We were referencing the txn bits outside of the lock in the error
path. Generally shouldn't matter, but e.g. Rust wouldn't let us do this, and
race detector tooling will warn about it.
Closes: #1632
Approved by: jlebon
I generally like having variables include their units where applicable;
timer variables having `_secs` or `_ms`, etc.
Closes: #1632
Approved by: jlebon
Systemd units using ConditionNeedsUpdate run if the mtime of .updated in
the specified directory is newer than /usr. Since /usr has an mtime of
0, there's no way to have an older .updated file. Systemd units
typically specify ConditionNeedsUpdate=/etc or ConditionNeedsUpdate=/var
to support stateless systems like ostree.
Remove the file from the new deployment's /etc and the OS's /var
regardless of where they came from to ensure that these systemd units
run when booting new deployments. This will provide a method to run
services only on upgrade.
Closes: #1628https://bugzilla.gnome.org/show_bug.cgi?id=752950Closes: #1631
Approved by: cgwalters
Currently when I run `ostree prune` it hits a seg fault when the
hash_func is used (in this case g_str_hash) from the call stack
_ostree_repo_prune_tmp() -> g_hash_table_contains() ->
g_hash_table_lookup_node(). So the key, in this case dent->d_name, must
be corrupt in some way.
glnx_dirfd_iterator_next_dent() uses readdir() to get the dirent struct.
And according to the man page for readdir(3), "POSIX.1 explicitly notes
that this field should not be used as an lvalue" (in reference to
d_name). So this commit avoids modifying d_name in place and copies it
instead. This seems to avoid the seg fault.
Closes: #1627
Approved by: jlebon
If there’s a problem while aborting a transaction, store the error but
don’t report it until the end of the function — do a best effort at
clearing the rest of the transaction state first (since most of it
cannot fail).
If cleanup_tmpdir() fails (which, arguably, should not be a
showstopper), this allows a caller to recover and start a new
transaction in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1626
Approved by: jlebon
Similar to min-free-space-percent but it supports specific sizes
(in MB, GB or TB). Also, making min-free-space-percent and -size
mutually exclusive.
min-free-space-percent does not give a fine tuning of the free disk
space that a user might decide to keep. It can translate to very large
size (e.g. 1% = ~10GB on 1TB HDD) or very small (e.g. 1% = ~330MB on 32GB
system like Endless devices). Hence, it makes sense to introduce a config
option to honor specific size as per the user.
Closes: #1616
Approved by: jlebon
This adds subcommands that were missing from the ostree-admin man page,
and makes cosmetic fixes there and in the --help output to ensure
alphabetical order and remove trailing whitespace.
Closes: #1621
Approved by: jlebon
In some scenarios, it might make sense to let `ostree-prepare-root` do
the `/var` mount from the state root as before. For example, one may
want to do some system configuration before the switch root. This of
course comes at the expense of supporting `/var` as a mount point in
`/etc/fstab`.
Closes: #1617
Approved by: cgwalters
We need to include libglnx.h in places where ostree-autocleanups.h is
included, so that we get backports of G_DEFINE_AUTOPTR_CLEANUP_FUNC and
friends.
Closes: #1615
Approved by: jlebon
This reverts commit f1d9196076.
Since libglnx.h does not get installed, it can't be included in
ostree-autocleanups.h, which is included by ostree.h.
Closes: #1615
Approved by: jlebon
Currently the API that allows P2P operations (e.g. pulling an ostree ref
from a LAN or USB source) is hidden behind the configure flag
--enable-experimental-api. This commit makes the API public and makes
that flag essentially a no-op (leaving it in place in case we want to
use it again in the future). The P2P API has been tested over the last
several months and proven to work.
