Add stm32mp13 machine support

Rename stm32mp1-disco and stm32mp1-eval on stm32mp15-disco and stm32mp15-eval Signed-off-by: Christophe Priouzeau <christophe.priouzeau@foss.st.com> Change-Id: Id28971e6d1fc895e39440b229d9cbe8d5a1af162
2022-06-21 10:18:08 +02:00
1 parent 2a2c5d495a
commit 6c19d25a73
@@ -16,7 +16,12 @@ MACHINEOVERRIDES .= ":stm32mpcommon"
 # =========================================================================
 # SOC
 # =========================================================================
-STM32MP_SOC_NAME = "stm32mp15"
+STM32MP_SOC_NAME = ""
+STM32MP_SOC_NAME:append:stm32mp15common = " stm32mp15 "
+STM32MP_SOC_NAME:append:stm32mp13common = " stm32mp13 "
+# Take care of nativesdk override use case
+STM32MP_SOC_NAME:append:class-nativesdk = " stm32mp15 "
+STM32MP_SOC_NAME:append:class-nativesdk = " stm32mp13 "

 # =========================================================================
 # boot scheme
@@ -34,7 +39,7 @@ BOOTDEVICE_LABELS ??= "emmc nand-4-256 nor-sdcard sdcard"
 # Machine settings
 # =========================================================================
 # Default machine feature
-MACHINE_FEATURES = "usbhost usbgadget alsa screen ext2"
+MACHINE_FEATURES = "usbhost usbgadget alsa screen ext2 pci"
 MACHINE_FEATURES:append = " ${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'optee', '', d)} "
 MACHINE_FEATURES:append = " tpm2 "

@@ -48,7 +53,7 @@ DISTRO_EXTRA_RRECOMMENDS:remove = " ${@bb.utils.contains('COMBINED_FEATURES', 'i
 MACHINE_FEATURES:append = " ${@bb.utils.contains_any('BOOTDEVICE_LABELS',  ['emmc', 'sdcard'], 'autoresize', '', d)} "

 # Use FIP image for boot loaders
-MACHINE_FEATURES += "fip"
+MACHINE_FEATURES:append = " fip"

 # Default serial consoles (TTYs) to enable using getty
 # Before kernel 4.18, serial console are ttyS3 but after is ttySTM0
@@ -514,19 +519,21 @@ ST_CMD_LINE_DEBUG_TRACE ?= "loglevel=1 quiet"
 EXTRA_IMAGEDEPENDS += "virtual/bootloader"

 # Define default U-Boot config
-UBOOT_CONFIG += "${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trusted', 'trusted_stm32mp15', '', d)}"
-# The 'basic' config is only available for stm32mp1 machines
-UBOOT_CONFIG:append:stm32mp1common = " basic_stm32mp15 "
+UBOOT_CONFIG = ""
+
+# STM32mp15
+UBOOT_CONFIG:append:stm32mp15common = " ${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trusted', 'trusted_stm32mp15', '', d)} "
+
+# STM32mp13
+UBOOT_CONFIG:append:stm32mp13common = " ${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trusted', 'trusted_stm32mp13', '', d)} "

 # Select u-boot binary that needs specific devicetree suffix (from UBOOT_DEVICETREE)
-# For legacy mode keep the 'u-boot.stm32' but for FIP feature we need both
 # 'u-boot-nodtb.bin' and 'u-boot.dtb' : prefer 'u-boot.dtb' binary as 'u-boot-nodtb.bin'
 # doesn't need any devicetree suffix (specific case for 'u-boot-nodtb' binary
 # implemented on u-boot-stm32mp recipe)
-BINARY_NAME = "${@bb.utils.contains('MACHINE_FEATURES', 'fip', 'u-boot.dtb', 'u-boot.stm32', d)}"
 # Define u-boot defconfig and binary to use for each UBOOT_CONFIG
-UBOOT_CONFIG[basic_stm32mp15]   = "stm32mp15_basic_defconfig,,u-boot.img"
-UBOOT_CONFIG[trusted_stm32mp15] = "stm32mp15_trusted_defconfig,,${BINARY_NAME}"
+UBOOT_CONFIG[trusted_stm32mp15] = "stm32mp15_defconfig,,u-boot.dtb"
+UBOOT_CONFIG[trusted_stm32mp13] = "stm32mp13_defconfig,,u-boot.dtb"

