To allow for FIPS mode, we need to also install the HMAC file from
`/usr/lib/modules` to `/boot` alongside the kernel image where the
`fips` dracut module will find it. For details, see:
https://github.com/coreos/fedora-coreos-tracker/issues/302
Note I didn't include the file in the boot checksum since it's itself a
checksum of the kernel, so we don't really gain much here other than
potentially causing an unnecessary bootcsum bump.
I was hitting `SIGSEGV` when running `cosa build` and narrowed it down
to #1954. What's happening here is that because we're using the default
context, when we unref it in the out path, it may not actually destroy
the `GSource` if it (the context) is still ref'ed elsewhere. So then,
we'd still get events from it if subsequent operations iterated the
context.
This patch is mostly a revert of #1954, except that we still keep a ref
on the `GSource`. That way it is always safe to destroy it afterwards.
(And I've also added a comment to explain this better.)
We're creating the timer source and then passing ownership to the
context, but because we didn't free the pointer, we would still call
`g_source_destroy` in the exit path. We'd do this right after doing
`unref` on the context too, which would have already destroyed and
unref'ed the source.
Drop that and just restrict the scope of that variable down to make
things more obvious.
Just noticed this after reviewing #1953.
In glib 2.62 this has been changed to emitting a warning. Use G_STRFUNC
instead, which has been available for a long time and is already used in
other places in ostree.
zipl is a bit special in that it parses the BLS config files
directly *but* we need to run the command to update the "boot block".
Hence, we're not generating a separate config file like the other
backends. Instead, extend the bootloader interface with a `post_bls_sync`
method that is run in the same place we swap the `boot/loader` symlink.
We write a "stamp file" in `/boot` that says we need to run this command.
The reason we use stamp file is to prevent the case where the system is
interrupted after BLS file is updated, but before zipl is triggered,
then zipl boot records are not updated.
This opens the door to making things eventually-consistent/reconcilable
by later adding a systemd unit to run `zipl` if we're interrupted via
a systemd unit - I think we should eventually take this approach
everywhere rather than requiring `/boot/loader` to be a symlink.
Author: Colin Walters <walters@verbum.org>
Tested-by: Tuan Hoang <tmhoang@linux.ibm.com>
Co-Authored-By: Tuan Hoang <tmhoang@linux.ibm.com>
More "scan-build doesn't understand GError and our out-param conventions"
AKA "these errors would be impossible with Rust's sum type Result<> approach".
Got this error when trying to rebase libostree in RHEL:
```
Error: CLANG_WARNING: [#def1]
libostree-2019.2/src/libostree/ostree-repo-checkout.c:375:21: warning: Access to field 'disable_xattrs' results in a dereference of a null pointer (loaded from variable 'repo')
```
I think what's happening is it sees us effectively testing
`if (repo == NULL)` via the `while (current_repo)`. Let's
tell it we're sure it's non-null right after the loop.
Tiny release. Just want to get out the important bugfixes instead of
backporting patches (notably the gpg-agent stuff and
`ostree-finalize-staged.service` ordering).
Closes: #1927
Approved by: cgwalters
After the corruption has been fixed with "ostree fsck -a --delete", a
second run of the "ostree fsck" command will print X partial commits
not verified and exit with a zero.
The zero exit code makes it hard to detect if a repair operation needs
to be run. When ever fsck creates a partial commit it should add a
reason for the partial commit to the state file found in
state/<hash>.commitpartial. This will allow a future execution of the
fsck to still return an error indicating that the repository is still
in the damaged state, awaiting repair.
Additional reason codes could be added in the future for why a partial
commit exists.
Text from: https://github.com/ostreedev/ostree/pull/1880
====
cgwalters commented:
To restate, the core issue is that it's valid to have partial commits
for reasons other than fsck pruned bad objects, and libostree doesn't
have a way to distinguish.
Another option perhaps is to write e.g. fsck-partial into the
statefile state/<hash>.commitpartial which would mean "partial, and
expected to exist but was pruned by fsck" and fsck would continue to
error out until the commit was re-pulled. Right now the partial stamp
file is empty, so it'd be fully compatible to write a rationale into
it.
====
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Closes: #1910
Approved by: cgwalters
If there are different deployments for the same commit version, the BLS
snippets will have the same title fields (but different version fields):
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree)
But bootloaders could expect the title field to be unique for BLS files.
For example, the zipl bootloader used in the s390x architecture uses the
field to name the boot sections that are created from the BLS snippets.
