KIRSKSTONE: overwrite syntax
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com>
This commit is contained in:
Christophe Priouzeau committed
1 parent
5e68bca87d
commit
483a6968fa
66 files changed
+551
-552
No files matched your search
@@ -35,20 +35,17 @@ BOOTDEVICE_LABELS ??= "emmc nand-4-256 nor-sdcard sdcard"
|
||||
# =========================================================================
|
||||
# Default machine feature
|
||||
MACHINE_FEATURES = "usbhost usbgadget alsa screen ext2"
|
||||
MACHINE_FEATURES_append = " ${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'optee', '', d)} "
|
||||
MACHINE_FEATURES_append = " tpm2 "
|
||||
MACHINE_FEATURES:append = " ${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'optee', '', d)} "
|
||||
MACHINE_FEATURES:append = " tpm2 "
|
||||
|
||||
# Enable installation of INITRD image on bootfs side
|
||||
MACHINE_FEATURES_append = " initrd "
|
||||
MACHINE_FEATURES:append = " initrd "
|
||||
# Remove InitRD package install from DISTRO_EXTRA_RRECOMMENDS to add it explicitly
|
||||
# in our bootfs image (this avoid dependency loops as rootfs depends on bootfs...)
|
||||
DISTRO_EXTRA_RRECOMMENDS_remove = " ${@bb.utils.contains('COMBINED_FEATURES', 'initrd', '${INITRD_PACKAGE}', '', d)} "
|
||||
DISTRO_EXTRA_RRECOMMENDS:remove = " ${@bb.utils.contains('COMBINED_FEATURES', 'initrd', '${INITRD_PACKAGE}', '', d)} "
|
||||
|
||||
# Configure autoresize for any of the 'ext4' storage devices (through InitRD image)
|
||||
MACHINE_FEATURES_append = " ${@bb.utils.contains_any('BOOTDEVICE_LABELS', ['emmc', 'sdcard'], 'autoresize', '', d)} "
|
||||
|
||||
# Use Little Kernel loader to program storage device
|
||||
MACHINE_FEATURES += "kloader"
|
||||
MACHINE_FEATURES:append = " ${@bb.utils.contains_any('BOOTDEVICE_LABELS', ['emmc', 'sdcard'], 'autoresize', '', d)} "
|
||||
|
||||
# Use FIP image for boot loaders
|
||||
MACHINE_FEATURES += "fip"
|
||||
@@ -59,25 +56,25 @@ SERIAL_CONSOLES = "115200;ttySTM0"
|
||||
SERIAL_CONSOLE = "115200 ttySTM0"
|
||||
|
||||
# Don't include kernels in standard images
|
||||
RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
|
||||
RDEPENDS:${KERNEL_PACKAGE_NAME}-base = ""
|
||||
|
||||
# Ship all kernel modules by default
|
||||
MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
|
||||
MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-imagebootfs"
|
||||
|
||||
# Default device tree list supported per board
|
||||
STM32MP_DT_FILES_DK ??= ""
|
||||
STM32MP_DT_FILES_ED ??= ""
|
||||
STM32MP_DT_FILES_EV ??= ""
|
||||
# Set default supported device tree list
|
||||
STM32MP_DEVICETREE_append = " ${STM32MP_DT_FILES_DK} "
|
||||
STM32MP_DEVICETREE_append = " ${STM32MP_DT_FILES_ED} "
|
||||
STM32MP_DEVICETREE_append = " ${STM32MP_DT_FILES_EV} "
|
||||
STM32MP_DEVICETREE:append = " ${STM32MP_DT_FILES_DK} "
|
||||
STM32MP_DEVICETREE:append = " ${STM32MP_DT_FILES_ED} "
|
||||
STM32MP_DEVICETREE:append = " ${STM32MP_DT_FILES_EV} "
|
||||
|
||||
# =========================================================================
|
||||
# Machine specific packages
|
||||
# =========================================================================
|
||||
# Enable Software watchdog when sysvinit
|
||||
MACHINE_EXTRA_RRECOMMENDS_append = " ${@bb.utils.contains('DISTRO_FEATURES','sysvinit',' watchdog ','',d)} "
|
||||
MACHINE_EXTRA_RRECOMMENDS:append = " ${@bb.utils.contains('DISTRO_FEATURES','sysvinit',' watchdog ','',d)} "
|
||||
|
||||
# =========================================================================
|
||||
# Bootloader raw partition configuration : data, label, size (Kbytes)
|
||||
@@ -328,16 +325,16 @@ MULTIUBI_BUILD += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', 's
|
||||
|
||||
# UBI Args for NAND by default on MB1262 (Micron MT29F8G16ABACAH4)
|
||||
# LEB = BLOCK_SIZE - (2 * page size): 256*1024 - (2*4096)
|
||||
MKUBIFS_ARGS_nand_4_256 = "--min-io-size 4096 --leb-size 253952 --max-leb-cnt 4096 --space-fixup"
|
||||
UBINIZE_ARGS_nand_4_256 = "--min-io-size 4096 --peb-size 256KiB"
|
||||
MKUBIFS_ARGS:nand_4_256 = "--min-io-size 4096 --leb-size 253952 --max-leb-cnt 4096 --space-fixup"
|
||||
UBINIZE_ARGS:nand_4_256 = "--min-io-size 4096 --peb-size 256KiB"
|
||||
# Set extra size required for UBIFS volume size (KiB)
|
||||
EXTRA_UBIFS_SIZE_nand_4_256 = "2304"
|
||||
EXTRA_UBIFS_SIZE:nand_4_256 = "2304"
|
||||
# UBI Args for SPI NAND by default on MB1262 (Micron MT29F2G01ABA)
|
||||
# LEB = BLOCK_SIZE - (2 * page size): 128*1024 - (2*2048)
|
||||
MKUBIFS_ARGS_spinand_2_128 = "--min-io-size 2048 --leb-size 126976 --max-leb-cnt 2048 --space-fixup"
|
||||
UBINIZE_ARGS_spinand_2_128 = "--min-io-size 2048 --peb-size 128KiB"
|
||||
MKUBIFS_ARGS:spinand_2_128 = "--min-io-size 2048 --leb-size 126976 --max-leb-cnt 2048 --space-fixup"
|
||||
UBINIZE_ARGS:spinand_2_128 = "--min-io-size 2048 --peb-size 128KiB"
|
||||
# Set extra size required for UBIFS volume size (KiB)
|
||||
EXTRA_UBIFS_SIZE_spinand_2_128 = "1408"
|
||||
EXTRA_UBIFS_SIZE:spinand_2_128 = "1408"
|
||||
|
||||
# Define two empty volumes to manage U-Boot config beginning of multivolume UBIFS
|
||||
STM32MP_MULTIUBI_UENV1_LABEL = "uboot_config"
|
||||
@@ -345,11 +342,11 @@ STM32MP_MULTIUBI_UENV1_SIZE ?= "256"
|
||||
STM32MP_MULTIUBI_UENV2_LABEL = "uboot_config_r"
|
||||
STM32MP_MULTIUBI_UENV2_SIZE ?= "${STM32MP_MULTIUBI_UENV1_SIZE}"
|
||||
|
||||
STM32MP_UBI_VOLUME_nand_4_256_prepend = "\
|
||||
STM32MP_UBI_VOLUME:nand_4_256:prepend = "\
|
||||
