Update libglnx, which is mostly port the repo stagedir code
to the new tmpdir API. This turned out to require some
libglnx changes to support de-allocating the tmpdir ref while
still maintaining the on-disk dir.
Update submodule: libglnx
Closes: #1172
Approved by: jlebon
Doing this in prep for libglnx tmpdir porting, but I think we should also do
this because the partial fetch code IMO was never fully baked; among other
things it was never integrated into the scheme we came up with for "boot id
sync" that we use for complete/staged objects.
There's a lot of complexity here that while we have some coverage for, I think
we need to refocus on the core functionality. The libcurl backend doesn't have
an equivalent to this today.
In particular for small objects, this is simply overly complex. The downside is
clearly for large objects like FAH's 61MB initramfs; not being able to resume
fetches of those is unfortunate.
In practice though, I think most people should be using deltas, and we need to
make sure deltas work for large objects anyways.
Further ultimately the peer-to-peer work should help a lot for people
with truly unreliable connections.
Closes: #1176
Approved by: jlebon
If the new configuration passed to ostree_write_config () tries to
update options for a remote defined in a separate config file, return an
error. Without this, the full configuration would contain duplicate
remote specifications, which would raise an error the next time the repo
is opened.
Closes: #1159
Approved by: cgwalters
This option allows a repo to explicitly opt out of adding new remotes in
a remotes configuration directory. This currently defaults to true for
system repos and false for non-system repos to maintain legacy behavior
that non-system repos don't add remotes in a configuration directory.
That would be problematic for flatpak, which specifies a remotes config
dir but adds remotes in ways that are incompatible with it.
So, what this really does is allow system repos to control whether they
want to add remotes in the config dir or not. That's important if your
flatpak repo is the system repo like at Endless.
Closes: #1134Closes: #1155
Approved by: cgwalters
Before commit e0346c1, a non-system repo could specify
remotes-config-dir and have remotes read from there. However, adding
remotes would only be done in the config dir for a system repo. Restore
that by respecting remotes-config-dir when no sysroot is found and
adding back the ostree_repo_is_system() check when adding remotes.
Closes: #1133Closes: #1151
Approved by: cgwalters
There were some important ones there like a random `syncfs()`. The remaining
users are mostly blocked on the "fstatat enoent" case, I'll wait to port those.
Closes: #1150
Approved by: jlebon
Add keys from the signing homedir to the GpgVerifier used to look
for duplicate signatures. This will allow signatures from subkeys
to be canonicalised and recognised as already signed despite the
differing key ID, avoiding duplicate signatures.
Closes: https://github.com/ostreedev/ostree/issues/608Closes: #1092
Approved by: cgwalters
We have `ot_ensure_unlinked_at()` for the "ignore ENOENT" case, and
`glnx_unlinkat()` otherwise. Port all in-tree callers to one or the other as
appropriate.
Just noticed an unprefixed error in the refs case and decided to do a tree-wide
check.
Closes: #1142
Approved by: jlebon
I'd mostly been skipping the GPG functions due to lack of autoptr for a few
things, but I noticed these bits were straightforward.
Closes: #1136
Approved by: jlebon
The vast majority of invocations of `ot_gpgme_error_to_gio_error()` were paired
with `g_prefix_error()`; let's combine them for the same reason we do
`glnx_throw_errno_prefix()`. For the few cases that don't we might as well add
some prefix.
I also changed it to `return FALSE` in prep for more style porting.
Closes: #1135
Approved by: jlebon
However, they weren't showing up in the output HTML and I have
no idea why; I looked at what we're doing and it looks close enough
to what's going on in `GDBusConnection` that I was using as a reference.
I'm not going to spend a lot of time to debug it right now.
Closes: #1140
Approved by: jlebon
When working with collections it can be useful to see remote refs rather
than just local and mirrored ones. This commit changes the "ostree refs
-c" output to include remote refs, and includes remote refs with
collection IDs in summary file generation as well. The former behavior
is consistent with how "ostree refs" works, and the latter behavior is
useful in facilitating P2P updates even when mirrors haven't been
configured.
To accomplish this, OstreeRepoListRefsExtFlags was extended with an
EXCLUDE_REMOTES flag. This was done rather than an INCLUDE_REMOTES flag
so that existing calls to ostree_repo_list_refs_ext continue to have the
same behavior. This flag was added to ostree_repo_list_collection_refs
(which is an experimental API break).
Also, add unit tests for the "refs -c" and summary file behavior, and
update relevant tests.
Closes: #1069
Approved by: cgwalters
Things like https://sourceware.org/libabigail/manual/abidiff.html
look interesting but in a brief look I couldn't work out
how to conveniently use them for quick ABI sanity checking without
doing a diff from a previous build (which we could do but would be
more involved).
This way will at least catch struct ABI breaks on x86_64 which
I think we'd be most likely to do accidentally when trying
to use one of the previous unused values.
