedora-atomic/f23/x86_64/testing/docker-host
^^^^^^^^^^^^^^ (this part is new)
# rpm-ostree rebase fedora-atomic:fedora-atomic/f23/x86_64/testing/docker-host
Do not delete a .commitmeta file after removing the last metadata entry.
This way a client will pull the empty .commitmeta file and overwrite old
metadata as expected.
https://bugzilla.gnome.org/750459
ostree_checksum_bytes_peek() can return NULL if the checksum has an
incorrect length (most likely from disk corruption) but most callers
are not prepared to handle this and would likely crash.
Use ostree_checksum_bytes_peek_validate() instead, which sets a
GError on an invalid checksum.
It may have a different meaning, and the usage screen is not helpful.
Print the usage screen only when the command is not found.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is very useful for the inline-parts case, as you can then include
detached signatures in a single file representing the commit.
It is not as important for the generic pull case, as the detached
metadata is only a single small file. Additionally the detached
metadata is not content referenced and may change after the static
delta file was created, so we need to pull the latest version anyway.
If you pass a diriectory it will look for the "superblock" child, otherwise
it will use the file as the superblock. I need this in xdg-app to be able
to install any filename as a bundle.
Also renames OstreeRepoTrustedContentBareCommit to
OstreeRepoContentBareCommit so that it can be used by both.
This will be needed when we introduce checksum verification of objects
in static deltas.
In this mode the parts are stored in the metadata of the main delta
superblock file. This can be useful if you want a single-file delta
for easy transport, or for http in the case the delta is very small.
When a commit is deleted and the repo is configured to use tombstone
commits, create one. Delete the tombstone file only if the commit is
pulled again.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add a new object type: OSTREE_OBJECT_TYPE_TOMBSTONE_COMMIT that is
used when a commit was intentionally removed.
If the remote repository doesn't use tombstone commits, do not fail on
a missing commit (change 0b795785dd).
When the remote repository uses tombstones, if a commit cannot be
found, check if the tombstone file is present and fail if it is not
present.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There might be a race here in that we create new symlink files *after*
calling `syncfs`, and they are not guaranteed to end up on disk.
Rework the code so that we create symlinks before, and then only
rename them after (and `fsync()` the directory for good measure).
Additional-fixes-by: Giuseppe Scrivano <gscrivan@redhat.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
This still needs verification that we're fixing a real bug; but I'm
fairly confident this won't make the fsync situation worse.
https://bugzilla.gnome.org/show_bug.cgi?id=755595
Adds an entry to the origin file to force the OstreeSysrootUpgrader to
pull and deploy the given checksum.
[origin]
override-commit=CHECKSUM
If the option is not given, any such entry is explicitly removed from
the origin file to ensure we upgrade to the latest available commit.
Upgrader now looks for an "override-commit" key in the origin file
with a commit checksum, which causes the upgrader to pull and deploy
the specified commit rather than the latest available commit on the
origin refspec.
The current code checks if /boot/uEnv.txt is a symlink to
decice if sysroot requires u-boot support. Why this is bad:
There are 2 ways to provide a custom env to u-boot from user space:
1) A compiled binary that is sourced from u-boot.
2) A text file (usually /uEnv.txt) that is imported into env from u-boot.
The current OSTree u-boot integration code was designed with the 1st
case in mind.
Many bootscripts provided by an embedded device vendors expect
to find uEnv.txt in the top level directory, it is often hardcoded
when building u-boot and is difficult to change later on. Or in other
cases it is stored in read-only memory so changing it would require
re-flushing boot loader with a new env. So the issue here is that
OSTree's and vendor uEnv.txt want to exist and the same path and OSTree
would throw away any changes added to /uEnv.txt by user on the next
upgrade/deploy.
This patch "hides" away the OSTree's env file loader/uEnv.txt from users
who are used to edditing uEnv.txt at the top level directory. Now to add
OSTree support on such boards you can simply add a custom logic in uEnv.txt
that loads ostree env from /loader/uEnv.txt
This change is backward compatible with the previous ostree releases and
solves the issue described in:
https://bugzilla.gnome.org/show_bug.cgi?id=755787
Using `commit_subject` instead of `arg` is clearer as it can refer to
a directory, archive or ref.
This is just an aesthetic change in the source code, having no impact
anywhere else.
There is already a check that the destination object does not
exist in all other cases when processing an incoming static delta.
However, the bspatch case would still try to run and fail. Add
an analogous check to that case as well.
https://bugzilla.gnome.org/show_bug.cgi?id=756260
zlib can return LZMA_BUF_ERROR, which indicates that either
the input or output buffer has size zero. This case should cause
the correct error to be passed back from g_converter_convert
to expand the relevant buffer. Since this error is ambiguous
as to which buffer is too small, an explicit check on the
output buffer size is added as well.
https://bugzilla.gnome.org/show_bug.cgi?id=756260
I was working on a different test, and ended up being very confused at
the behavior where removing the last deployment didn't remove the last
`ostree/X/X/X` ref pointing to its commit.