${STM32MP_MULTIUBI_UENV1_LABEL}:${STM32MP_MULTIUBI_UENV1_SIZE}:empty \
|
||||
${STM32MP_MULTIUBI_UENV2_LABEL}:${STM32MP_MULTIUBI_UENV2_SIZE}:empty \
|
||||
"
|
||||
STM32MP_UBI_VOLUME_spinand_2_128_prepend = "\
|
||||
STM32MP_UBI_VOLUME:spinand_2_128:prepend = "\
|
||||
${STM32MP_MULTIUBI_UENV1_LABEL}:${STM32MP_MULTIUBI_UENV1_SIZE}:empty \
|
||||
${STM32MP_MULTIUBI_UENV2_LABEL}:${STM32MP_MULTIUBI_UENV2_SIZE}:empty \
|
||||
"
|
||||
@@ -368,10 +365,10 @@ IMAGE_FSTYPES += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', 'nand-4-256 spin
|
||||
# So use IMAGE_NAME_SUFFIX name by removing the '.' and truncing to 16 caracters
|
||||
# - Deactivate metadata_csum and dir_index (hashed b-trees): update not supported
|
||||
# by U-Boot
|
||||
EXTRA_IMAGECMD_ext4 = "-i 4096 -L ${@d.getVar('IMAGE_NAME_SUFFIX').replace('.', '', 1)[:16]} -O ^metadata_csum,^dir_index"
|
||||
EXTRA_IMAGECMD:ext4 = "-i 4096 -L ${@d.getVar('IMAGE_NAME_SUFFIX').replace('.', '', 1)[:16]} -O ^metadata_csum,^dir_index"
|
||||
|
||||
# Allow debug on the platform with gdb and openocd tools
|
||||
EXTRA_IMAGEDEPENDS_append = " \
|
||||
EXTRA_IMAGEDEPENDS:append = " \
|
||||
gdb-cross-${TARGET_ARCH} \
|
||||
openocd-stm32mp-native \
|
||||
stm32wrapper4dbg-native \
|
||||
@@ -392,51 +389,52 @@ ST_TOOLS_FOR_SDK = " \
|
||||
ST_TOOLS_FOR_SDK_PERL = " \
|
||||
nativesdk-perl-module-term-ansicolor \
|
||||
nativesdk-perl-module-encode \
|
||||
nativesdk-perl-module-encode-encoding \
|
||||
nativesdk-perl-module-encode-mime-header \
|
||||
"
|
||||
|
||||
# For some scripts in kernel source code
|
||||
ST_TOOLS_FOR_SDK_PERL_append = " \
|
||||
ST_TOOLS_FOR_SDK_PERL:append = " \
|
||||
nativesdk-perl-module-file-spec-functions \
|
||||
nativesdk-perl-module-integer \
|
||||
"
|
||||
|
||||
ST_TOOLS_FOR_SDK_append = " ${ST_TOOLS_FOR_SDK_PERL} "
|
||||
ST_TOOLS_FOR_SDK:append = " ${ST_TOOLS_FOR_SDK_PERL} "
|
||||
|
||||
# For support of python module for optee-os
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
nativesdk-python3-pyelftools \
|
||||
nativesdk-python3-pycryptodomex \
|
||||
nativesdk-python3-pycrypto \
|
||||
"
|
||||
|
||||
# For support of string convertion (iconv) in SDK
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
nativesdk-glibc-gconv-utf-16 \
|
||||
nativesdk-glibc-gconv-utf-32 \
|
||||
"
|
||||
# For support wayland-scanner in SDK
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
nativesdk-wayland \
|
||||
"
|
||||
|
||||
# For Kernel yaml dependency
|
||||
ST_TOOLS_FOR_SDK_remove = " \
|
||||
ST_TOOLS_FOR_SDK:remove = " \
|
||||
nativesdk-libyaml \
|
||||
nativesdk-libyaml-dev \
|
||||
"
|
||||
|
||||
# For CMSIS-SVD file parser with GDB
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
nativesdk-svd-tools \
|
||||
"
|
||||
|
||||
# For Trusted Application development using OP-TEE TA SDK
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
nativesdk-optee-sdk \
|
||||
"
|
||||
|
||||
# Fip tool
|
||||
ST_TOOLS_FOR_SDK_append = " \
|
||||
ST_TOOLS_FOR_SDK:append = " \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', 'nativesdk-${FIPTOOL_WRAPPER}', '', d)} \
|
||||
"
|
||||
|
||||
@@ -446,28 +444,28 @@ ST_DEPENDENCIES_BUILD_FOR_SDK = " \
|
||||
${@bb.utils.contains('KERNEL_ALT_IMAGETYPE', 'uImage', 'nativesdk-u-boot-mkimage', '', d)} \
|
||||
"
|
||||
# Make sure to append openssl to SDK for kernel-module and scripts build
|
||||
ST_DEPENDENCIES_BUILD_FOR_SDK_append = " nativesdk-openssl-dev "
|
||||
ST_DEPENDENCIES_BUILD_FOR_SDK:append = " nativesdk-openssl-dev "
|
||||
|
||||
# Make sure to append bison to SDK for u-boot build
|
||||
ST_DEPENDENCIES_BUILD_FOR_SDK_append = " \
|
||||
ST_DEPENDENCIES_BUILD_FOR_SDK:append = " \
|
||||
${@bb.utils.contains('EXTRA_IMAGEDEPENDS', 'u-boot-stm32mp', 'nativesdk-bison', '', d)} \
|
||||
"
|
||||
|
||||
# for populate_sdk, we will have all the tools
|
||||
TOOLCHAIN_HOST_TASK_append = " ${ST_TOOLS_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK_append = " ${ST_DEPENDENCIES_BUILD_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK:append = " ${ST_TOOLS_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK:append = " ${ST_DEPENDENCIES_BUILD_FOR_SDK} "
|
||||
# for populate_sdk_ext, the tools are not desired as mandatory tools (aka basic
|
||||
# tools for devtool)
|
||||
TOOLCHAIN_HOST_TASK_remove_task-populate-sdk-ext = " ${ST_TOOLS_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK_remove_task-populate-sdk-ext = " ${ST_DEPENDENCIES_BUILD_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK:remove:task-populate-sdk-ext = " ${ST_TOOLS_FOR_SDK} "
|
||||
TOOLCHAIN_HOST_TASK:remove:task-populate-sdk-ext = " ${ST_DEPENDENCIES_BUILD_FOR_SDK} "
|
||||
# buildtools is used only by populate_sdk_ext
|
||||
# populate_sdk_ext = buildtools + uninative + layer
|
||||
# buildtools: sdk part of esdk (like sdk generated by populate_sdk)
|
||||
# uninative: basic tools for devtool
|
||||
TOOLCHAIN_HOST_TASK_remove_pn-buildtools-tarball = " ${ST_TOOLS_FOR_SDK_PERL} "
|
||||
TOOLCHAIN_HOST_TASK:remove:pn-buildtools-tarball = " ${ST_TOOLS_FOR_SDK_PERL} "
|
||||
|
||||
TOOLCHAIN_TARGET_TASK += " bash-dev libgomp-dev"
|
||||
TOOLCHAIN_TARGET_TASK_remove_pn-buildtools-tarball = " bash-dev libgomp-dev"
|
||||
TOOLCHAIN_TARGET_TASK:remove:pn-buildtools-tarball = " bash-dev libgomp-dev"
|
||||
|
||||
# =========================================================================
|
||||
# Debug trace
|
||||
@@ -518,7 +516,7 @@ EXTRA_IMAGEDEPENDS += "virtual/bootloader"
|
||||