I found the hole values via gdb's `pahole` command.
Closes: #1108
Approved by: jlebon
This essentially completes our fd-relative conversion.
While here, I cleaned up the semantics of `ostree_repo_create()` and
`ostree_repo_create_at()` to be more atomic - basically various scripts were
testing for the `objects` subdirectory, so let's formalize that.
Closes: #820
Approved by: jlebon
Add a new error domain for GPG signing/verification errors, and use it
throughout libostree for describing verification errors. This replaces
various uses of G_IO_ERROR_FAILED, and one instance of
G_IO_ERROR_NOT_FOUND (for which some code in ot-builtin-show.c had to be
changed to ensure it was still handled correctly).
The use of a separate error domain allows failures in GPG operations to
be handled separately from network failures (where the summary file
could not be found to be downloaded, for example) or timeouts.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1064Closes: #1071
Approved by: mbarnes
Part of cleaning up our usage of libglnx; we want to use what's in GLib where we
can.
Had to change a few .c files to `#include ostree.h` early on to pick up
autoptrs for the core types.
Closes: #1040
Approved by: jlebon
Prep for dropping `GLNX_DEFINE_CLEANUP_FUNCTION` from libglnx
in favor of using GLib's `G_DEFINE_AUTO_CLEANUP_FREE_FUNC()`.
Closes: #1042
Approved by: jlebon
Mostly for the latest `-Wmaybe-uninitialized` fix, but while here also port some
places to newer APIs.
Update submodule: libglnx
Closes: #1027
Approved by: jlebon
Using the error prefixing in the delta processing allows us to
do new code style. Also strip trailing whitespace.
Use error prefixing in a few other random places. I didn't
hunt for all of them, just testing out the new API.
Use `glnx_fchmod()`. Also note I dropped one `fchmod (tmpf, 0600)`
which is no longer necessary.
Update submodule: libglnx
Closes: #1011
Approved by: jlebon
(Note this PR was reverted in <https://github.com/ostreedev/ostree/pull/902>;
this version should be better)
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
This second iteration of this patch fixes the bug we hit the first time;
embarassingly enough I broke `ostree remote list` finding system remotes.
The fix is to have `ostree_repo_open()` figure out whether it's the same
as `/ostree/repo` for now.
Down the line...we might consider having the `ostree remote` command line itself
instatiate an `OstreeSysroot` by default, but this maximizes compatibility; we
just have to pay a small cost that `ostree` usage outside of that case like
`ostree static-delta` in a releng Jenkins job or whatever will do this `stat()`
too.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #1008
Approved by: mbarnes
And in general, if for some reason we can't write `user.` xattrs, provide an
error immediately rather than doing it during a later pull. This way the failure
cause is a lot more obvious.
Related: https://github.com/ostreedev/ostree/issues/991Closes: #993
Approved by: jlebon
For ostree-as-host, we're the superuser, so we'll blow past
any reserved free space by default. While deltas have size
metadata, if one happens to do a loose fetch, we can fill
up the disk.
Another case is flatpak: the system helper has similar concerns
here as ostree-as-host, and for `flatpak --user`, we also
want to be nice and avoid filling up the user's quota.
Closes: https://github.com/ostreedev/ostree/issues/962Closes: #987
Approved by: jlebon
An inverted condition in _ostree_repo_add_remote() was causing the
OstreeRepoFinder to delete precisely the wrong remote
configurations from memory once it was finished. It’s supposed to delete
the ones which it transiently added; but was instead deleting all the
existing remote configurations.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #985
Approved by: cgwalters
It's more natural for a few calling places. Prep for patches to go the other
way, which in turn are prep for adding a commit filter v2 that takes `struct
stat`.
`ot_gfile_type_for_mode()` was only used in this function, so inline it here.
Closes: #974
Approved by: jlebon
There's lots of mechanically replacing `OtTmpFile` with `GLnxTmpfile`;
the biggest changes are in the commit path. Symlink commits are now
very clearly separated from regular files. Symlinks are `OtCleanupUnlinkat`,
and regular files are `GLnxTmpfile`.
The commit codepath separates those as `_ostree_repo_commit_path_final()` and
`_ostree_repo_commit_tmpf_final()`. A nice aspect of all of this is that they
both *consume* the temporary on success. This avoids an extra spurious
`unlink()` call.
One of the biggest bits of code motion is in `commit_loose_regfile_object()`,
which no longer needs to care about symlinks. For the most parth though it's
just removing conditionals.
Update submodule: libglnx
Closes: #958
Approved by: jlebon
These are tuples of (collection ID, ref name) which are a globally-unique
form of local ref. They use OstreeCollectionRef as an identifier, and hence
need to be accessed using new API, as the existing API uses string
identifiers and sometimes accepts refspecs. Remote names are not
supported as part an OstreeCollectionRef.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #924
Approved by: cgwalters
Add {get,set}_collection_id() methods to OstreeRepo and some documentation
about the concept of a collection ID which globally identifies an
upstream repository. See the documentation for more details.