This means that since we're no longer using the "experimental" feature
flag, P2P builds of Flatpak will fail when using versions of OSTree from
this commit onwards, until Flatpak is patched in the near future. If you
want to build Flatpak < 0.11.8 with P2P enabled and link against OSTree
2018.6, you'll have to patch Flatpak. However, since Flatpak won't yet
have a hard dependency on OSTree 2018.6, it needs a new way to determine
if the P2P API in OSTree is available, so this commit adds a "p2p"
feature flag. This way the feature set is more semantically correct than
if we had continued to use the "experimental" feature flag.
In addition to making the P2P API public, this commit makes the P2P unit
tests run by default, removes the f27-experimental CI instance that's no
longer needed, changes a few man pages to reflect the changes, and
updates the bash completion script to accept the new commands and
options.
Closes: #1596
Approved by: cgwalters
This commit includes libglnx.h in ostree-autocleanups.h, so we get the
g_autoptr backports wherever they're needed. Also, remove the "#include
libglnx.h" lines elsewhere that are no longer needed.
Closes: #1596
Approved by: cgwalters
Use the recently introduced architecture for retrying network requests
on transient failure to do the same for delta superblock requests, now
that they’re queued.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1600
Approved by: jlebon
Just like all the other requests made for delta parts and objects by the
pull code, use a queue for delta superblocks. Currently this doesn’t do
any prioritisation or retries after transient failures, but it could do
in future.
This means that delta superblocks are now subject to the parallel
request limit in the fetcher, which was a problem highlighted here:
https://github.com/ostreedev/ostree/pull/1453#discussion_r168321706.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1600
Approved by: jlebon
Use the same G_IO_ERROR_* values for HTTP status codes in both fetchers.
The libsoup fetcher still handles a few more internal error codes than
the libcurl one; this could be built on in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
Various of the counters already have assertions like this; add some more
for total paranoia.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
This is exactly like the --random-500s option, except that it will cause
error 408 (request timeout) to be returned, rather than error 500
(internal server error).
This will be used in a following commit to test pull behaviour when
timeouts occur.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
This allows the retry code in ostree-repo-pull.c to recover from (for
example) timeouts at the libsoup layer in the stack, as well as from the
GSocket layer in the stack.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
Allow network requests to be re-queued if they failed with a transient
error, such as a socket timeout. Retry each request up to a limit
(default: 5), and only then fail the entire pull and propagate the error
to the caller.
Add a new ostree_repo_pull_with_options() option, n-network-retries, to
control the number of retries (including setting it back to the old
default of 0, if the caller wants).
Currently, retries are not supported for FetchDeltaSuperData requests,
as they are not queued. Once they are queued, adding support for retries
should be trivial. A FIXME comment has been left for this.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
When building the OstreeBloom code against old versions of glib, we have
to have the libglnx headers included so that it defines
G_DEFINE_AUTOPTR_CLEANUP_FUNC and friends for us.
This is similarly true for test-repo-finder-mount.c which indirectly
includes ostree-autocleanups.h.
Closes: #1605
Approved by: cgwalters
This commit rearranges a few things in ostree-repo-pull.c so that OSTree
will successfully compile with experimental API enabled and without
libsoup, libcurl, or avahi:
./autogen.sh --enable-experimental-api --without-soup --without-curl
--without-avahi
This is accomplished with two sets of changes:
1. Move ostree_repo_resolve_keyring_for_collection() so it can be used
even without libsoup or libcurl.
2. Add stub functions for ostree_repo_find_remotes_async() and
ostree_repo_pull_from_remotes_async(), and their _finish() counterparts,
so they return an error when libsoup or libcurl isn't available.
Closes: #1605
Approved by: cgwalters
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
Rename from `fdata` to `fetch_data` to clarify things and make it
consistent with other similar functionality in the file.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but does make the code a little
cleaner.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes; just makes the code a bit shorter
in a few places.
https://gcc.gnu.org/onlinedocs/gcc/Conditionals.html
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make some upcoming
refactoring a little easier.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
Stopping on the first error is nice if you just want to know if everything is ok, but
if you want to figure out all that is wrong its nice to be able to continue and
print all corruptions.