# Define default U-Boot config
|
||||
UBOOT_CONFIG += "${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trusted', 'trusted_stm32mp15', '', d)}"
|
||||
# The 'basic' config is only available for stm32mp1 machines
|
||||
UBOOT_CONFIG_append_stm32mp1common = " basic_stm32mp15 "
|
||||
UBOOT_CONFIG:append:stm32mp1common = " basic_stm32mp15 "
|
||||
|
||||
# Select u-boot binary that needs specific devicetree suffix (from UBOOT_DEVICETREE)
|
||||
# For legacy mode keep the 'u-boot.stm32' but for FIP feature we need both
|
||||
@@ -558,9 +556,9 @@ UBOOT_MTDPART_CHECK ?= "\
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', '${UBOOT_MTDPART_4LEGACY}', d)} \
|
||||
"
|
||||
|
||||
PREFERRED_PROVIDER_u-boot-fw-utils_stm32mp1common = "libubootenv"
|
||||
PREFERRED_PROVIDER_u-boot-fw-utils:stm32mp1common = "libubootenv"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS_append_stm32mp1common = " \
|
||||
MACHINE_EXTRA_RRECOMMENDS:append:stm32mp1common = " \
|
||||
u-boot-fw-config-stm32mp \
|
||||
"
|
||||
|
||||
@@ -631,12 +629,12 @@ FIP_SIGN_SUFFIX ?= "${@bb.utils.contains('FIP_SIGN_ENABLE', '1', '_Signed', '',
|
||||
# =========================================================================
|
||||
# Xserver
|
||||
# =========================================================================
|
||||
XSERVER ?= " \
|
||||
xserver-xorg \
|
||||
xserver-xorg-module-libint10 \
|
||||
xf86-input-evdev \
|
||||
xf86-video-modesetting \
|
||||
"
|
||||
#XSERVER ?= " \
|
||||
# xserver-xorg \
|
||||
# xserver-xorg-module-libint10 \
|
||||
# xf86-input-evdev \
|
||||
# xf86-video-modesetting \
|
||||
#"
|
||||
|
||||
# =========================================================================
|
||||
# Enable deploy of bootloader elf files
|
||||
|
||||
@@ -13,10 +13,10 @@ INITRD_IMAGE ??= ""
|
||||
UBOOT_EXTLINUX_INITRD ?= "${@bb.utils.contains('COMBINED_FEATURES', 'initrd', '/${INITRD_IMAGE}', '', d)}"
|
||||
# Define default SPLASH SCREEN
|
||||
UBOOT_EXTLINUX_SPLASH ?= "${UBOOT_SPLASH_LANDSCAPE_IMAGE}"
|
||||
UBOOT_EXTLINUX_SPLASH_stm32mp15 ?= "${UBOOT_SPLASH_PORTRAIT_IMAGE}"
|
||||
UBOOT_EXTLINUX_SPLASH:stm32mp15 ?= "${UBOOT_SPLASH_PORTRAIT_IMAGE}"
|
||||
|
||||
UBOOT_EXTLINUX_KERNEL_ARGS ?= "rootwait rw"
|
||||
UBOOT_EXTLINUX_KERNEL_ARGS_append += " ${@bb.utils.contains('ST_DEBUG_TRACE', '1', '', '${ST_CMD_LINE_DEBUG_TRACE}', d)} "
|
||||
UBOOT_EXTLINUX_KERNEL_ARGS:append = " ${@bb.utils.contains('ST_DEBUG_TRACE', '1', '', '${ST_CMD_LINE_DEBUG_TRACE}', d)} "
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Configurations
|
||||
@@ -28,28 +28,28 @@ UBOOT_EXTLINUX_TARGETS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', 'ta
|
||||
UBOOT_EXTLINUX_TARGETS += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', [ 'nand-4-256', 'nor-nand-4-256' ], 'target-nand', '', d)}"
|
||||
# Define labels for each target
|
||||
# (mandatory to allow specific var override if needed)
|
||||
UBOOT_EXTLINUX_LABELS_target-sdcard += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS_target-nor += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS_target-emmc += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS_target-nand += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS:target-sdcard += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS:target-nor += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS:target-emmc += "rootfs"
|
||||
UBOOT_EXTLINUX_LABELS:target-nand += "rootfs"
|
||||
# Define specific bootprefix for each target
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES_target-sdcard = "${DEVICE_SDCARD}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES_target-nor = "${DEVICE_NOR}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES_target-emmc = "${DEVICE_EMMC}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES_target-nand = "${DEVICE_NAND}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES:target-sdcard = "${DEVICE:SDCARD}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES:target-nor = "${DEVICE:NOR}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES:target-emmc = "${DEVICE:EMMC}_"
|
||||
UBOOT_EXTLINUX_BOOTPREFIXES:target-nand = "${DEVICE:NAND}_"
|
||||
# Define ROOT overrides for each target
|
||||
UBOOT_EXTLINUX_ROOT_target-nand = "ubi.mtd=UBI rootfstype=ubifs root=ubi0:rootfs"
|
||||
UBOOT_EXTLINUX_ROOT_target-sdcard = "root=PARTUUID=${DEVICE_PARTUUID_ROOTFS_SDCARD}"
|
||||
UBOOT_EXTLINUX_ROOT_target-nor = "root=/dev/mtdblock6"
|
||||
UBOOT_EXTLINUX_ROOT_target-emmc = "root=PARTUUID=${DEVICE_PARTUUID_ROOTFS_EMMC}"
|
||||
UBOOT_EXTLINUX_ROOT:target-nand = "ubi.mtd=UBI rootfstype=ubifs root=ubi0:rootfs"
|
||||
UBOOT_EXTLINUX_ROOT:target-sdcard = "root=PARTUUID=${DEVICE_PARTUUID_ROOTFS:SDCARD}"
|
||||
UBOOT_EXTLINUX_ROOT:target-nor = "root=/dev/mtdblock6"
|
||||
UBOOT_EXTLINUX_ROOT:target-emmc = "root=PARTUUID=${DEVICE_PARTUUID_ROOTFS:EMMC}"
|
||||
# Define INITRD overrides for nand target
|
||||
UBOOT_EXTLINUX_INITRD_target-nand = ""
|
||||
UBOOT_EXTLINUX_INITRD:target-nand = ""
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Configure default labels
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define MENU_DESCRIPTION for rootfs label to default one to force selection
|
||||
UBOOT_EXTLINUX_MENU_DESCRIPTION_rootfs = "OpenSTLinux"
|
||||
UBOOT_EXTLINUX_MENU_DESCRIPTION:rootfs = "OpenSTLinux"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Append specific examples configs
|
||||
@@ -64,15 +64,15 @@ UBOOT_EXTLINUX_MENU_DESCRIPTION_rootfs = "OpenSTLinux"
