I'm aiming to do some more work on the Rust side around `fsck`
like functionality, and this is a useful primitive. There isn't
a great Rust crate for xattrs, and I think it's better to share this
code.
This adds two new object types for storing xattrs separately from
content objects.
`.file-xattrs` are regular files storing xattrs content, encoded as
GVariant. Each object is keyed by the checksum of its content, allowing
for multiple references.
`.file-xattrs-link` are hardlinks which are associated to file objects.
Each object is keyed by the same checksum of the corresponding file
object. The target of the hardlink is an existing file-xattrs object.
In case of reaching the limit of too many links, this object could be
a plain file too.
I was going to add some new API and I noticed that this function
never returns an error; presumably at one point it did, but
not anymore. It simplifies the code flow noticeably
to remove that.
This gets the subpath for a delta index file, which is of the form
"delta-indexes/$commit.index", that contains all the deltas going
to the particular commit.
These had been added assuming 2019.7 would be the next version, but now
it's 2020 and there's been a release. In the case of
`OstreeCommitSizesEntry`, I'd forgotten to move it forward from 2019.5
to 2019.7 in the time between when I started working on the feature and
it landed.
This function parses the object listing in the `ostree.sizes` metadata
and returns an array of `OstreeCommitSizesEntry` structures.
Unfortunately, for reasons I don't understand, the linker wants to
resolve `_ostree_read_varuint64` from `ostree-core.c` even though it's
not used by `test-checksum.c` at all.
Do not build the code related to GPG sign and verification if
GPGME support is disabled.
Public functions return error 'G_IO_ERROR_NOT_SUPPORTED' in case if
gpg-related check is rquested.
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Closes: #1889
Approved by: cgwalters
Currently the API that allows P2P operations (e.g. pulling an ostree ref
from a LAN or USB source) is hidden behind the configure flag
--enable-experimental-api. This commit makes the API public and makes
that flag essentially a no-op (leaving it in place in case we want to
use it again in the future). The P2P API has been tested over the last
several months and proven to work.
This means that since we're no longer using the "experimental" feature
flag, P2P builds of Flatpak will fail when using versions of OSTree from
this commit onwards, until Flatpak is patched in the near future. If you
want to build Flatpak < 0.11.8 with P2P enabled and link against OSTree
2018.6, you'll have to patch Flatpak. However, since Flatpak won't yet
have a hard dependency on OSTree 2018.6, it needs a new way to determine
if the P2P API in OSTree is available, so this commit adds a "p2p"
feature flag. This way the feature set is more semantically correct than
if we had continued to use the "experimental" feature flag.
In addition to making the P2P API public, this commit makes the P2P unit
tests run by default, removes the f27-experimental CI instance that's no
longer needed, changes a few man pages to reflect the changes, and
updates the bash completion script to accept the new commands and
options.
Closes: #1596
Approved by: cgwalters
It will be used by successive commits to keep track of the payload
checksum for objects stored in the repository.
The goal is that files having the same payload but different xattrs can
take advantage of reflinks where supported.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1443
Approved by: cgwalters
There are a few cases for knowing whether a commit has identical
content to another commit. Some people want to do a "promotion workflow",
where the content of a commit on a tesitng branch is then "promoted"
to a production branch with `ostree commit --tree=ref`.
Another use case I just hit in rpm-ostree deals with
[jigdo](https://github.com/projectatomic/rpm-ostree/issues/1081) where we're
importing RPMs on both the client and server, and will be using the
content checksum, since the client/server cases inject different metadata
into the commit object.
Closes: https://github.com/ostreedev/ostree/issues/1315Closes: #1449
Approved by: jlebon
This is analogous to the filtering support for the commit API: we allow
library users to skip over checking out specific files. This is useful
in some tricky situations where we *know* that the files to be checked
out will conflict with existing files in subtle ways.
One such example is in rpm-ostree support for multilib. There, we want
to allow checking out a package onto an existing tree, but skipping over
files that are not coloured to our preferred value (e.g. not overwriting
an i686 version of `ldconfig` if we already have the `x86_64` version).
See https://github.com/projectatomic/rpm-ostree/pull/1227 for details.
Closes: #1441
Approved by: cgwalters
SPDX License List is a list of (common) open source
licenses that can be referred to by a “short identifier”.
It has several advantages compared to the common "license header texts"
usually found in source files.
Some of the advantages:
* It is precise; there is no ambiguity due to variations in license header
text
* It is language neutral
* It is easy to machine process
* It is concise
* It is simple and can be used without much cost in interpreted
environments like java Script, etc.
* An SPDX license identifier is immutable.