Closes: #1591
Approved by: cgwalters
The initial motivation for this is that the "staging" code currently
didn't rewrite the deployment refs, meaning that the staged commit
could be pruned.
Hence first, this new API ensures that deployments also
hold a strong ref to their commit, without relying on the magical
"deployment refs" that we inject. That has always been a weird
artifact of the strict layering separation between OstreeSysroot
and OstreeRepo.
I also plan to change rpm-ostree to start using this API to
hold references to base layers for client-side layering; it also
today generates various refs.
That said, if we still want to support multiple processes
writing to a single repo (as happens on EndlessOS today) we
still need to write refs; perhaps later we could add a concept
of "generators" or something that create refs based on whatever
logic?
Another minor thing this fixes is that we had a printf inside
the library; this propagates the pruned data to the higher level
which can log however it likes.
Closes: #1566
Approved by: jlebon
Prep for reworking how we do sysroot cleanup. We're going to
start doing more lowlevel pruning work there, and I wanted to avoid
duplicating the ref enumeration.
Closes: #1566
Approved by: jlebon
Likewise the corresponding support for syslinux introduced by commit
c5112c25e4, this one enables writing devicetree
filename into the uEnv.txt environment file for u-boot.
Since u-boot does not strictly defines variable names, here 'fdt_file' was
chosen as it appear to be one the most frequently adopted names in u-boot
default environments. Outer boot logic should of course comply with this choice
and use $fdt_file as the device tree file name to pass to boot commands.
This was tested on a custom board booting with u-boot.
Closes: #1590
Approved by: cgwalters
I feel like I'm drowning in a pile of experimental-but-almost-stable
features...
Anyways, since we made the feature opt-in in rpm-ostree in
https://github.com/projectatomic/rpm-ostree/pull/1352
let's mirror that a bit here with an environment variable so people
can play with it more easily.
The tests needed some tweaks; specifically we need to reload the
status fact after making changes. I'm still a bit uncertain
about the Ansible-as-tests.
But we add an upgrade test that uses the new environment variable.
Closes: #1583
Approved by: jlebon
This should give a more insightful error message if the user provides
a UID which is present on multiple keys.
This happens if you have an old key in your keyring which you are not
actively using any more, e.g. because it is too old. You still have
your old keys in your keyring, because you want to read old email
encrypted for that key, though.
The gpgme function used by ostree right now complains if a UID is found
on multiple keys:
https://www.gnupg.org/documentation/manuals/gpgme/Listing-Keys.html#index-gpgme_005fget_005fkey
The used API is too simple for that use case.
Note that it would be nicer if ostree picked the only valid signing key out
of the available keys rather than using the simplistic gpgme_get_key
function. It be nicer, of course, if there was such a gpgme function.
Closes: #1579
Approved by: cgwalters
Let's add a semi-colon between the "bootconfig swap" part and the
"deployment count change" to make it more clear they're separate
statements.
Closes: #1575
Approved by: cgwalters
While we do a `syncfs()` plus `FIFREEZE/THAW` for `/boot`, that
only comes during deployment finalization.
The code here today generally assumes that if the file exists
it's been fully written. So let's do a `fdatasync()` before
we do the `rename()`.
This just came out of looking through the code while working
on deployment staging. In that scenario there's a much larger
window between when we copy the kernel/initramfs and when we
sync `/boot`.
Closes: #1571
Approved by: jlebon
This is easier to `git grep` etc. versus ad-hoc English. Although
we still have some English for the prepare_transaction/commit which
acquire/release in separate phases.
Closes: #1572
Approved by: jlebon
These are further fixes based on running more of the rpm-ostree
test suite.
When dropping the staged deployment, we do need to do the
"post operations" such as bumping the sysroot mtime, so that
clients know something changed. We also need to regenerate
the deployment refs. And of course do a sysroot reload.
Also, add a "base cleanup" after creating a staged deployment
which also regenerates the refs.