|
||||
# the 'newlabel1' and 'newlabel2' labels.
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define additional extra targets to consider
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-sdcard += "${STM32MP_DT_FILES_DK}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-sdcard += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-sdcard += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-emmc += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-emmc += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-nand += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-nand += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-nor += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG_target-nor += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-sdcard += "${STM32MP_DT_FILES_DK}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-sdcard += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-sdcard += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-emmc += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-emmc += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-nand += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-nand += "${STM32MP_DT_FILES_EV}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-nor += "${STM32MP_DT_FILES_ED}"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG:target-nor += "${STM32MP_DT_FILES_EV}"
|
||||
# Define extra label configuration
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157c-dk2] += "stm32mp157c-dk2-a7-examples"
|
||||
UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157f-dk2] += "stm32mp157f-dk2-a7-examples"
|
||||
@@ -88,16 +88,16 @@ UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157f-ev1] += "stm32mp157f-ev1-m4-exam
|
||||
# Configure A7 examples labels
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define FDT overrides for new A7 labels
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157c-dk2-a7-examples = "/stm32mp157c-dk2-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157c-ev1-a7-examples = "/stm32mp157c-ev1-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157f-dk2-a7-examples = "/stm32mp157f-dk2-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157f-ev1-a7-examples = "/stm32mp157f-ev1-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157c-dk2-a7-examples = "/stm32mp157c-dk2-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157c-ev1-a7-examples = "/stm32mp157c-ev1-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157f-dk2-a7-examples = "/stm32mp157f-dk2-a7-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157f-ev1-a7-examples = "/stm32mp157f-ev1-a7-examples.dtb"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Configure M4 examples labels
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define FDT overrides for new M4 labels
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157c-dk2-m4-examples = "/stm32mp157c-dk2-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157c-ev1-m4-examples = "/stm32mp157c-ev1-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157f-dk2-m4-examples = "/stm32mp157f-dk2-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT_stm32mp157f-ev1-m4-examples = "/stm32mp157f-ev1-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157c-dk2-m4-examples = "/stm32mp157c-dk2-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157c-ev1-m4-examples = "/stm32mp157c-ev1-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157f-dk2-m4-examples = "/stm32mp157f-dk2-m4-examples.dtb"
|
||||
UBOOT_EXTLINUX_FDT:stm32mp157f-ev1-m4-examples = "/stm32mp157f-ev1-m4-examples.dtb"
|
||||
@@ -57,11 +57,11 @@ WIFI_IMAGE_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'wifi', '${WIFI_L
|
||||
# =========================================================================
|
||||
# Image appends
|
||||
# =========================================================================
|
||||
EXTRA_IMAGEDEPENDS_append = " \
|
||||
EXTRA_IMAGEDEPENDS:append = " \
|
||||
${OPTEE_BINARY_INSTALL} \
|
||||
"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS_append = " \
|
||||
MACHINE_EXTRA_RRECOMMENDS:append = " \
|
||||
${GPU_IMAGE_INSTALL} \
|
||||
${ALSA_IMAGE_INSTALL} \
|
||||
${BLUETOOTH_IMAGE_INSTALL} \
|
||||
|
||||
@@ -6,13 +6,13 @@ FLASHLAYOUT_BOOTSCHEME_LABELS += "deleteall"
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define config labels
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_CONFIG_LABELS_deleteall = "disco eval"
|
||||
FLASHLAYOUT_CONFIG_LABELS:deleteall = "disco eval"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define label types for each config
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_TYPE_LABELS_deleteall_disco = "${STM32MP_DT_FILES_DK}"
|
||||
FLASHLAYOUT_TYPE_LABELS_deleteall_eval = "${STM32MP_DT_FILES_ED} ${STM32MP_DT_FILES_EV}"
|
||||
FLASHLAYOUT_TYPE_LABELS:deleteall:disco = "${STM32MP_DT_FILES_DK}"
|
||||
FLASHLAYOUT_TYPE_LABELS:deleteall:eval = "${STM32MP_DT_FILES_ED} ${STM32MP_DT_FILES_EV}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define partitions to consider for flashlayout file generation
|
||||
@@ -20,29 +20,29 @@ FLASHLAYOUT_TYPE_LABELS_deleteall_eval = "${STM32MP_DT_FILES_ED} ${STM32MP_DT_F
|
||||
# NB: We re-use as much as possible partitions already defined in file
|
||||
# 'st-machine-flashlayout-stm32mp.inc'
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_PARTITION_LABELS_deleteall = "${FLASHLAYOUT_PROGRAMMER_SECTIONS} emmcboot0 emmcboot1 emmcall nandall norall sdcardall spinandall"
|
||||
FLASHLAYOUT_PARTITION_LABELS:deleteall = "${FLASHLAYOUT_PROGRAMMER_SECTIONS} emmcboot0 emmcboot1 emmcall nandall norall sdcardall spinandall"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Partition configuration for each partition label
|
||||
FLASHLAYOUT_PARTITION_ENABLE_deleteall = "PED"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_deleteall_${STM32MP_FSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_deleteall_${STM32MP_SSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:deleteall = "PED"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:deleteall:${STM32MP_FSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:deleteall:${STM32MP_SSBL1_NAME}-boot = "-"
|
||||
|
||||
FLASHLAYOUT_PARTITION_TYPE_emmcall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE_nandall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE_norall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE_sdcardall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE_spinandall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE:emmcall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE:nandall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE:norall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE:sdcardall = "RawImage"
|
||||
FLASHLAYOUT_PARTITION_TYPE:spinandall = "RawImage"
|
||||
|
||||
