TF-A-STM32MP: update to v2.0.0 (v2.2-stm32mp-r1)

Change-Id: If6d1e5b3b9fdfc81e8fe77ca2a338b9b124f5209

recipes-bsp/trusted-firmware-a/tf-a-stm32mp/README.HOW_TO.txt

@@ -16,17 +16,17 @@ For tf-a build you need to install:
     Fedora: sudo yum install git
 
 If you have never configured you git configuration:
-    $> git config --global user.name "your_name"
-    $> git config --global user.email "your_email@example.com"
+    $ git config --global user.name "your_name"
+    $ git config --global user.email "your_email@example.com"
 
 2. Initialise cross-compilation via SDK:
 ---------------------------------------
 Source SDK environment:
-    $> source <path to SDK>/environment-setup-cortexa7t2hf-neon-vfpv4-openstlinux_weston-linux-gnueabi
+    $ source <path to SDK>/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi
 
 To verify if your cross-compilation environment have put in place:
-    $> set | grep CROSS
-    CROSS_COMPILE=arm-openstlinux_weston-linux-gnueabi-
+    $ set | grep CROSS
+    CROSS_COMPILE=arm-ostl-linux-gnueabi-
 
 Warning: the environment are valid only on the shell session where you have
 sourced the sdk environment.
@@ -35,48 +35,46 @@ sourced the sdk environment.
 ------------------------
 If you have the tarball and the list of patch then you must extract the tarball
 and apply the patch.
-    $> tar xfz <tf-a source>.tar.gz
-    or
-    $> tar xfj <tf-a source>.tar.bz2
-    or
-    $> tar xfJ <tf-a source>.tar.xz
+    $> tar xfz ##BP##-##PR##.tar.gz
 A new directory containing tf-a standard source code will be created, go into it:
-    $> cd <directory to tf-a source code>
+    $> cd ##BP##
 
 NB: if there is no git management on source code and you would like to have a
 git management on the code see section 4 [Management of tf-a source code]
     if there is some patch, please apply it on source code
-    $> for p in `ls -1 <path to patch>/*.patch`; do patch -p1 < $p; done
+    $> for p in `ls -1 ../*.patch`; do patch -p1 < $p; done
 
 4. Management of tf-a source code:
 -----------------------------------
 If you like to have a better management of change made on tf-a source, you
 can use git:
-    $> cd <directory to tf-a source code>
-    $> test -d .git || git init . && git add . && git commit -m "tf-a source code" && git gc
-    $> git checkout -b WORKING
-    $> for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
+    $ cd <directory to tf-a source code>
+    $ test -d .git || git init . && git add . && git commit -m "tf-a source code" && git gc
+    $ git checkout -b WORKING
+    $ for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
 
 NB: you can use directly the source from the community:
     URL: git://github.com/ARM-software/arm-trusted-firmware.git
     Branch: ##GIT_BRANCH##
     Revision: ##GIT_SRCREV##
 
-    $> git clone git://github.com/ARM-software/arm-trusted-firmware.git -b ##GIT_BRANCH##
-    $> cd <directory to tf-a source code>
-    $> git checkout -b WORKING ##GIT_SRCREV##
-    $> for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
+    $ git clone git://github.com/ARM-software/arm-trusted-firmware.git -b ##GIT_BRANCH##
+    $ cd <directory to tf-a source code>
+    $ git checkout -b WORKING ##GIT_SRCREV##
+    $ for p in `ls -1 <path to patch>/*.patch`; do git am $p; done
 
 5. Build tf-a source code:
 --------------------------------
 To compile tf-a source code
-    $> cd <directory to tf-a source code>
     $> make -f $PWD/../Makefile.sdk all
 or for a specific config :
-    $> make -f $PWD/../Makefile.sdk TFA_DEVICETREE=stm32mp157c-ev1 TF_A_CONFIG=trusted ELF_DEBUG_ENABLE='1' all
+    $ make -f $PWD/../Makefile.sdk TFA_DEVICETREE=stm32mp157c-ev1 TF_A_CONFIG=trusted ELF_DEBUG_ENABLE='1' all
 
 NB: TFA_DEVICETREE flag must be set to switch to correct board configuration.
 
+Files generated should be as follow:
+ #> ../build/*/tf-a-*.stm32
+
 6. Update software on board:
 ----------------------------
 6.1. partitioning of binaries:
@@ -90,11 +88,11 @@ Copy the binary (tf-a-*.stm32) on the dedicated partition, on SDCARD/USB disk
 the partition "fsbl1" are the partition 1:
  - SDCARD: /dev/mmcblkXp1 (where X is the instance number)
  - SDCARD via USB reader: /dev/sdX1 (where X is the instance number)
-    $> dd if=<tf-a binary> of=/dev/<device partition> bs=1M conv=fdatasync
+    $ dd if=<tf-a binary> of=/dev/<device partition> bs=1M conv=fdatasync
 
 FAQ: to found the partition associated to a specific label, just plug the
 SDCARD/USB disk on your PC and call the following command:
-    $> ls -l /dev/disk/by-partlabel/
+    $ ls -l /dev/disk/by-partlabel/
 total 0
 lrwxrwxrwx 1 root root 10 Jan 17 17:38 bootfs -> ../../mmcblk0p4
 lrwxrwxrwx 1 root root 10 Jan 17 17:38 fsbl1 -> ../../mmcblk0p1     ➔ FSBL (TF-A)
@@ -117,4 +115,4 @@ lrwxrwxrwx 1 root root 10 Jan 17 17:38 userfs -> ../../mmcblk0p6
 For SDCARD:      ums 0 mmc 0
 For USB disk:    ums 0 usb 0
 
-* Follow section 6.2 to put tf-a-*.stm32 on SDCARD/USB disk
+* Follow section 6.2 to put tf-a-*.stm32 on SDCARD/USB disk