Closes: #1570
Approved by: jlebon
There's no reason to do this. I didn't actually hit this problem,
but it's a corner case that just occurred to me while working on
the code.
I think callers should be adapted to skip trying to use staging
if there's no booted deployment.
Closes: #1568
Approved by: jlebon
This was pointed out in a previous PR review; we don't have
a need for the separate variables. Prep for adding an API for
this.
Closes: #1568
Approved by: jlebon
Doing so can break rpm-ostree, which wants to own the cleanup process
to ensure its baselayer refs are generated.
Further, doing the cleanup at shutdown time adds latency. It's also
going to be generally unnecessary as we expect repo pruning to have
been done when writing the refs.
Closes: #1567
Approved by: jlebon
This new information is already mostly part of `ostree.repo(5)`, though
let's put it in `ostree(1)` as well since that's where the switch is
officially documented.
Closes: #1560
Approved by: cgwalters
The code has been sitting around for a while but since I disabled
it by default, I doubt anyone is really using it or relying on it.
This patch and turns on locking by default, and also drops the
API which was only public in the experimental API builds.
Conceptually these are two distinct things, and we
may actually want to split up the patches.
I don't think this will break anyone, but it's hard to say for sure.
It's also going to be hard to find out until we actually release
I suspect...
But anyone who is broken should be able to add `locking=false` into
their repo config. On the flip side Endless has been shipping with
this enabled and it is reported to help.
The reason to drop the APIs: I'm a bit concerned about the interactions over time
between libostree's use of the API and any apps that start using it.
For example, if an app specifies a SHARED lock in their code, then
later internally we decide to temporarily grab an `EXCLUSIVE`, but the
app had a second thread/process that was `EXCLUSIVE` already, and
that process was waiting on the first bit of code, then we could
deadlock. I can't think of a real world situation where this would happen
yet though.
We are likely to in the future have say `fsck` take an external lock,
`checkout` grab a shared one, etc.
Closes: #1555
Approved by: jlebon
Today rpm-ostree has some code to run a "sanitycheck" on a deployment.
I had initially deleted that when adapting it to use the staging code,
but I realized it should work fine; we just won't see the merged
config, but that's OK.
When I readded that code it started crashing because we didn't
actually return the new deployment object. We'll gain some coverage
here as I'll land the code to have rpm-ostree use staging, then bump
the rpm-ostree tests here.
Closes: #1559
Approved by: jlebon
The fact that `ostree admin deploy` always itself loaded the
merge kargs masked a bug in the core. Let's change our tests
to not pass any kernel arguments to ensure we cover this.
The new logic in the CLI is a bit subtle, but if you read
carefully is a lot clearer I believe. Basically we have one
of a few "starting points" in the first section, which can
then be further augmented.
Closes: #1558
Approved by: jlebon
Testing out the staged API with rpm-ostree, ostree-prepare-root.service
in the initramfs was failing. Turned out that was because we didn't
have a `root=` kernel argument. Which was because we didn't have
any kernel arguments at all except `ostree=`.
That in turn was because we weren't loading the bootloader config
from the merge deployment.
The serialized deployment data holds the unique identity of
(osname, checksum, deployserial) - look for the real merge deployment
in our deployment list which has the bootloader arguments we need.
This issue was entirely masked by the `ostree admin deploy` command
which itself explicitly loads the merge deployment's kernel arguments
in every case - it never passes the `NULL` default down. A followup
patch will fix that.
Closes: #1558
Approved by: jlebon
When comparing deployments to determine whether we need a new
bootversion, we should also check whether the commit "version" metadata
is the same. Otherwise, we may end up with the a bootconfig whose
`title` includes a version that doesn't match the one from the
deployment checksum.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1343Closes: #1556
Approved by: cgwalters
Let's only print if the commit isn't already partial; this
addresses a spam of "marking commit partial" from fsck.