There's no reason to special case the last undeployment AFAIK, and the
existing code handles this.
Track outstanding HTTP requests in a table for easier debugging.
Also fixes a bug discussed in https://bugzilla.gnome.org/755224
where the outstanding request counter was not decremented in the
event of an error, which could result in the fetcher hitting its
max request limit and locking up.
The bug is fixed by removing the request struct from the table in
pending_uri_free(), which is always called regardless of error,
so the outstanding request count is always accurate.
Have OstreeFetcherPendingURI be the GTask's task_data and pass the GTask
around in queues and callback closures. The reference counting before
was a little confusing and this helps clarify it, at least to me.
OstreeFetcherPendingURI no longer needs its own reference count.
Had a rare situation where I had no libsoup development files, so I
took the opportunity to fix the build errors. Ugly, but works now.
Would be nice if libsoup could be a hard dependency since we rarely
ever test a configuration without it.
To support deploying older commits:
ostree pull <remote> <checksum>
ostree admin deploy <checksum>
Prior to this, the deploy command garbage collected <checksum> since
there's no ref pointing to it, and then ostree_sysroot_deploy_tree()
fails because it can't find the <checksum> commit.
https://bugzilla.gnome.org/732526
New public function works like ostree_sysroot_cleanup() EXCEPT FOR
pruning the repository.
Under the hood, add _ostree_sysroot_piecemeal_cleanup() which takes
flags to better control what files are cleaned up. Both public cleanup
functions are now wrappers for _ostree_sysroot_piecemeal_cleanup() with
different flags.
xdg-app was hanging for me with v2015.8, but worked with v2015.7.
I narrowed things down to the GMainLoop/context commit, in which
we started pushing a temporary main context for synchronous
requests internally.
That's never really going to work with libsoup - there needs
to be a single main context which works on the socket. Furthermore,
clients couldn't get progress messages that way.
For *other* internal uses where we added APIs that talk to the remote
repo, we cleanly push a temporary main context.
(Note that I kind of snuck in a change here around the GError handling
in pulls that isn't strictly related but came up in testing)
I noticed xdg-app was looping trying to fetch 1427 refs. We
don't want to do that unless asked to.
(And also, we need to make static delta requests async)
There's no reason to keep them hidden. I have a hard policy that
OSTree should *not* be used to carry secrets. Things like host ssh
private keys should be set up out of band by an OS-external
configuration mechanism such as kickstart, cloud-init, etc.
We also assume that hiding binaries is not very useful as most
attackers would be able to find them on the Internet or (for
subscribed content) acting as a customer.
This fixes a bug with mirroring because we changed to take the
unmodified upstream objects rather than uncompress <-> recompress.
https://bugzilla.gnome.org/show_bug.cgi?id=748959
Now that the computed similar objects are all regular files,
get_unpacked_unlinked_content should never be called on any other
object type. Assert that this is true instead of silently succeeding.
_ostree_delta_compute_similar_objects should not output symlinks.
Previously, a symlink in the "from" commit could be matched to a
real file in the "to" commit, since nothing was filtering symlinks
on the "from" side. This led to failures running the bzdiff
algorithm.
On systems with slow disks, the recursive scanning of directories can
be expensive -- it takes upwards of 2 minutes on our systems. This can
block the main loop for such a long time that it allows the download to
time out...
As such, move all the scanning of objects to a queue, processed from
an idle, to make sure that we don't block the main loop when scanning.
https://bugzilla.gnome.org/show_bug.cgi?id=753336
First of all, what we were doing with having GMainLoop in the internal
APIs is wrong. Synchronous APIs should always create their own main
context and not iterate the caller's. Doing the latter creates
potential for evil reentrancy issues. Sync API should block, async
API is for not blocking.
Now that's out of the way, fix the pull code to do the clean
```
while (termination_condition (state))
g_main_context_iteration (mainctx, TRUE);
```
model for looping. This is a lot easier to understand and ultimately
more reliable than having other code call `g_main_loop_quit()`, as the
loop condition is in exactly one place.
We can also remove the idle source which only fired once.
Note we have to add a hack here to discard the synchronous session and
create a new one which we only use async.
https://bugzilla.gnome.org/show_bug.cgi?id=753336
ostree_repo_prepare_transaction() should always be matched with a call
to either ostree_repo_commit_transaction() or
ostree_repo_abort_transaction().
Since ostree_repo_pull_with_options() does not call
ostree_repo_abort_transaction() on errors, the OstreeRepo instance will
hit an assertion when it's re-used later for another attempt, such as
when the update is driven by an external component through libostree and
network temporarily goes down.