* It provides simple guidance for developers who want to make sure the
license for their code is respected
See http://spdx.org for further reading.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1439
Approved by: cgwalters
The old documentation had outdated and incomplete annotations, and
didn’t make it very clear that out_remote could legitimately return
NULL.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1437
Approved by: cgwalters
Previously we were doing e.g. `ot_util_filename_validate()` specifically inline
in dirtree objects, but only *after* writing them into the staging directory (by
default). In (non-default) cases such as not using a transaction, such an object
could be written directly into the repo.
A notable gap here is that `pull-local --untrusted` was *not* doing
this verification, just checksums. We harden that (and also the
static delta writing path, really *everything* that calls
`ostree_repo_write_metadata()` to also do "structure" validation
which includes path traversal checks. Basically, let's try hard
to avoid having badly structured objects even in the repo.
One thing that sucks in this patch is that we need to allocate a "bounce buffer"
for metadata in the static delta path, because GVariant imposes alignment
requirements, which I screwed up and didn't fulfill when designing deltas. It
actually didn't matter before because we weren't parsing them, but now we are.
In theory we could check alignment but ...eh, not worth it, at least not until
we change the delta compiler to emit aligned metadata which actually may be
quite tricky. (Big picture I doubt this really matters much right now
but I'm not going to pull out a profiler yet for this)
The pull test was extended to check we didn't even write a dirtree
with path traversal into the staging directory.
There's a bit of code motion in extracting
`_ostree_validate_structureof_metadata()` from `fsck_metadata_object()`.
Then `_ostree_verify_metadata_object()` builds on that to do checksum
verification too.
Closes: #1412
Approved by: jlebon
It'd all be really nice if there was some sort of `O_TMPFILE` for symlinks, but
anyways the way we were doing a generic "make temp file than rename" actually
defeats some of the point of `O_TMPFILE`. It's now fully safe to do "copy to
self", so let's do that for regfiles.
Closes: #1378
Approved by: jlebon
g-ir-scanner was spitting this warning:
src/libostree/ostree-core.c:281: Warning: OSTree:
ostree_validate_collection_id: unknown parameter 'rev' in
documentation comment, should be 'collection_id'
Closes: #1322
Approved by: pwithnall
Change the regexp for validating refs to require at least one letter or digit
before allowing the other special chars in the set `[.-_]`. Names that start
with `.` are traditionally Unix hidden files; let's ignore them under the
assumption they're metadata for some other tool, and we don't want to
potentially conflict with the special `.` and `..` Unix directory entries.
Further, names starting with `-` are problematic for Unix cmdline option
processing; there's no good reason to support that. Finally, disallow `_` just
on general principle - it's simpler to say that ref identifiers must start with
a letter or digit.
We also ignore any existing files (that might be previously created refs) that
start with `.` in the `refs/` directory - there's a Red Hat tool for content
management that injects `.rsync` files, which is why this patch was first
written.
V1: Update to ban all refs starting with a non-letter/digit, and
also add another call to `ostree_validate_rev` in the pull
code.
Closes: https://github.com/ostreedev/ostree/issues/1285Closes: #1286
Approved by: jlebon
There's a subtle issue going on with the way we use `UNION_IDENTICAL`
now in rpm-ostree. Basically, the crux of the issue is that we checkout
the whole tree from the system repo, but then overlay packages by
checking out from the pkgcache repo. This is an easy way to break the
assumption that we will be merging hardlinks from the same repo.
This ends up causing issues like:
https://github.com/projectatomic/rpm-ostree/issues/1047
There, `vim-minimal` is already part of the host and has an object for
`/usr/share/man/man1/ex.1.gz`. `vim-common` has that same file, but
because it's unpacked in the pkgcache repo first, the hardlinks are not
the same.
There are a few ways we *could* work around this in rpm-ostree itself,
e.g. by re-establishing hardlinks when we do the content pull into the
system repo, but it still felt somewhat hacky. Let's just do this the
proper way and fall back to checksumming the target file if needed,
which is what librpm does as well in this case. Note that we only
checksum if they're not hard links, but they're the same size.
Closes: #1258
Approved by: cgwalters
This is like `ostree_checksum_file` but fd-relative. This will be used
by https://github.com/ostreedev/ostree/pull/1258.
AFAICT, we actually didn't have any tests that check the `checksum` CLI.
Add a basic one here to test the old code as well as the new code.
Closes: #1263
Approved by: cgwalters
This ends up a lot better IMO. This commit is *mostly* just
`s/glnx_close_fd/glnx_autofd`, but there's also a number of hunks like:
```
- if (self->sysroot_fd != -1)
- {
- (void) close (self->sysroot_fd);
- self->sysroot_fd = -1;
- }
+ glnx_close_fd (&self->sysroot_fd);
```
Update submodule: libglnx
Closes: #1259
Approved by: jlebon
This simplifies a lot of code; the header function was structured
to write to an input stream, but many callers only wanted the checksum,
so it's simpler (and error-free) to simply allocate a whole buffer
and checksum that.