Closes: #1548
Approved by: cgwalters
Currently the create-usb command only generates a summary file in the
destination repo if one doesn't already exist, which means if one does
exist it becomes out of date after the new refs are pulled. This commit
makes ostree regenerate the summary regardless of whether it exists, so
that consumers such as ostree_repo_find_remotes_async() (and at a higher
level, GNOME Software) get an accurate picture of the refs available on
the mount. This commit also updates one of the unit tests to check that
the summary is accurate after a second pull into the same repo.
Since any user of the create-usb command is using collection IDs they
are new enough to be using the unsigned summary support. While it would
technically be possible to use summary signatures on a repo and use the
create-usb command on it (a scenario broken by this commit), the
create-usb command is designed for P2P distribution of refs, which
requires use of unsigned summary support. So this is a legitimate
narrowing of the tool.
Fixes https://github.com/ostreedev/ostree/issues/1465Closes: #1543
Approved by: cgwalters
This is a normal case when running unit tests in client code
on continuous integration infrastructure. When those tests are
running they will set G_DEBUG=fatal-warnings which will cause
the program to abort if a warning is emitted. Instead, emit
a debug message if the problem was that we couldn't connect to
the daemon.
Closes: #1542
Approved by: jlebon
Followup to: https://github.com/ostreedev/ostree/pull/1503
After starting some more work on on this in rpm-ostree, it is
actually simpler if the staged deployment just shows up in the list.
It's effectively opt-in today; down the line we may make it the default,
but I worry about breaking things that e.g. assume they can mutate
the deployment before rebooting and have `/etc` already merged.
There's not that many things in libostree that iterate over the deployment
list. The biggest change here is around the
`ostree_sysroot_write_deployments_with_options` API. I initially
tried hard to support a use case like "push a rollback" while retaining
the staged deployment, but everything gets very messy because that
function truly is operating on the bootloader list.
For now what I settled on is to just discard the staged deployment;
down the line we can enhance things.
Where we then have some new gymnastics is around implementing
the finalization; we need to go to some effort to pull the staged
deployment out of the list and mark it as unstaged, and then pass
it down to `write_deployments()`.
Closes: #1539
Approved by: jlebon
This means we can later use various operations to heal the repository
because ostree does not assume all objects are there.
This the begining of a fix for https://github.com/ostreedev/ostree/pull/345Closes: #1533
Approved by: cgwalters
This is a version of ostree_repo_traverse_commit_union that also
remembers where the objects came from, by recording the parent
relationships in a hashtable. This can be used to later find which
commits each object was from, which we want to use in fsck.
Closes: #1533
Approved by: cgwalters
reintroduce the feature that was reverted with commit:
28c7bc6d0e
Differently than the original implementation, now we don't attempt any
test for reflinks support on the parent repository, since the test
requires write access to the repository.
Additionally, also check that the two repositories are on the same
device before attempting any reflink.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1525
Approved by: cgwalters
If we're running as pid1, avoid printing anything in the normal
success paths as we don't want to affect the physical console by
default; the device may be using a splash screen, etc.
Also cleanup the code a bit to use a single variable
`running_as_pid1`, declare-and-initialize, use the
`bool` type, etc.
Closes: #1531
Approved by: jlebon
In prep for staging work, where we'll need to load the origin
for the staged deployment too.
The function was previously trying to avoid operating on an
instantiated deployment, but the data we need is in the deployment
object at that point.
Closes: #1538
Approved by: jlebon
Prep for handling staged deployments better; if we're not passed
the staged one back, then we just want to delete it but not
touch the bootloader config.
Closes: #1538
Approved by: jlebon
The reason we were returning a hashtable is a bit lost to history,
there's no reason to do so now anyways. Also port to declare-and-initialize
style and add more comments.
Closes: #1538
Approved by: jlebon
Add API to write a deployment state to `/run/ostree/staged-deployment`,
along with a systemd service which runs at shutdown time.