 # List of U-Boot device tree to use
 UBOOT_DEVICETREE = "${STM32MP_DEVICETREE}"
@@ -539,21 +546,13 @@ UBOOT_SPLASH_LANDSCAPE_IMAGE = "splash_landscape"
 UBOOT_MTDPART_CHECK_ENABLE ?= "${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trusted', d.getVarFlag('UBOOT_CONFIG', 'trusted_stm32mp15').split(',')[0], '', d)}"
 # Set U-Boot MTD partition configurations
 UBOOT_MTDPART_NAND_BOOT    ?= "${@','.join(['%sk(%s)' % (align_size(d, 'NAND', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nand-4-256').split()])}"
-UBOOT_MTDPART_NAND_TEE     ?= "${@','.join(['%sk(%s)' % (align_size(d, 'NAND', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nand-4-256').split()])}"
 UBOOT_MTDPART_NOR_BOOT     ?= "${@','.join(['%sk(%s)' % (align_size(d, 'NOR', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor-sdcard').split()])}"
-UBOOT_MTDPART_NOR_TEE      ?= "${@','.join(['%sk(%s)' % (align_size(d, 'NOR', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nor-sdcard').split()])}"
 UBOOT_MTDPART_SPINAND_BOOT ?= "${@','.join(['%sk(%s)' % (align_size(d, 'SPINAND', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'spinand-2-128').split()])}"
-UBOOT_MTDPART_SPINAND_TEE  ?= "${@','.join(['%sk(%s)' % (align_size(d, 'SPINAND', l.split(',')[2], l.split(',')[4]), l.split(',')[1]) for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'spinand-2-128').split()])}"
-
-UBOOT_MTDPART_4LEGACY += "${@'CONFIG_MTDPARTS_NAND0_TEE=${UBOOT_MTDPART_NAND_TEE}' if bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', True, False, d) and bb.utils.contains('BOOTSCHEME_LABELS', 'optee', True, False, d) else ''}"
-UBOOT_MTDPART_4LEGACY += "${@'CONFIG_MTDPARTS_NOR0_TEE=${UBOOT_MTDPART_NOR_TEE}' if bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard', True, False, d) and bb.utils.contains('BOOTSCHEME_LABELS', 'optee', True, False, d) else ''}"
-UBOOT_MTDPART_4LEGACY += "${@'CONFIG_MTDPARTS_SPINAND0_TEE=${UBOOT_MTDPART_SPINAND_TEE}' if bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', True, False, d) and bb.utils.contains('BOOTSCHEME_LABELS', 'optee', True, False, d) else ''}"

 UBOOT_MTDPART_CHECK ?= "\
    ${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', 'CONFIG_MTDPARTS_NAND0_BOOT=${UBOOT_MTDPART_NAND_BOOT}', '', d)} \
    ${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard', 'CONFIG_MTDPARTS_NOR0_BOOT=${UBOOT_MTDPART_NOR_BOOT}', '', d)} \
    ${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', 'CONFIG_MTDPARTS_SPINAND0_BOOT=${UBOOT_MTDPART_SPINAND_BOOT}', '', d)} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', '${UBOOT_MTDPART_4LEGACY}', d)} \
    "

 PREFERRED_PROVIDER_u-boot-fw-utils:stm32mp1common = "libubootenv"
@@ -573,16 +572,14 @@ EXTRA_IMAGEDEPENDS += "${@bb.utils.contains_any('BOOTSCHEME_LABELS', 'optee trus
 TF_A_CONFIG += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'optee', '', d)}"
 TF_A_CONFIG += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'trusted', 'trusted', '', d)}"
 # Manage specific config settings
-TF_A_CONFIG_4LEGACY += "serialboot"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', 'emmc', '', d)}"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', 'nand', '', d)}"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard', 'nor', '', d)}"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', 'sdcard', '', d)}"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', 'spinand', '', d)}"
-TF_A_CONFIG_4FIP += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor', 'nor', '', d)}"
-TF_A_CONFIG_4FIP += "uart"
-TF_A_CONFIG_4FIP += "usb"
-TF_A_CONFIG += "${@bb.utils.contains('MACHINE_FEATURES', 'fip', '${TF_A_CONFIG_4FIP}', '${TF_A_CONFIG_4LEGACY}', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', 'emmc', '', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', 'nand', '', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard', 'nor', '', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', 'sdcard', '', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'spinand-2-128', 'spinand', '', d)}"
+TF_A_CONFIG += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor', 'nor', '', d)}"
+TF_A_CONFIG += "uart"
+TF_A_CONFIG += "usb"