So two BLS snippets having the same title would lead to zipl failing to
create the IPL boot sections because they would have duplicated names:
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Error: Config file '/etc/zipl.conf': Line 0: section name 'TestOS 42 20190902.0 (ostree)' already specified
Avoid this by always including the deployment index along with the commit
version in the title field, so this will be unique even if there are BLS
files for deployments that use the same commit version:
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree:2)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree:1)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree:0)
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Building bootmap in '/boot'
Building menu 'zipl-automatic-menu'
Adding #1: IPL section 'TestOS 42 20190902.0 (ostree:0)' (default)
Adding #2: IPL section 'TestOS 42 20190902.0 (ostree:1)'
Adding #3: IPL section 'TestOS 42 20190902.0 (ostree:2)'
Preparing boot device: dasda (0120).
Done.
Closes: #1911
Approved by: cgwalters
Currently the BLS fragments fields write is non-determinisitc. The order
of the fields will depend on how the iterator of the options GHashTable
iterates over the key/value pairs.
But some bootloaders expect the fields to be written in a certain order.
For example the zipl bootloader (used in the s390x architecture) fails to
parse BLS files if the first field is not the 'title' field, since that's
used to name the zipl boot sections that are created from the BLS files.
Write the fields in a deterministic order, following what is used in the
example file of the BootLoaderspec document:
https://systemd.io/BOOT_LOADER_SPECIFICATION
Related: https://github.com/ostreedev/ostree/issues/1888Closes: #1904
Approved by: cgwalters
OSTree has some logic to preserve comment lines in the BLS fragments, but
the BLS fragments are always created on new deployments so the comments
are never carried.
Also, OSTree never writes BLS fragments with comments so these will only
be present in BLS files that were modified outside of OSTree. Something
that should be avoided in general.
Finally, there is a bug in the logic that causes BLS files to have lines
with only a newline character.
The ostree_bootconfig_parser_parse_at() function reads the bootconfig file
using glnx_fd_readall_utf8() but this function NUL terminates the returned
string with the file contents.
So when the string is later split using '\n' as delimiter, the last token
is set to '\0' and a wrong GVariant will be added to the lines GPtrArray
in the OstreeBootconfigParser struct.
This will lead to bootconfig files that contains lines with only a newline
character, since the key in the GVariant would be set to NUL and won't be
present in the options GHashTable of the OstreeBootconfigParser struct.
So let's just remove that logic since is never used and makes BLS files to
have wrong empty lines.
Before this patch:
$ tail -n 4 /boot/loader/entries/ostree-1-testos.conf | hexdump -C
00000000 74 69 74 6c 65 20 54 65 73 74 4f 53 20 34 32 20 |title TestOS 42 |
00000010 32 30 31 39 30 38 32 34 2e 30 20 28 6f 73 74 72 |20190824.0 (ostr|
00000020 65 65 29 0a 0a 0a 0a |ee)....|
00000027
After this patch:
$ tail -n 4 /boot/loader/entries/ostree-1-testos.conf | hexdump -C
00000000 76 65 72 73 69 6f 6e 20 31 0a 6f 70 74 69 6f 6e |version 1.option|
00000010 73 20 72 6f 6f 74 3d 4c 41 42 45 4c 3d 4d 4f 4f |s root=LABEL=MOO|
00000020 20 71 75 69 65 74 20 6f 73 74 72 65 65 3d 2f 6f | quiet ostree=/o|
00000030 73 74 72 65 65 2f 62 6f 6f 74 2e 31 2f 74 65 73 |stree/boot.1/tes|
00000040 74 6f 73 2f 61 65 34 36 34 39 36 38 30 64 33 65 |tos/ae4649680d3e|
00000050 38 33 62 32 34 65 34 37 66 38 64 66 31 30 38 31 |83b24e47f8df1081|
00000060 38 62 66 36 39 38 39 64 36 34 37 61 62 32 38 38 |8bf6989d647ab288|
00000070 64 31 63 30 39 38 30 36 65 34 61 33 36 61 34 65 |d1c09806e4a36a4e|
00000080 62 62 66 36 2f 30 0a 6c 69 6e 75 78 20 2f 6f 73 |bbf6/0.linux /os|
00000090 74 72 65 65 2f 74 65 73 74 6f 73 2d 61 65 34 36 |tree/testos-ae46|
000000a0 34 39 36 38 30 64 33 65 38 33 62 32 34 65 34 37 |49680d3e83b24e47|
000000b0 66 38 64 66 31 30 38 31 38 62 66 36 39 38 39 64 |f8df10818bf6989d|
000000c0 36 34 37 61 62 32 38 38 64 31 63 30 39 38 30 36 |647ab288d1c09806|
000000d0 65 34 61 33 36 61 34 65 62 62 66 36 2f 76 6d 6c |e4a36a4ebbf6/vml|
000000e0 69 6e 75 7a 2d 33 2e 36 2e 30 0a 74 69 74 6c 65 |inuz-3.6.0.title|
000000f0 20 54 65 73 74 4f 53 20 34 32 20 32 30 31 39 30 | TestOS 42 20190|
00000100 38 32 34 2e 30 20 28 6f 73 74 72 65 65 29 0a |824.0 (ostree).|
0000010f
Closes: #1904
Approved by: cgwalters
I've seen people confused by this error in the case where
`/boot` isn't mounted or the BLS fragments were deleted, etc.