This is a big change to the ostree model for hosts,
but it closes a longstanding set of bugs; many, many people have
hit the "losing changes in /etc" problem. It also avoids
the other problem of racing with programs that modify `/etc`
such as LVM backups:
https://bugzilla.redhat.com/show_bug.cgi?id=1365297
We need this in particular to go to a full-on model for
automatically updated host systems where (like a dual-partition model)
everything is fully prepared and the reboot can be taken
asynchronously.
Closes: https://github.com/ostreedev/ostree/issues/545Closes: #1503
Approved by: jlebon
A newly created archive-mode repository won't have a uncompressed-objects-cache
directory, and uncompressed_objects_dir is -1 to flag that. The special meaning of
-1 meaning "cwd" for libglnx means that the current directory was scanned as
if it was an objects directory, producing unexpected results, especially if there
were any two-letter files/subdirs in the current directory.
Closes: #1537
Approved by: jlebon
Add a "hidden command" flag, and use it for `admin instutil` since
I regret adding it, and people should be using the API.
Prep for adding another hidden command as part of staging deployments.
(Down the line we should investigate deduplicating the recursive
command parsing code)
Closes: #1535
Approved by: jlebon
Currently OstreeRepoFinderResult, a data structure used by pull code
that supports P2P operations, has a hash table mapping refs to checksums
but doesn't include timestamp information. This means that clients have
no way of knowing just from the OstreeRepoFinderResult information if a
commit being offered by a peer remote is an update or downgrade until
they start pulling it. The client could check the summary or the commit
metadata for the timestamps, but this requires adding the temporary
remotes to the repo config, and ostree is already checking timestamps
before returning the results, so I think it makes more sense for them to
be returned rather than leaving it to the client. This limitation is
especially important for offline computers, because for online computers
the latest commit available from any remote is the latest commit,
period.
This commit adds a "ref_to_timestamp" hash table to
OstreeRepoFinderResult that is symmetric to "ref_to_checksum" in that it
shares the same keys. This is an API break, but it's part of the
experimental API, and none of the current users of that (flatpak,
eos-updater, and gnome-software) are affected. See the documentation for
more details on "ref_to_timestamp". One thing to note is the data
structure currently gets initialized in find_remotes_cb(), so only users
of ostree_repo_find_remotes_async() will get them, not users of, say,
ostree_repo_finder_resolve_all_async(). This is because the individual
OstreeRepoFinder implementations don't currently access the timestamps
(but I think this could be changed in the future if there's a need).
This commit will allow P2P support to be added to
flatpak_installation_list_installed_refs_for_update, which will allow
GNOME Software to update apps from USB drives while offline (it's
already possible online).
Closes: #1518
Approved by: cgwalters
In case of some kind of race or other weirdness we might be getting
non-matching versions of summary.sig and summary, where summary.sig
is the latest version. Currently we're saving them to the cache
directly after downloading them successfully, but they will then fail
to gpg validate. Then on the next run we'll keep using the cached files
even if they are incorrect, until summary.sig changes upstream.
This changes the order so that we verify the signatures before saving
to the cache, thus ensuring that we don't end up in a stuck state.
Fixes https://github.com/ostreedev/ostree/issues/1523Closes: #1529
Approved by: cgwalters
In ostree_repo_remote_fetch_summary_with_options(), if no summary is
found on the server and summary verification is enabled, the error
message implies that it's the summary signature that's missing, which is
misleading. This commit adds a more specific error message for the case
of a missing summary, which has the side effect of explicitly checking
for the case that signatures != NULL && summary == NULL after
repo_remote_fetch_summary(), even though that should never happen.
One effect of this is that if you run "flatpak remote-add" with an
incorrect URL you get a more helpful error message, and similarly for
other flatpak operations and other users of ostree.
Closes: #1522
Approved by: cgwalters
In libostree, the phrase "commit metadata" has two meanings-- one is the
first dictionary in a commit GVariant that stores metadata such as ref
bindings, and the other is the commit metadata in the summary file,
which stores the commit size, checksum, and timestamp. In
find_remotes_process_refs(), the entire commit GVariant was being
referred to as commit metadata, so this commit changes the variable
name and a comment to make things more consistent.