FLASHLAYOUT_PARTITION_DEVICE_deleteall = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_EMMC}:emmcboot0 emmcboot1 emmcall,${DEVICE_NAND}:nandall,${DEVICE_NOR}:norall,${DEVICE_SDCARD}:sdcardall,${DEVICE_SPINAND}:spinandall"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:deleteall = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:EMMC}:emmcboot0 emmcboot1 emmcall,${DEVICE:NAND}:nandall,${DEVICE:NOR}:norall,${DEVICE:SDCARD}:sdcardall,${DEVICE:SPINAND}:spinandall"
|
||||
|
||||
FLASHLAYOUT_PARTITION_OFFSET_deleteall = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_deleteall_emmcboot0 = "${DEVICE_START_OFFSET_BOOT0_EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_deleteall_emmcboot1 = "${DEVICE_START_OFFSET_BOOT1_EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:deleteall = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:deleteall:emmcboot0 = "${DEVICE_START_OFFSET_BOOT0:EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:deleteall:emmcboot1 = "${DEVICE_START_OFFSET_BOOT1:EMMC}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# The 'deleteall' bootscheme is a trick to generate flashlayout files to clean
|
||||
# all memory devices on board. There are no specific 'deleteall' bootloaders
|
||||
# so we need to manage specific override for FLASHLAYOUT_PROGRAMMER_SECTIONS binaries
|
||||
BOOTSCHEME_REPLACE = "${@'optee' if bb.utils.contains('BOOTSCHEME_LABELS', 'optee', True, False, d) and not bb.utils.contains('BOOTSCHEME_LABELS', 'trusted', True, False, d) else 'trusted'}"
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_${STM32MP_SSBL1_NAME}-boot_append = " deleteall;${BOOTSCHEME_REPLACE}"
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:${STM32MP_SSBL1_NAME}-boot:append = " deleteall;${BOOTSCHEME_REPLACE}"
|
||||
@@ -8,24 +8,24 @@ FLASHLAYOUT_BOOTSCHEME_LABELS += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'tru
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define config labels
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_CONFIG_LABELS_extensible = "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', 'sdcard', 'none', d)}"
|
||||
FLASHLAYOUT_CONFIG_LABELS:extensible = "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', 'sdcard', 'none', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define label types
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_TYPE_LABELS_extensible = "${@d.getVar('STM32MP_DT_FILES_DK') or 'none'}"
|
||||
FLASHLAYOUT_TYPE_LABELS:extensible = "${@d.getVar('STM32MP_DT_FILES_DK') or 'none'}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define partitions to use
|
||||
# NOTE: extensible scheme is ONLY compatible with sdcard and trusted bootscheme
|
||||
# So we only set partition labels for this particular configuration
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_PARTITION_LABELS_extensible = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:extensible = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'sdcard').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'sdcard').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_extensible_remove = "userfs"
|
||||
FLASHLAYOUT_PARTITION_LABELS:extensible:remove = "userfs"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# The 'extensible' bootscheme is a trick to generate flashlayout files without
|
||||
@@ -34,4 +34,4 @@ FLASHLAYOUT_PARTITION_LABELS_extensible_remove = "userfs"
|
||||
# install more applications via 'apt-get'
|
||||
# Make sure to use 'trusted' bootscheme for binary naming instead of 'extensible'
|
||||
# each time it is required
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_extensible_prepend = "extensible;trusted "
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:extensible:prepend = "extensible;trusted "
|
||||
@@ -77,8 +77,8 @@ FLASHLAYOUT_CONFIG_LABELS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand
|
||||
ST_EXAMPLE_IMAGE ??= "0"
|
||||
|
||||
# Remove NAND flashlayout when we are using st-example-image-* as rootfs too big for a NAND device size of 1 GBytes
|
||||
FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'nand-4-256', '', d)}"
|
||||
FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'spinand-2-128', '', d)}"
|
||||
FLASHLAYOUT_CONFIG_LABELS:remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'nand-4-256', '', d)}"
|
||||
FLASHLAYOUT_CONFIG_LABELS:remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'spinand-2-128', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define label types for each config
|
||||
@@ -86,43 +86,43 @@ FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1'
|
||||
# NOTE: We use devicetree to allow proper filtering on supported storage device
|
||||
# -----------------------------------------------------------------------------
|
||||
# Priority var assignment (where <OVERRIDES> are the usual override mechanism):
|
||||
# 1) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<CONFIG>
|
||||
# 3) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_TYPE_LABELS_<CONFIG>_<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_TYPE_LABELS_<CONFIG>
|
||||
# 7) FLASHLAYOUT_TYPE_LABELS_<OVERRIDES>
|
||||
# 1) FLASHLAYOUT_TYPE_LABELS:<BOOTSCHEME>:<CONFIG>:<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_TYPE_LABELS:<BOOTSCHEME>:<CONFIG>
|
||||
# 3) FLASHLAYOUT_TYPE_LABELS:<BOOTSCHEME>:<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_TYPE_LABELS:<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_TYPE_LABELS:<CONFIG>:<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_TYPE_LABELS:<CONFIG>
|
||||
# 7) FLASHLAYOUT_TYPE_LABELS:<OVERRIDES>
|
||||
# 8) FLASHLAYOUT_TYPE_LABELS
|
||||
# -----------------------------------------------------------------------------
|
||||
# EMMC
|
||||
# Set flashlayout file generation to eval board (mother and daughter) only
|
||||
FLASHLAYOUT_TYPE_LABELS_emmc = "${DEVICE_BOARD_ENABLE_EMMC}"
|
||||
FLASHLAYOUT_TYPE_LABELS:emmc = "${DEVICE_BOARD_ENABLE:EMMC}"
|
||||
# NAND
|
||||
# Set flashlayout file generation to eval board only
|
||||
FLASHLAYOUT_TYPE_LABELS_nand-4-256 = "${DEVICE_BOARD_ENABLE_NAND}"
|
||||
FLASHLAYOUT_TYPE_LABELS:nand-4-256 = "${DEVICE_BOARD_ENABLE:NAND}"
|
||||
# NOR
|
||||
# Set flashlayout file generation to eval board only
|
||||
FLASHLAYOUT_TYPE_LABELS_nor = "${DEVICE_BOARD_ENABLE_NOR}"
|
||||
FLASHLAYOUT_TYPE_LABELS_nor-sdcard = "${DEVICE_BOARD_ENABLE_NOR}"
|
||||
FLASHLAYOUT_TYPE_LABELS:nor = "${DEVICE_BOARD_ENABLE:NOR}"
|
||||
FLASHLAYOUT_TYPE_LABELS:nor-sdcard = "${DEVICE_BOARD_ENABLE:NOR}"
|
||||
# SDCARD
|
||||
# Set flashlayout file generation for all boards
|
||||
FLASHLAYOUT_TYPE_LABELS_sdcard = "${DEVICE_BOARD_ENABLE_SDCARD}"
|
||||
FLASHLAYOUT_TYPE_LABELS:sdcard = "${DEVICE_BOARD_ENABLE:SDCARD}"
|
||||
# SPINAND
|
||||
# Set flashlayout file generation for all boards
|
||||
FLASHLAYOUT_TYPE_LABELS_spinand-2-128 = "${DEVICE_BOARD_ENABLE_SPINAND}"
|
||||