For the callers that want to write it, it's also still simpler to allocate the
buffer and write the whole thing rather than having this function do the
writing.
A lot of the complexity here again is a legacy of the packfile code, which is
dead.
This is prep for faster regfile commits where we can avoid `G{In,Out}putStream`.
Closes: #1257
Approved by: jlebon
Nothing was using the `bytes_written` data (we always discard partially written
tmpfiles), so simplify everything by dropping it. Further, we always passed an
offset of `0`, so drop that argument too. (I believe that this was previously
used by the "pack files" code that we deleted long ago)
Second, we had an unnecessary internal wrapper for this function; drop that too.
Closes: #1257
Approved by: jlebon
The faster (OpenSSL/GnuTLS) code lived in a `GInputStream` wrapper, and that
adds a lot of weight (GObject + vtable calls). Move it into a simple
autoptr-struct wrapper, and use it in the metadata path, so we're
now using the faster checksums there too.
This also drops a malloc there as the new API does hexdigest in place to a
buffer.
Prep for more work in the commit path to avoid `GInputStream` for local file
commits, and ["adopting" files](https://github.com/ostreedev/ostree/pull/1255).
Closes: #1256
Approved by: jlebon
We can't use the cache if the file we want to commit has been modified
by the client through the file info or xattr modifiers. We would
prematurely look into the cache in `write_dfd_iter_to_mtree_internal`,
regardless of whether any filtering applied.
We remove that path there, and make sure that we only use the cache if
there were no modifications. We rename the `get_modified_xattrs` to
`get_final_xattrs` to reflect the fact that the xattrs may not be
modified.
One tricky bit that took me some time was that we now need to store the
st_dev & st_ino values in the GFileInfo because the cache lookup relies
on it. I'm guessing we regressed on this at some point.
This patch does slightly change the semantics of the xattr callback.
Previously, returning NULL from the cb meant no xattrs at all. Now, it
means to default to the on-disk state. We might want to consider putting
that behind a flag instead. Though it seems like a more useful behaviour
so that callers can only override the files they want to without losing
original on-disk state (and if they don't want that, just return an
empty GVariant).
Closes: #1165Closes: #1170
Approved by: cgwalters
For the old `OSTREE_REPO_MODE_ARCHIVE_Z2`. Use it mostly tree
wide except for the repo finder tests (to avoid conflicting with
some outstanding PRs).
Just noted another user coming in some of those tests and wanted to do a
cleanup.
Closes: #1209
Approved by: jlebon
We added a `.dir-locals.el` in commit: 9a77017d87
There's no need to have it per-file, with that people might think
to add other editors, which is the wrong direction.
Closes: #1206
Approved by: jlebon
Conceptually `ostree-repo-pull.c` should be be written using
just public APIs; we theoretically support building without HTTP
for people who just want to use the object store portion and
do their own fetching.
We have some nontrivial behaviors in the pull layer though; one
of those is the "bareuseronly" verification. Make a new internal
API that accepts flags, move it into `commit.c`. This
is prep for further work in changing object import to support
reflinks.
Closes: #1193
Approved by: jlebon
In almost all places. There are just a few exceptions; one tricky bit for
example is that the repo config must still have `mode=archive-z2`, since
`archive` used to mean something else. (We could very likely just get rid of
that check, but eh, later).
I also added a test that one can still do `ostree repo init --mode=archive-z2`.
Closes: #1125
Approved by: jlebon
For both flatpak and ostree-as-host, we really want to verify up front during
pulls that we're not being downgraded. Currently both flatpak and
`OstreeSysrootUpgrader` do this before deployments, but at that point we've
already downloaded all the data, which is annoying.
Closes: https://github.com/ostreedev/ostree/issues/687Closes: #1055
Approved by: jlebon
Mostly for the latest `-Wmaybe-uninitialized` fix, but while here also port some
places to newer APIs.
Update submodule: libglnx
Closes: #1027
Approved by: jlebon
See: https://github.com/projectatomic/rpm-ostree/issues/885
If we get a successful Apache directory listing HTML when fetching what we
intend to be a ref, we'd dump the HTML into the error.
I did some scanning of the pull code, and this was the only case
I saw offhand where we were dumping text out into an error. Which
makes sense, since most of our formats are binary, the exeptions I
think are just `repo/config` and `repo/refs/`.
Closes: #1015
Approved by: mbarnes
Colin Walters
Daniel Kolesa
Luca BRUNO
Joseph Marrero
Timothée Ravier
Alexander Larsson
Dan Nicholson
Denis Pynkin
Felix Krull
Matthew Leeds
Giuseppe Scrivano
Jonathan Lebon
Marcus Folkesson
Philip Withnall
Dusty Mabe