 # Append SSP config to TF_A_CONFIG
 TF_A_SSP_ENABLE ?= "0"
@@ -617,7 +614,7 @@ FIP_CONFIG[trusted] ?= "tfa,${FIP_DEVICETREE_TRUSTED}"

 # List of device tree to use for fip binary creation
 FIP_DEVICETREE_OPTEE   ?= "${STM32MP_DEVICETREE}"
-FIP_DEVICETREE_TRUSTED ?= "${STM32MP_DEVICETREE}"
+FIP_DEVICETREE_TRUSTED ?= "${@' '.join(d for d in '${STM32MP_DEVICETREE}'.split() if 'stm32mp15' in d)}"

 # Define fiptool wrapper name
 FIPTOOL_WRAPPER ?= "fiptool-stm32mp"
@@ -14,6 +14,7 @@ UBOOT_EXTLINUX_INITRD ?= "${@bb.utils.contains('COMBINED_FEATURES', 'initrd', '/
 # Define default SPLASH SCREEN
 UBOOT_EXTLINUX_SPLASH ?= "${UBOOT_SPLASH_LANDSCAPE_IMAGE}"
 UBOOT_EXTLINUX_SPLASH:stm32mp15 ?= "${UBOOT_SPLASH_PORTRAIT_IMAGE}"
+UBOOT_EXTLINUX_SPLASH:stm32mp13 ?= "${UBOOT_SPLASH_LANDSCAPE_IMAGE}"

 UBOOT_EXTLINUX_KERNEL_ARGS ?= "rootwait rw"
 UBOOT_EXTLINUX_KERNEL_ARGS:append = " ${@bb.utils.contains('ST_DEBUG_TRACE', '1', '', '${ST_CMD_LINE_DEBUG_TRACE}', d)} "
@@ -84,6 +85,8 @@ UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157c-ev1] += "stm32mp157c-ev1-m4-exam
 UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157f-dk2] += "stm32mp157f-dk2-m4-examples"
 UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp157f-ev1] += "stm32mp157f-ev1-m4-examples"

+UBOOT_EXTLINUX_TARGETS_EXTRA_CONFIG[stm32mp135f-dk] += "stm32mp135f-dk-a7-examples"
+
 # -----------------------------------------------------------------------------
 # Configure A7 examples labels
 # -----------------------------------------------------------------------------
@@ -93,6 +96,8 @@ UBOOT_EXTLINUX_FDT:stm32mp157c-ev1-a7-examples = "/stm32mp157c-ev1-a7-examples.d
 UBOOT_EXTLINUX_FDT:stm32mp157f-dk2-a7-examples = "/stm32mp157f-dk2-a7-examples.dtb"
 UBOOT_EXTLINUX_FDT:stm32mp157f-ev1-a7-examples = "/stm32mp157f-ev1-a7-examples.dtb"

+UBOOT_EXTLINUX_FDT:stm32mp135f-dk-a7-examples = "/stm32mp135f-dk-a7-examples.dtb"
+
 # -----------------------------------------------------------------------------
 # Configure M4 examples labels
 # -----------------------------------------------------------------------------
@@ -9,6 +9,7 @@ include conf/machine/include/gpu_vivante.inc
 # please add "gpu" to MACHINE_FEATURES in machine conf file
 GPU_LIST ?= "\
    gcnano-driver-stm32mp \
+    ${GPU_USERLAND_LIBRARIES_INSTALL} \
    "
 GPU_IMAGE_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'gpu', '${GPU_LIST}', '', d)} "

@@ -48,12 +49,26 @@ OPTEE_BINARY ?= "\
    "
 OPTEE_BINARY_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '${OPTEE_BINARY}', '', d)} "

+# =========================================================================
+# pci
+# =========================================================================
+PCI_LIST ?= ""
+PCI_IMAGE_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'pci', '${PCI_LIST}', '', d)} "
+
 # =========================================================================
 # wifi
 # =========================================================================
 WIFI_LIST ?= ""
 WIFI_IMAGE_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'wifi', '${WIFI_LIST}', '', d)} "