FLASHLAYOUT_TYPE_LABELS:spinand-2-128 = "${DEVICE_BOARD_ENABLE:SPINAND}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Define partitions to consider for flashlayout file generation
|
||||
# -----------------------------------------------------------------------------
|
||||
# Priority var assignment (where <OVERRIDES> are the usual override mechanism):
|
||||
# 1) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<CONFIG>
|
||||
# 3) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_PARTITION_LABELS_<CONFIG>_<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_PARTITION_LABELS_<CONFIG>
|
||||
# 7) FLASHLAYOUT_PARTITION_LABELS_<OVERRIDES>
|
||||
# 1) FLASHLAYOUT_PARTITION_LABELS:<BOOTSCHEME>:<CONFIG>:<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_PARTITION_LABELS:<BOOTSCHEME>:<CONFIG>
|
||||
# 3) FLASHLAYOUT_PARTITION_LABELS:<BOOTSCHEME>:<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_PARTITION_LABELS:<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_PARTITION_LABELS:<CONFIG>:<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_PARTITION_LABELS:<CONFIG>
|
||||
# 7) FLASHLAYOUT_PARTITION_LABELS:<OVERRIDES>
|
||||
# 8) FLASHLAYOUT_PARTITION_LABELS
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_PROGRAMMER_SECTIONS ?= "${STM32MP_FSBL1_NAME}-boot ${STM32MP_SSBL1_NAME}-boot"
|
||||
@@ -130,71 +130,71 @@ FLASHLAYOUT_PROGRAMMER_SECTIONS ?= "${STM32MP_FSBL1_NAME}-boot ${STM32MP_SSBL1_N
|
||||
# FLASHLAYOUT_PARTITION_IMAGES is initalized through PARTITIONS_CONFIG within 'flashlayout-stm32mp' class
|
||||
FLASHLAYOUT_PARTITION_IMAGES ?= ""
|
||||
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_emmc = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:emmc = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'emmc').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'emmc').split()]), d)} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'emmc').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_nand-4-256 = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:nand-4-256 = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nand-4-256').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nand-4-256').split()]), d)} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nand-4-256').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_nor = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:nor = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nor').split()]), d)} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_nor-sdcard = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:nor-sdcard = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor-sdcard').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nor-sdcard').split()]), d)} \
|
||||
empty \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor-sdcard').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_sdcard = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:sdcard = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'sdcard').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'sdcard').split()]), d)} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'sdcard').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_optee_spinand-2-128 = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:optee:spinand-2-128 = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'spinand-2-128').split()])} \
|
||||
${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'spinand-2-128').split()]), d)} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'spinand-2-128').split()])} \
|
||||
"
|
||||
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_emmc = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:emmc = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'emmc').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'emmc').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_nand-4-256 = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:nand-4-256 = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nand-4-256').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nand-4-256').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_nor = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:nor = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_nor-sdcard = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:nor-sdcard = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor-sdcard').split()])} \
|
||||
empty \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor-sdcard').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_sdcard = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:sdcard = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'sdcard').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'sdcard').split()])} \
|
||||
"
|
||||
FLASHLAYOUT_PARTITION_LABELS_trusted_spinand-2-128 = "\
|
||||
FLASHLAYOUT_PARTITION_LABELS:trusted:spinand-2-128 = "\
|
||||
${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'spinand-2-128').split()])} \
|
||||
${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'spinand-2-128').split()])} \
|
||||
@@ -205,25 +205,25 @@ FLASHLAYOUT_PARTITION_LABELS_trusted_spinand-2-128 = "\
|
||||
# -----------------------------------------------------------------------------
|
||||
# Priority var assignment (where <OVERRIDES> are the usual override mechanism
|
||||
# with dynamic append of ongoing 'partition name' item):
|
||||
# 1) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<CONFIG>
|
||||
# 3) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_PARTITION_xxx_<CONFIG>_<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_PARTITION_xxx_<CONFIG>
|
||||
# 7) FLASHLAYOUT_PARTITION_xxx_<OVERRIDES>
|
||||
# 1) FLASHLAYOUT_PARTITION_xxx:<BOOTSCHEME>:<CONFIG>:<OVERRIDES>
|
||||
# 2) FLASHLAYOUT_PARTITION_xxx:<BOOTSCHEME>:<CONFIG>
|
||||
# 3) FLASHLAYOUT_PARTITION_xxx:<BOOTSCHEME>:<OVERRIDES>
|
||||
# 4) FLASHLAYOUT_PARTITION_xxx:<BOOTSCHEME>
|
||||
# 5) FLASHLAYOUT_PARTITION_xxx:<CONFIG>:<OVERRIDES>
|
||||
# 6) FLASHLAYOUT_PARTITION_xxx:<CONFIG>
|
||||
# 7) FLASHLAYOUT_PARTITION_xxx:<OVERRIDES>
|
||||
# 8) FLASHLAYOUT_PARTITION_xxx
|
||||
# 9) Default 'FLASHLAYOUT_PARTITION_xxx' to 'none' when not defined
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_PARTITION_ENABLE = "P"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_${STM32MP_FSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_${STM32MP_SSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_empty = "PE"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_nor_${STM32MP_UENV_NAME} = "PDE"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_nor-sdcard_${STM32MP_UENV_NAME} = "PDE"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:${STM32MP_FSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:${STM32MP_SSBL1_NAME}-boot = "-"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:empty = "PE"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:nor:${STM32MP_UENV_NAME} = "PDE"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:nor-sdcard:${STM32MP_UENV_NAME} = "PDE"