If you understand ostree deeply it's clear but, let's do
better here and a direct error message for the case where
we can't find `/boot/loader` which is the majority of these.
The other case could happen if e.g. just the BLS fragment
for the booted deployment was deleted; let's reword that
one a bit too.
Closes: #1905
Approved by: rfairley
When running under qemu, unimplemented ioctls such as FIFREEZE
return ENOSYS, and this causes the deployment to fail.
Catch this and handle it like EOPNOTSUPP.
I'm not sure if qemu's behaviour is fully correct here (or if it should
return EOPNOTSUPP) but it's trivial to handle regardless.
Closes: #1901
Approved by: cgwalters
Add dummy stubs for GPG public functions to be compiled instead of
original code in case if support of GPG is disabled.
Need that to keep API backward compatibility.
Based on original code from file `ostree-gpg-verify-result.c`.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
Some gpg-named functions/variables should be used for any signature
system, so remove "gpg_" prefix from them to avoid confusion.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
Do not build the code related to GPG sign and verification if
GPGME support is disabled.
Public functions return error 'G_IO_ERROR_NOT_SUPPORTED' in case if
gpg-related check is rquested.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
There's a valid use case for enabling the timestamp downgrade check
while still also using override commits.
We'll make use of this in Fedora CoreOS, where the agent specifies the
exact commit to upgrade to, while still enforcing that it be newer.
Closes: #1891
Approved by: cgwalters
This way projects can dispatch at run-time based on ostree's
build time options, e.g. detect the availability of GPG.
Closes: #1890
Approved by: jlebon
Move the OstreeKernelArgs autoptr cleanup definition to
ostree-autocleanups.h, which will only expose the definitions when
building ostree or if glib is new enough. The include of
ostree-kernel-args.h needs to be moved before ostree-autocleanups.h in
ostree.h so that the OstreeKernelArgs type is declared when the autoptr
cleanup is defined. All the places it's used already pull in libglnx.h
first so that the compat macros are picked up if glib it too old during
the ostree build.
Closes: #1892
Approved by: jlebon
When a temporary directory is used for GPG operations, it's pretty clear
that the running agent will be useless after the directory is deleted.
Call the new `ot_gpgme_kill_agent ()` helper to kill gpg-agent rather
than leaving them it hanging around forever.
As it turns out, gnupg does have code to make gpg-agent automatically
exit when the homedir is removed (https://dev.gnupg.org/T2756), but
that's only available on gnupg 2.2 or newer. Possibly this code can be
dropped later when that's more widely deployed or users/distros have
been advised to backport the necessary changes.
Closes: #1799
Approved by: cgwalters
Introduce a new signature attribute for the key expiration timestamp and
display it when the key has a non-zero expiration time. Without this,
the error shown is `BAD signature`, which isn't correct.
Closes: #1872
Approved by: cgwalters
This change makes public the current kargs API in src/libostree/ostree-kernel-args.c
and adds documentations.
Upstreams the new kargs API from rpm-ostree/src/libpriv/rpmostree-kargs-process.c
Merges libostree_kernel_args_la_SOURCES to libostree_1_la_SOURCES in Makefile-libostree.am
Upstreams tests/check/test-kargs.c from rpm-ostree.
Closes: #1833Closes: #1869
Approved by: jlebon
Similar to ostree_repo_write_archive_to_mtree(), but takes
a file descriptor to read the archive from instead of mandating
a file path.
Usefull for importing archives into an OSTree repo over a socket
or from standard input in command line tools.
Closes: #1862
Approved by: jlebon
Use GIOErrorEnum as the return value for
_ostree_fetcher_http_status_code_to_io_error(), to avoid an
implicit cast from GIOError.
Closes: #1857
Approved by: cgwalters
Colin Walters
Jonathan Lebon
OpenShift Merge Robot
Umang Jain
Dan Nicholson
Philip Withnall
Jason Wessel
Javier Martinez Canillas
Daniel Drake
Denis Pynkin
Rafael Fonseca
Matthew Leeds
Allen Bai
Tristan Van Berkom
Robert Fairley
Felix Krull