+# =========================================================================
+# g0
+# =========================================================================
+G0_LIST ?= "\
+    stm32mp-g0 \
+    "
+G0_IMAGE_INSTALL = "${@bb.utils.contains('MACHINE_FEATURES', 'usbg0', '${G0_LIST}', '', d)} "
+
 # =========================================================================
 # Image appends
 # =========================================================================
@@ -67,5 +82,7 @@ MACHINE_EXTRA_RRECOMMENDS:append = " \
    ${BLUETOOTH_IMAGE_INSTALL}  \
    ${M4COPRO_IMAGE_INSTALL}    \
    ${OPTEE_IMAGE_INSTALL}      \
+    ${PCI_IMAGE_INSTALL}        \
    ${WIFI_IMAGE_INSTALL}       \
+    ${G0_IMAGE_INSTALL}         \
    "
@@ -2,8 +2,8 @@

 # Add specific scheme to provide flashlayout that will make rootfs extensible to
 # remaining device free space
-#   NOTE: this scheme is ONLY compatible with disco board and trusted bootscheme
-FLASHLAYOUT_BOOTSCHEME_LABELS += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'trusted', 'extensible', '', d)}"
+#   NOTE: this scheme is ONLY compatible with disco board and optee bootscheme
+FLASHLAYOUT_BOOTSCHEME_LABELS += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'extensible', '', d)}"

 # -----------------------------------------------------------------------------
 # Define config labels
@@ -17,7 +17,7 @@ FLASHLAYOUT_TYPE_LABELS:extensible = "${@d.getVar('STM32MP_DT_FILES_DK') or 'non

 # -----------------------------------------------------------------------------
 # Define partitions to use
-#   NOTE: extensible scheme is ONLY compatible with sdcard and trusted bootscheme
+#   NOTE: extensible scheme is ONLY compatible with sdcard and optee bootscheme
 #   So we only set partition labels for this particular configuration
 # -----------------------------------------------------------------------------
 FLASHLAYOUT_PARTITION_LABELS:extensible = "\
@@ -29,9 +29,9 @@ FLASHLAYOUT_PARTITION_LABELS:extensible:remove = "userfs"

 # -----------------------------------------------------------------------------
 # The 'extensible' bootscheme is a trick to generate flashlayout files without
-# userfs partition for trusted bootscheme ONLY. So rootfs partition will be
+# userfs partition for optee bootscheme ONLY. So rootfs partition will be
 # extended up to the end of memory device, leaving plenty of space for user to
 # install more applications via 'apt-get'
-# Make sure to use 'trusted' bootscheme for binary naming instead of 'extensible'
+# Make sure to use 'optee' bootscheme for binary naming instead of 'extensible'
 # each time it is required
-FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:extensible:prepend = "extensible;trusted "
+FLASHLAYOUT_PARTITION_REPLACE_PATTERNS:extensible:prepend = "extensible;optee "
@@ -98,19 +98,25 @@ FLASHLAYOUT_CONFIG_LABELS:remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1'
 # EMMC
 # Set flashlayout file generation to eval board (mother and daughter) only
 FLASHLAYOUT_TYPE_LABELS:emmc = "${DEVICE_BOARD_ENABLE:EMMC}"
+FLASHLAYOUT_TYPE_LABELS:trusted:emmc = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:EMMC}'.split() if 'stm32mp15' in d)}"
 # NAND
 # Set flashlayout file generation to eval board only
 FLASHLAYOUT_TYPE_LABELS:nand-4-256 = "${DEVICE_BOARD_ENABLE:NAND}"
+FLASHLAYOUT_TYPE_LABELS:trusted:nand-4-256 = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:NAND}'.split() if 'stm32mp15' in d)}"
 # NOR
 # Set flashlayout file generation to eval board only
 FLASHLAYOUT_TYPE_LABELS:nor = "${DEVICE_BOARD_ENABLE:NOR}"
+FLASHLAYOUT_TYPE_LABELS:trusted:nor = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:NOR}'.split() if 'stm32mp15' in d)}"
 FLASHLAYOUT_TYPE_LABELS:nor-sdcard = "${DEVICE_BOARD_ENABLE:NOR}"
+FLASHLAYOUT_TYPE_LABELS:trusted:nor-sdcard = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:NOR}'.split() if 'stm32mp15' in d)}"
 # SDCARD
 # Set flashlayout file generation for all boards
 FLASHLAYOUT_TYPE_LABELS:sdcard = "${DEVICE_BOARD_ENABLE:SDCARD}"
+FLASHLAYOUT_TYPE_LABELS:trusted:sdcard = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:SDCARD}'.split() if 'stm32mp15' in d)}"
 # SPINAND
 # Set flashlayout file generation for all boards
 FLASHLAYOUT_TYPE_LABELS:spinand-2-128 = "${DEVICE_BOARD_ENABLE:SPINAND}"
+FLASHLAYOUT_TYPE_LABELS:trusted:spinand-2-128 = "${@' '.join(d for d in '${DEVICE_BOARD_ENABLE:SPINAND}'.split() if 'stm32mp15' in d)}"