|
||||
# Need to make sure to delete partition that contains U-Boot env before update (gpt partitions only)
|
||||
FLASHLAYOUT_PARTITION_ENABLE_sdcard_${STM32MP_SSBL1_NAME} = "PD"
|
||||
FLASHLAYOUT_PARTITION_ENABLE_emmc_${STM32MP_SSBL1_NAME} = "PD"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:sdcard:${STM32MP_SSBL1_NAME} = "PD"
|
||||
FLASHLAYOUT_PARTITION_ENABLE:emmc:${STM32MP_SSBL1_NAME} = "PD"
|
||||
# -----------------------------------------------------------------------------
|
||||
# Partition ID
|
||||
# -----------------------------------------------------------------------------
|
||||
@@ -231,29 +231,29 @@ FLASHLAYOUT_PARTITION_ENABLE_emmc_${STM32MP_SSBL1_NAME} = "PD"
|
||||
# reserved IDs on STM32CubeProgrammer side:
|
||||
# 0x01 for FSBL
|
||||
# 0x03 for SSBL
|
||||
FLASHLAYOUT_PARTITION_ID_${STM32MP_FSBL1_NAME}-boot = "0x01"
|
||||
FLASHLAYOUT_PARTITION_ID_${STM32MP_SSBL1_NAME}-boot = "0x03"
|
||||
FLASHLAYOUT_PARTITION_ID:${STM32MP_FSBL1_NAME}-boot = "0x01"
|
||||
FLASHLAYOUT_PARTITION_ID:${STM32MP_SSBL1_NAME}-boot = "0x03"
|
||||
|
||||
FLASHLAYOUT_PARTITION_TYPE = "Binary"
|
||||
FLASHLAYOUT_PARTITION_TYPE_ubifs = "System"
|
||||
FLASHLAYOUT_PARTITION_TYPE:ubifs = "System"
|
||||
|
||||
FLASHLAYOUT_PARTITION_COPY = "1"
|
||||
|
||||
FLASHLAYOUT_PARTITION_DEVICE_emmc = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_EMMC}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE_nand-4-256 = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_NAND}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE_nor = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_NOR}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE_nor-sdcard = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_NOR}:default,${DEVICE_SDCARD}:${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor-sdcard').split()])}"
|
||||
FLASHLAYOUT_PARTITION_DEVICE_sdcard = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_SDCARD}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE_spinand-2-128 = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE_SPINAND}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:emmc = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:EMMC}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:nand-4-256 = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:NAND}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:nor = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:NOR}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:nor-sdcard = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:NOR}:default,${DEVICE:SDCARD}:${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor-sdcard').split()])}"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:sdcard = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:SDCARD}:default"
|
||||
FLASHLAYOUT_PARTITION_DEVICE:spinand-2-128 = "none:${FLASHLAYOUT_PROGRAMMER_SECTIONS},${DEVICE:SPINAND}:default"
|
||||
|
||||
FLASHLAYOUT_PARTITION_OFFSET_${STM32MP_FSBL1_NAME}-boot = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_${STM32MP_SSBL1_NAME}-boot = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_emmc_${STM32MP_FSBL1_NAME} = "${DEVICE_START_OFFSET_BOOT0_EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_emmc_${STM32MP_FSBL2_NAME} = "${DEVICE_START_OFFSET_BOOT1_EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET_emmc_${STM32MP_SSBL1_NAME} = "${DEVICE_START_OFFSET_EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:${STM32MP_FSBL1_NAME}-boot = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:${STM32MP_SSBL1_NAME}-boot = "0x0"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:emmc:${STM32MP_FSBL1_NAME} = "${DEVICE_START_OFFSET_BOOT0:EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:emmc:${STM32MP_FSBL2_NAME} = "${DEVICE_START_OFFSET_BOOT1:EMMC}"
|
||||
FLASHLAYOUT_PARTITION_OFFSET:emmc:${STM32MP_SSBL1_NAME} = "${DEVICE_START_OFFSET_EMMC}"
|
||||
|
||||
# Size defined in Kbytes
|
||||
FLASHLAYOUT_PARTITION_SIZE_empty = "0"
|
||||
FLASHLAYOUT_PARTITION_SIZE:empty = "0"
|
||||
|
||||
# Set binaries to use for each partition
|
||||
# -----------------------------------------------------------------------------
|
||||
@@ -264,8 +264,8 @@ FLASHLAYOUT_PARTITION_SIZE_empty = "0"
|
||||
# '<TYPE>' (to insert label from FLASHLAYOUT_TYPE_LABELS)
|
||||
# These patterns are processed to expand binary name for each config.
|
||||
# -----------------------------------------------------------------------------
|
||||
FLASHLAYOUT_PARTITION_BIN2LOAD_${STM32MP_FSBL1_NAME}-boot = "${@bb.utils.contains('MACHINE_FEATURES', 'fip', 'arm-trusted-firmware/tf-a-<TYPE>-usb.stm32', 'arm-trusted-firmware/tf-a-<TYPE>-serialboot.stm32', d)}"
|
||||
FLASHLAYOUT_PARTITION_BIN2LOAD_${STM32MP_SSBL1_NAME}-boot = "${STM32MP_SSBL1_DATA}"
|
||||
FLASHLAYOUT_PARTITION_BIN2LOAD:${STM32MP_FSBL1_NAME}-boot = "${@bb.utils.contains('MACHINE_FEATURES', 'fip', 'arm-trusted-firmware/tf-a-<TYPE>-usb.stm32', 'arm-trusted-firmware/tf-a-<TYPE>-serialboot.stm32', d)}"
|
||||
FLASHLAYOUT_PARTITION_BIN2LOAD:${STM32MP_SSBL1_NAME}-boot = "${STM32MP_SSBL1_DATA}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Use the 'FLASHLAYOUT_PARTITION_REPLACE_PATTERNS' var to allow dynamic binary
|
||||
@@ -278,5 +278,5 @@ FLASHLAYOUT_PARTITION_BIN2LOAD_${STM32MP_SSBL1_NAME}-boot = "${STM32MP_SSBL1_DAT
|
||||
# -----------------------------------------------------------------------------
|
||||
# The daughter board does not support Programmer mode, so use eval one
|
||||
# (valid for FLASHLAYOUT_PROGRAMMER_SECTIONS partitions)
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_${STM32MP_FSBL1_NAME}-boot_append = " ed1;ev1"
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_${STM32MP_SSBL1_NAME}-boot_append = " ed1;ev1"
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:${STM32MP_FSBL1_NAME}-boot:append = " ed1;ev1"
|
||||
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:${STM32MP_SSBL1_NAME}-boot:append = " ed1;ev1"
|
||||
@@ -53,8 +53,8 @@ python () {
|
||||
if device_type not in supported_device_types:
|
||||
bb.fatal('Wrong DEVICE_STORAGE configuration: "%s" is not part of supported device type (%s)' % (device_type, supported_device_types))
|
||||
# Configure alias
|
||||
d.setVar('DEVICE_%s' % device_name, device_type)
|
||||
d.setVar('DEVICE_%s' % device_type, device_name)
|
||||
d.setVar('DEVICE:%s' % device_name, device_type)
|
||||
d.setVar('DEVICE:%s' % device_type, device_name)
|
||||
else:
|
||||
bb.fatal('Wrong DEVICE_STORAGE configuration: expecting DEVICE_STORAGE = "<device_name1>:<devie_type1>,<device_name2>:<device_type2>"')
|
||||
}
|
||||
@@ -64,79 +64,79 @@ python () {
|
||||
# Extra space is required to store 'Protective MBR' and 'Primary GPT Header'
|