This commit simply always calls ostree_repo_abort_transaction() in the
exit path of ostree_repo_pull_with_options(), since the function is safe
to call even when we're not in a transaction, and that matches e.g. what
ostree-sysroot-cleanup.c does.
The new API permits to query a remote repository summary file and
retrieve the list of available refs.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Returns a GFile for the default system root, which is usually the root
directory unless overridden by the OSTREE_SYSROOT environment variable
(which is mainly intended for testing).
libsoup will cache sessions, so it might be the case that we get a
reused session when pulling from the same repo multiple times in one
process.
In this case we were leaking signal connections, which caused
callbacks into freed memory with bad consequences.
Fix it by tying the signal connection to the object lifetime.
I did a quick audit pass through the pull code. What I focused on the
most is the case where `gpg-verify-summary=true`, and in particular
where `gpg-verify=false` too. This should be a valid and secure
configuration.
The primary change here is to error out very quickly if either
`summary` or `summary.sig` are 404. Previously, we'd only error out
if we were processing deltas.
Expand the existing test case to cover this, plus invalid summary and
invalid sig. (The test case was failing with current git master too).
It allows to specify whether GPG verification for the summary file is
enabled for a specific repository.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Works like "ostree refs" but fetches refs from a remote repo.
This depends on the remote repo having a summary file, but any repo
being served over HTTP *ought* to have one.
This may not be the best idea for general usage, but the only use case
for metalinks currently is fetching a summary file and those are pretty
small. Far more convenient to return the file content in a GBytes.
The state machine's "passthrough_previous" field never got set, so the
machine gets put back into the wrong state after a passthrough phase.
Couple other minor issues around error handling.
The global keyring directory (trusted.gpg.d) is deprecated. Only use it
when a specified remote does NOT have its own keyring, or when verifying
local repository objects.
Note, because mixing in the global keyring directory is now an explicit
choice, OstreeGpgVerifier no longer needs to implement GInitableIface.
We need to check that it's 'ay'. Also reuse the existing validation
function to check it's 32 bytes rather than potentially crashing with
assertion.
Just noticed this during a code review.
If there are multiple signatures to verify, we would attempt to
display them multiple times, but we can only call
`gs_console_end_status_line()` if the console has been enabled.
Ensure we turn back on the console after printing our status. This
will result in extra newlines, but fixing that cleanly would require a
saner GSConsole API.
I haven't done a full dig through the history, but it seems quite
possible right now we've been relying on inode enumeration
order for generating bootloader configuration.
Most of the time, newer inodes (i.e. later written files) will win.
But that's obviously not reliable.
Fix this by sorting the returned configuration internally.
When I was introducing the `_UNLOCKED` flag, I only audited
subcommands of `ostree admin`, but I missed that `ostree admin
instutil` also used the option parsing. Those are only used by
Anaconda today so we can ignore them for locking purposes.
Also, the usage help generation was grabbing the lock unnecessarily.
If a remote keyring does not already exist, create an empty pubring.gpg
file in the temporary directory prior to importing keys. This prevents
gpg2 from creating a pubring.kbx file in the new keybox format [1]. We
want to stay with the older keyring format since its performances issues
are not relevant here.
[1] https://gnupg.org/faq/whats-new-in-2.1.html#keybox
External daemons like rpm-ostree want push notification any time a
change is made by an external entity. inotify provides notification,
but a problem is there's no easy way to monitor all of the refs.
In the past, there has been discussion of opt-in recursive timestamps:
https://lkml.org/lkml/2013/4/5/307
But in today's world, let's just bump the mtime on the repo itself, as
a central inotify point.
Closes: https://github.com/GNOME/ostree/pull/111
The previous commit introduced locking for `ostree admin deploy`, but
we do expect people to possibly accidentally do e.g.
`ostree admin upgrade` concurrently.
Using consistent locking in the admin commands will help rpm-ostree.
Closes: https://github.com/GNOME/ostree/pull/110
Imports one or more GPG keys from a source stream or from the user's
personal keyring into a remote-specific keyring. The keys to import
can optionally be restricted by a list of key IDs.
The imported keys are used to conduct GPG verification when pulling
from the given remote.
The blocking locking API wasn't sufficient for use in the rpm-ostree
daemon; it really wants to know if the lock is held, then continue to
do other things (like service DBus requests), and get notification
when the lock is available.
We also add an async variant that can be called if the lock is not
available.
Implement a higher level "loop until lock is available" method in the
`ostree admin` commandline.
Krzesimir Nowak
Yu Qi Zhang
Colin Walters
Alexander Larsson
Mathnerd314
Jonathan Lebon
Sam Spilsbury
Gatis Paeglis
Gatis Paeglis
Giuseppe Scrivano
Dan Nicholson
Stef Walter
Matthew Barnes
John Hiesey
Daniel Drake
Leandro Santiago
Jasper St. Pierre
Cosimo Cecchi
Colin Walters
Jeff Ortel