 # -----------------------------------------------------------------------------
 # Define partitions to consider for flashlayout file generation
@@ -133,38 +139,32 @@ FLASHLAYOUT_PARTITION_IMAGES ?= ""
 FLASHLAYOUT_PARTITION_LABELS:optee:emmc = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'emmc').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'emmc').split()]), d)} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'emmc').split()])} \
    "
 FLASHLAYOUT_PARTITION_LABELS:optee:nand-4-256 = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nand-4-256').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nand-4-256').split()]), d)} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nand-4-256').split()])} \
    "
 FLASHLAYOUT_PARTITION_LABELS:optee:nor = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nor').split()]), d)} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor').split()])} \
    "
 FLASHLAYOUT_PARTITION_LABELS:optee:nor-sdcard = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'nor-sdcard').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'nor-sdcard').split()]), d)} \
    empty \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'nor-sdcard').split()])} \
    "
 FLASHLAYOUT_PARTITION_LABELS:optee:sdcard  = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'sdcard').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'sdcard').split()]), d)} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'sdcard').split()])} \
    "
 FLASHLAYOUT_PARTITION_LABELS:optee:spinand-2-128 = "\
    ${FLASHLAYOUT_PROGRAMMER_SECTIONS} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_BOOTLOADER_CONFIG', 'spinand-2-128').split()])} \
-    ${@bb.utils.contains('MACHINE_FEATURES', 'fip', '', ' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_OPTEE_CONFIG', 'spinand-2-128').split()]), d)} \
    ${@' '.join(['%s' % l.split(',')[1] for l in d.getVarFlag('PARTITIONS_CONFIG', 'spinand-2-128').split()])} \
    "

@@ -9,6 +9,7 @@ include conf/machine/include/st-machine-providers-stm32mp.inc
 # Define specific familly common machine name
 MACHINEOVERRIDES .= ":stm32mp1common"
 MACHINEOVERRIDES .= ":stm32mp15common"
+MACHINEOVERRIDES .= ":stm32mp13common"

 # =========================================================================
 # Chip architecture
@@ -40,6 +41,8 @@ STM32MP_DT_FILES_DK += "stm32mp157c-dk2 stm32mp157f-dk2"
 STM32MP_DT_FILES_ED += "stm32mp157c-ed1 stm32mp157f-ed1"
 STM32MP_DT_FILES_EV += "stm32mp157a-ev1 stm32mp157c-ev1 stm32mp157d-ev1 stm32mp157f-ev1"

+STM32MP_DT_FILES_DK += "stm32mp135d-dk stm32mp135f-dk"
+
 # =========================================================================
 # Machine features
 # =========================================================================
@@ -49,6 +52,7 @@ MACHINE_FEATURES += "bluetooth"
 MACHINE_FEATURES += "wifi"
 MACHINE_FEATURES += "${@'gpu' if d.getVar('ACCEPT_EULA_'+d.getVar('MACHINE')) == '1' else ''}"
 MACHINE_FEATURES += "m4copro"
+MACHINE_FEATURES += "usbg0"

 # Bluetooth
 BLUETOOTH_LIST += "linux-firmware-bluetooth-bcm4343"
@@ -67,6 +71,9 @@ LINUX_A7_EXAMPLES_DT += "stm32mp157c-ev1-a7-examples"
 LINUX_A7_EXAMPLES_DT += "stm32mp157f-dk2-a7-examples"
 LINUX_A7_EXAMPLES_DT += "stm32mp157f-ev1-a7-examples"