||||
# Currently the required size is 17 KiB (i.e. 0x4400)
|
||||
# We need to align this size to get the first offset to use
|
||||
DEVICE_START_OFFSET_EMMC ?= "0x00080000"
|
||||
DEVICE_START_OFFSET:EMMC ?= "0x00080000"
|
||||
# 32 Gbit
|
||||
DEVICE_MAX_OFFSET_EMMC ?= "0x100000000"
|
||||
DEVICE_ALIGNMENT_SIZE_EMMC ?= "0x00080000"
|
||||
DEVICE_MAX_OFFSET:EMMC ?= "0x100000000"
|
||||
DEVICE_ALIGNMENT_SIZE:EMMC ?= "0x00080000"
|
||||
|
||||
# Specific to EMMC, there are two boot partitions using specific offset to access
|
||||
DEVICE_START_OFFSET_BOOT0_EMMC ?= "boot1"
|
||||
DEVICE_START_OFFSET_BOOT1_EMMC ?= "boot2"
|
||||
DEVICE_START_OFFSET_BOOT0:EMMC ?= "boot1"
|
||||
DEVICE_START_OFFSET_BOOT1:EMMC ?= "boot2"
|
||||
|
||||
# Configure the rootfs partition uid used in gpt partition table for EMMC
|
||||
DEVICE_PARTUUID_ROOTFS_EMMC ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS_${DEVICE_EMMC}')) or ''}"
|
||||
DEVICE_PARTUUID_ROOTFS:EMMC ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS:${DEVICE:EMMC}')) or ''}"
|
||||
|
||||
# Configure the list of boards that enable EMMC
|
||||
DEVICE_BOARD_ENABLE_EMMC += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE_EMMC += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:EMMC += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:EMMC += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# NAND
|
||||
DEVICE_START_OFFSET_NAND ?= "0x00000000"
|
||||
DEVICE_START_OFFSET:NAND ?= "0x00000000"
|
||||
# 8 Gbit
|
||||
DEVICE_MAX_OFFSET_NAND ?= "0x40000000"
|
||||
DEVICE_ALIGNMENT_SIZE_NAND ?= "0x00040000"
|
||||
DEVICE_MAX_OFFSET:NAND ?= "0x40000000"
|
||||
DEVICE_ALIGNMENT_SIZE:NAND ?= "0x00040000"
|
||||
|
||||
# Configure the list of boards that enable NAND
|
||||
DEVICE_BOARD_ENABLE_NAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE_NAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:NAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:NAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# NOR
|
||||
DEVICE_START_OFFSET_NOR ?= "0x00000000"
|
||||
DEVICE_START_OFFSET:NOR ?= "0x00000000"
|
||||
# 512 Mbit, only 1 NOR is used
|
||||
DEVICE_MAX_OFFSET_NOR ?= "0x04000000"
|
||||
DEVICE_ALIGNMENT_SIZE_NOR ?= "0x00010000"
|
||||
DEVICE_MAX_OFFSET:NOR ?= "0x04000000"
|
||||
DEVICE_ALIGNMENT_SIZE:NOR ?= "0x00010000"
|
||||
|
||||
# Configure the rootfs partition uid used in gpt partition table for NOR
|
||||
DEVICE_PARTUUID_ROOTFS_NOR ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS_${DEVICE_NOR}')) or ''}"
|
||||
DEVICE_PARTUUID_ROOTFS:NOR ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS:${DEVICE_NOR}')) or ''}"
|
||||
|
||||
# Configure the list of boards that enable NOR
|
||||
DEVICE_BOARD_ENABLE_NOR += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard' , '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE_NOR += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor' , '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:NOR += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard' , '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:NOR += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor' , '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# SDCARD
|
||||
# Extra space is required to store 'Protective MBR' and 'Primary GPT Header'
|
||||
# Currently the required size is 17 KiB (i.e. 0x4400)
|
||||
# We need to align this size to get the first offset to use
|
||||
DEVICE_START_OFFSET_SDCARD ?= "0x00004400"
|
||||
DEVICE_START_OFFSET:SDCARD ?= "0x00004400"
|
||||
# No limit for SDCARD
|
||||
DEVICE_MAX_OFFSET_SDCARD ?= "none"
|
||||
DEVICE_ALIGNMENT_SIZE_SDCARD ?= "0x00000200"
|
||||
DEVICE_MAX_OFFSET:SDCARD ?= "none"
|
||||
DEVICE_ALIGNMENT_SIZE:SDCARD ?= "0x00000200"
|
||||
|
||||
# Configure the rootfs partition uid used in gpt partition table for SDCARD
|
||||
DEVICE_PARTUUID_ROOTFS_SDCARD ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS_${DEVICE_SDCARD}')) or ''}"
|
||||
DEVICE_PARTUUID_ROOTFS:SDCARD ?= "${@d.getVar(d.expand('DEVICE_PARTUUID_ROOTFS:${DEVICE:SDCARD}')) or ''}"
|
||||
|
||||
# Configure the list of boards that enable SDCARD
|
||||
DEVICE_BOARD_ENABLE_SDCARD += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', '${STM32MP_DT_FILES_DK}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE_SDCARD += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', [ 'sdcard', 'nor-sdcard', 'nor' ], '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE_SDCARD += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', [ 'sdcard', 'nor-sdcard', 'nor' ], '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:SDCARD += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', '${STM32MP_DT_FILES_DK}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:SDCARD += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', [ 'sdcard', 'nor-sdcard', 'nor' ], '${STM32MP_DT_FILES_ED}', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:SDCARD += "${@bb.utils.contains_any('BOOTDEVICE_LABELS', [ 'sdcard', 'nor-sdcard', 'nor' ], '${STM32MP_DT_FILES_EV}', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# SPI NAND
|
||||
DEVICE_START_OFFSET_SPINAND ?= "0x00000000"
|
||||
DEVICE_START_OFFSET:SPINAND ?= "0x00000000"
|
||||
# 2 Gbit
|
||||
DEVICE_MAX_OFFSET_SPINAND ?= "0x10000000"
|
||||
DEVICE_ALIGNMENT_SIZE_SPINAND ?= "0x00020000"
|
||||
DEVICE_MAX_OFFSET:SPINAND ?= "0x10000000"
|
||||
DEVICE_ALIGNMENT_SIZE:SPINAND ?= "0x00020000"
|
||||
|
||||
# Configure the list of boards that enable SPINAND
|
||||
DEVICE_BOARD_ENABLE_SPINAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', '', '', d)}"
|
||||
DEVICE_BOARD_ENABLE:SPINAND += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', '', '', d)}"
|
||||
|
||||
# -----------------------------------------------------------------------------
|
||||
# Fixed configuration from U-Boot source code
|
||||
# -----------------------------------------------------------------------------
|
||||
DEVICE_PARTUUID_ROOTFS_mmc0 ?= "e91c4e10-16e6-4c0e-bd0e-77becf4a3582"
|
||||
DEVICE_PARTUUID_ROOTFS_mmc1 ?= "491f6117-415d-4f53-88c9-6e0de54deac6"
|
||||
DEVICE_PARTUUID_ROOTFS_mmc2 ?= "fd58f1c7-be0d-4338-8ee9-ad8f050aeb18"
|
||||
DEVICE_PARTUUID_ROOTFS_nor0 ?= ""
|
||||
DEVICE_PARTUUID_ROOTFS:mmc0 ?= "e91c4e10-16e6-4c0e-bd0e-77becf4a3582"
|
||||
DEVICE_PARTUUID_ROOTFS:mmc1 ?= "491f6117-415d-4f53-88c9-6e0de54deac6"
|
||||
DEVICE_PARTUUID_ROOTFS:mmc2 ?= "fd58f1c7-be0d-4338-8ee9-ad8f050aeb18"
|
||||
DEVICE_PARTUUID_ROOTFS:nor0 ?= ""
|
||||
@@ -51,7 +51,7 @@ MACHINE_FEATURES += "${@'gpu' if d.getVar('ACCEPT_EULA_'+d.getVar('MACHINE')) ==
|
||||
MACHINE_FEATURES += "m4copro"
|
||||
MACHINE_FEATURES += "fit"
|
||||
|
||||
MACHINE_FEATURES_remove = "fip"
|
||||
MACHINE_FEATURES:remove = "fip"
|
||||
|
||||
# Bluetooth
|
||||
#BLUETOOTH_LIST += "linux-firmware-bluetooth-bcm4343"
|
||||
|
||||
Reference in new issue
Block a user