Closes: #1528
Approved by: cgwalters
In _try_clone_from_payload_link, don't try to do the clone in the
parent repo, because we don't want to modify that. parent repos are
typically used when you want a shared, immutable base.
For example in flatpak, the parent repo is the system repo which you
don't have write access to, so any modification to it will fail with
EACCES, making it impossible to install via the system helper.
Closes: #1524
Approved by: cgwalters
Ostree uses the OtChecksum data structure as a wrapper around GChecksum
(depending on what libraries are available at compile time). According
to the docs for g_checksum_get_digest(), a GChecksum value can no longer
be updated after that function is called. Ostree enforces this by
setting "initialized" to FALSE after getting the digest, but this leads
to ot_checksum_clear() avoiding freeing any memory, leading to leaks. So
this commit adds a "closed" value that gets set when getting a digest
and checked when updating the value, so the initialized value can be
used only for memory management.
Closes: #1521
Approved by: jlebon
ostree_repo_pull_from_remotes_async() passes along some options to
ostree_repo_pull_with_options(), so document them.
Closes: #1519
Approved by: cgwalters
The main blocker for doing this before was the `goto out` handling
for remounting `/boot`. Handle that by factoring out the bits that
require it to a helper function, and do the C/GError equivalent of
"try/finally".
Not prep for anything right now, just decided to do this since I had the file
open.
Closes: #1515
Approved by: jlebon
For staged deploy, we want to pay the cost of creating copies from
`/usr/etc` → `/etc` at stage time, since it can be expensive. (We
want to minimize time spent during shutdown).
Split it up into two functions; the logic is also simply clearer.
Closes: #1514
Approved by: jlebon
Prep for deployment staging. We had the code to hande "explicit kargs" in one
place, but the "use merge deployment" karg bits mixed in with the "/etc merge"
logic. Those are separate things, and it's better to have karg handling in one
place.
Closes: #1514
Approved by: jlebon
A quick turnaround to include one PR: https://github.com/ostreedev/ostree/pull/1508
"switchroot: Ensure /run/ostree-booted is created even without initramfs"
This fixes ostree when booting without an initramfs. Thanks to @akiernan for the
bug report and helping review the fix! I'm working on enhancing
the test suite, which will help in adding some coverage here.
Also for this release I'm going to avoid adding a "stub" symbol section
to the `-released.sym` file; I don't believe it's necessary.
Closes: #1512
Approved by: jlebon
See https://mail.gnome.org/archives/ostree-list/2018-March/msg00012.html
If ostree-prepare-root is run as pid 1 (i.e we're not using an initramfs), then
anything we write outside the target sysroot (such as `/run/ostree-booted`) will
be lost.
Since `ostree-remount.service` runs fairly early in boot, and is triggered via
`ConditionKernelCommandLine=ostree`, we can just touch the file there in
addition.
Closes: #1508
Approved by: akiernan
It's been over a month since 2018.2; we have a few features and various fixes,
and the "stage" work pending which is pretty invasive. Time for a new release!
Closes: #1506
Approved by: jlebon
Ensures it's labeled consistently. Prep for staged deployments which reworks the
logic around when the origin file is written.
Closes: #1505
Approved by: jlebon
Pulling some of this out of stage deploy work. It's generally better as it's
easier to change functions to have multiple callers.
Closes: #1505
Approved by: jlebon
Prep for staged deployments; they won't be in the primary deployment
list, and we want to print them first.
Also pull in some code from rpm-ostree for the red/bold bits and use
that tree-wide.
Update submodule: libglnx
Closes: #1504
Approved by: jlebon
Colin Walters
Jonathan Lebon
Dan Nicholson
Matthew Leeds
Alexander Larsson
Philip Withnall
Umang Jain
Andrea Galbusera
Tobias Mueller
Sam Spilsbury
Giuseppe Scrivano
Owen W. Taylor