+LINUX_A7_EXAMPLES_DT += "stm32mp135f-dk-a7-examples"
+LINUX_A7_EXAMPLES_DT += "stm32mp135d-dk-a7-examples"
+
 # =========================================================================
 # M4 copro
 # =========================================================================
@@ -0,0 +1,79 @@
+#@TYPE: Machine
+#@NAME: stm32mp1-disco
+#@DESCRIPTION: [EXAMPLE] STM32MP135F-DK board ONLY with Optee boot and SDcard support
+#@NEEDED_BSPLAYERS: layers/meta-openembedded/meta-oe layers/meta-openembedded/meta-python
+
+include conf/machine/include/st-machine-common-stm32mp.inc
+include conf/machine/include/st-machine-providers-stm32mp.inc
+
+# Define specific familly common machine name
+MACHINEOVERRIDES .= ":stm32mp1common:stm32mp13common"
+
+# =========================================================================
+# Chip architecture
+# =========================================================================
+DEFAULTTUNE = "cortexa7thf-neon-vfpv4"
+include conf/machine/include/arm/armv7a/tune-cortexa7.inc
+
+# =========================================================================
+# boot scheme
+# =========================================================================
+BOOTSCHEME_LABELS += "optee"
+
+# =========================================================================
+# boot device
+# =========================================================================
+# Define the boot device supported
+#BOOTDEVICE_LABELS += "emmc"
+#BOOTDEVICE_LABELS += "nand-4-256"
+#BOOTDEVICE_LABELS += "nor-sdcard"
+BOOTDEVICE_LABELS += "sdcard"
+
+# =========================================================================
+# Machine settings
+# =========================================================================
+# Define list of devicetree per board
+STM32MP_DT_FILES_DK += "stm32mp135d-dk"
+STM32MP_DT_FILES_DK += "stm32mp135f-dk"
+
+# =========================================================================
+# Machine features
+# =========================================================================
+MACHINE_FEATURES += "splashscreen"
+MACHINE_FEATURES += "watchdog"
+MACHINE_FEATURES += "bluetooth"
+MACHINE_FEATURES += "wifi"
+MACHINE_FEATURES += "nosmp"
+MACHINE_FEATURES += "usbg0"
+
+# Bluetooth
+BLUETOOTH_LIST += "linux-firmware-bluetooth-bcm4343"
+# Wifi
+WIFI_LIST += "linux-firmware-bcm43430"
+
+# =========================================================================
+# Kernel
+# =========================================================================
+
+# Define the devicetree for Linux A7 examples
+LINUX_A7_EXAMPLES_DT += "stm32mp135f-dk-a7-examples"
+LINUX_A7_EXAMPLES_DT += "stm32mp135d-dk-a7-examples"
+
+
+# =========================================================================
+# WIC for sdcard raw image
+# =========================================================================
+WIC_CREATE_EXTRA_ARGS = "--no-fstab-update"
+WKS_FILE_DEPENDS ?= " \
+    virtual/bootloader \
+    virtual/trusted-firmware-a \
+    ${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', 'virtual/optee-os', '', d)} \
+    st-image-bootfs \
+    ${@bb.utils.contains('ST_VENDORFS','1','st-image-vendorfs', '', d)} \
+    st-image-userfs \
+"
+OPTEE_WIC_FILE = "${@bb.utils.contains('ST_VENDORFS','1','sdcard-stm32mp135f-dk-optee-vendorfs-1GB.wks.in','sdcard-stm32mp135f-dk-optee-1GB.wks.in',d)}"
+
+# for generated a WIC file, please uncomment the 2 following lines or add them to local.conf
+#WKS_IMAGE_FSTYPES += "wic wic.bz2 wic.bmap"
+#WKS_FILE += "${OPTEE_WIC_FILE}"
@@ -1,6 +1,6 @@
 #@TYPE: Machine
 #@NAME: stm32mp15-disco
-#@DESCRIPTION: [EXAMPLE] STM32MP157C-DK2 board ONLY with Trusted boot and SDcard support
+#@DESCRIPTION: [EXAMPLE] STM32MP157C-DK2 board ONLY with Optee boot and SDcard support
 #@NEEDED_BSPLAYERS: layers/meta-openembedded/meta-oe layers/meta-openembedded/meta-python

 include conf/machine/include/st-machine-common-stm32mp.inc
@@ -18,8 +18,8 @@ include conf/machine/include/arm/armv7a/tune-cortexa7.inc
 # =========================================================================
 # boot scheme
 # =========================================================================
-BOOTSCHEME_LABELS += "trusted"
-#BOOTSCHEME_LABELS += "optee"
+#BOOTSCHEME_LABELS += "trusted"
+BOOTSCHEME_LABELS += "optee"