This will be used in future commits. For now, the new API is marked as
experimental (--enable-experimental-api).
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #924
Approved by: cgwalters
This will make some future additions to regenerate_summary() easier.
This commit introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #924
Approved by: cgwalters
This is followon work from previous cleanups. Basically
`stat_bare_content_object()` was the `fstatat()` logic
and `ostree_repo_read_bare_fd()` was the `openat()` implementation;
they duplicated some bits to find the object in staging, recurse
into parent etc.
Further, I wanted an internal-only version of this API which didn't allocate
`GFileInfo`/`GInputStream` but used a plain `fd` and `struct stat` to avoid
mallocs.
The end version here I think looks a lot nicer, since we deduplicate the various
`open()` calls in the different cases for example.
Closes: #952
Approved by: jlebon
Prep for future cleanup patches (in particular I want an internal-only
version at first that uses a fd+`struct stat`) to avoid allocations.
The new version avoids lots of deep nesting of conditionals as well
by hoisting the "not found" handling to an early return.
There's a bit of code duplication between the two cases but it's
quite worth the result.
Closes: #951
Approved by: jlebon
There are a few places in the code where ad-hoc validation was being
performed. Might as well formalise it a bit more.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #948
Approved by: cgwalters
Change the annotation of the out parameters on ostree_repo_load_file
from `(allow-none)` to `(optional) (nullable)`. `allow-none` is
ambiguous, since these parameters can be both NULL on input and set to
NULL on return.
Closes: #939
Approved by: cgwalters
Thinking about the problem of flatpak converting from `bare-user` to `bare-user-only`
"in place" by creating a new repo and doing a `pull-local`, I realized
that we can optimize this process by doing hardlinks for both metadata
and regular files. The repo formats are *almost* compatible, the
exception being symlinks.
An earlier patch caused us to do hardlinks for metadata, this patch takes things
to the next step and special cases this specific conversion. In this case we
need to parse the source object to determine whether or not it's a symlink.
Closes: #922
Approved by: alexlarsson
Our previous logic for import-via-hardlink only tried if the repo modes match,
but we *can* hardlink metadata between e.g. `archive` and `bare-user` repos, and
that's quite useful thing to do. Our documentation encourages converting to/from
those repo modes locally for build systems.
Closes: #922
Approved by: alexlarsson
Before this, if one had repos of matching mode but different owners,
which could happen if one e.g. makes a `bare` non-root repo in
`/ostree/deploy/$stateroot/var/tmp`, every time we tried to call `linkat()`
we'd get `EPERM` and fall back to a copy.
Fix this by saving the repo owner uid, and avoid trying to call `linkat()` if we
know it's going to fail. Of course most commonly in this scenario we'll
immediately fail trying to `chown` the files to `0`, but this is prep for a
future patch to improve `bare-user` → `bare-user-only` imports where we'll be a
bit more sophisticated.
Closes: #922
Approved by: alexlarsson
Its often the case that we want to look at objects inside a commit,
before the objects the transaction is finished. For instance:
https://github.com/flatpak/flatpak/pull/837
Which tries to verify the file permissions before committing the
transaction.
And:
1e5ffa926a
Which collects the storage size of the objects so that we can
put the total download size in the commit metadata.
I tried to find all the places where we did reads from the
object directories, and in particular this fixes:
- `ostree_repo_load_file()` for `bare` repos (`archive` was already working).
- `ostree_repo_query_object_storage_size()`
- Applying deltas that reference not-yet-commited objects
Closes: #916
Approved by: cgwalters
This came up in: https://github.com/ostreedev/ostree/pull/881
Basically doing streaming for metadata is dumb. Split up the metadata/content
paths so we pass metadata around as `GVariant`. This drops the last internal
caller of `ostree_repo_write_metadata_stream_trusted()` which was the dumb
function mentioned.
Closes: #923
Approved by: jlebon
If there are no deltas to be listed in the summary file, don’t bother
including the key for them in the additional metadata section of the
file. This saves a few bytes in some cases.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #911
Approved by: cgwalters
This makes it a bit more easily separable from the rest of the code in
the function. No functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #911
Approved by: cgwalters
Copying xattrs when manipulating the GPG keyring for a repository
causes errors when the underlying filesystem doesn't support writing
xattrs - overlayfs is a common example. It also causes the selinux
attributes of the keyring files to be copied from the temporary
location instead of properly inherited from the destination directory
(ending up, for example, as unconfined_u:object_r:user_tmp_t:s0, rather
than unconfined_u:object_r:data_home_t:s0)
Closes: #910
Approved by: cgwalters
Colin Walters
Dan Nicholson
Matthew Leeds
Robert McQueen
Philip Withnall
David Shea
Alexander Larsson
Owen W. Taylor