 # =========================================================================
 # boot device
@@ -36,7 +36,7 @@ BOOTDEVICE_LABELS += "sdcard"
 # Define list of devicetree per board
 #STM32MP_DT_FILES_DK += "stm32mp157a-dk1 stm32mp157d-dk1"
 #STM32MP_DT_FILES_DK += "stm32mp157c-dk2 stm32mp157f-dk2"
-STM32MP_DT_FILES_DK += "stm32mp157c-dk2"
+STM32MP_DT_FILES_DK += "stm32mp157f-dk2"
 #STM32MP_DT_FILES_ED += "stm32mp157c-ed1 stm32mp157f-ed1"
 #STM32MP_DT_FILES_EV += "stm32mp157a-ev1 stm32mp157c-ev1 stm32mp157d-ev1 stm32mp157f-ev1"

@@ -102,4 +102,4 @@ OPTEE_WIC_FILE = "${@bb.utils.contains('ST_VENDORFS','1','sdcard-stm32mp157c-dk2

 # for generated a WIC file, please uncomment the 2 following lines or add them to local.conf
 #WKS_IMAGE_FSTYPES += "wic wic.bz2 wic.bmap"
-#WKS_FILE += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', '${OPTEE_WIC_FILE}', '${TRUSTED_WIC_FILE}', d)}"
+#WKS_FILE += "${@bb.utils.contains('BOOTSCHEME_LABELS', 'optee', '${OPTEE_WIC_FILE}', '${TRUSTED_WIC_FILE}', d)}"
@@ -38,7 +38,7 @@ BOOTDEVICE_LABELS += "sdcard"
 #STM32MP_DT_FILES_DK += "stm32mp157c-dk2 stm32mp157f-dk2"
 #STM32MP_DT_FILES_ED += "stm32mp157c-ed1 stm32mp157f-ed1"
 #STM32MP_DT_FILES_EV += "stm32mp157a-ev1 stm32mp157c-ev1 stm32mp157d-ev1 stm32mp157f-ev1"
-STM32MP_DT_FILES_EV += "stm32mp157c-ev1"
+STM32MP_DT_FILES_EV += "stm32mp157f-ev1"

 # =========================================================================
 # Machine features
@@ -51,7 +51,6 @@ MACHINE_FEATURES += "${@'gpu' if d.getVar('ACCEPT_EULA_'+d.getVar('MACHINE')) ==
 MACHINE_FEATURES += "m4copro"
 MACHINE_FEATURES += "fit"

-MACHINE_FEATURES:remove = "fip"

 # Bluetooth
 #BLUETOOTH_LIST += "linux-firmware-bluetooth-bcm4343"
@@ -104,4 +103,20 @@ TRUSTED_WIC_FILE = "${@bb.utils.contains('ST_VENDORFS','1','sdcard-stm32mp157c-e

 # for generated a WIC file, please uncomment the 2 following lines or add them to local.conf
 #WKS_IMAGE_FSTYPES += "wic wic.bz2 wic.bmap"
-#WKS_FILE += "${TRUSTED_WIC_FILE}"
+#WKS_FILE += "${TRUSTED_WIC_FILE}"
+
+# ---------------------------------
+#  Usage of FIT Image signed
+# ---------------------------------
+# Need to have MACHINE_FEATURES += "fit"
+# Need to uncomment the follwing variable
+# NOTE: you can specify another directlry to keep same key at each new compilation (UBOOT_SIGN_KEYDIR)
+
+# keys name in keydir (eg. "ubootfit.crt", "ubootfit.key")
+#UBOOT_SIGN_KEYNAME = "ubootfit"
+#UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
+#UBOOT_SIGN_ENABLE = "1"
+#UBOOT_SIGN_KEYDIR = "${DEPLOY_DIR_IMAGE}"
+
+#FIT_GENERATE_KEYS = "1"
+