U-BOOT-STM32MP-EXTLINUX: update for v2.0.0

Change-Id: Iae892ccf630ff290ee337bead4d36e753e24db15

recipes-bsp/u-boot/u-boot-stm32mp-extlinux.bb

@@ -8,7 +8,7 @@ PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 SRC_URI = "file://boot.scr.cmd"
 
-PV = "2.6"
+PV = "3.1"
 
 inherit kernel-arch extlinuxconf-stm32mp
 
@@ -20,8 +20,28 @@ UBOOT_EXTLINUX_BOOTSCR_IMG = "${B}/boot.scr.uimg"
 UBOOT_EXTLINUX_INSTALL_DIR ?= "/boot"
 
 do_compile() {
-    # Generate boot script only when multiple extlinux subdirs are set
-    if [ "$(find ${B}/* -maxdepth 0 -type d | wc -w)" -gt 1 ]; then
+    # If there is only one configuration, we try to figure out if we can cleanup
+    # to have a single exlinux.conf file on extlinux folder (to avoid using boot.scr script).
+    if [ "$(find ${B}/* -maxdepth 0 -type d | wc -w)" -eq 1 ] ; then
+        subdir=$(find ${B}/* -maxdepth 0 -type d)
+        bbnote "Only one subdir found for extlinux.conf files: ${subdir}"
+        # If there is the <DEVICETREE>_extlinux.conf file, then rename it to 'extlinux.conf'
+        # and use also default subdir name for u-boot (i.e. 'extlinux')
+        if [ "$(echo ${STM32MP_DEVICETREE} | wc -w)" -eq 1 ] ; then
+            dvtree=$(echo ${STM32MP_DEVICETREE})
+            bbnote "Only one devicetree defined: ${dvtree}"
+            if [ -f ${subdir}/${dvtree}_extlinux.conf ]; then
+                bbnote "Moving ${dvtree}_extlinux.conf to extlinux.conf file"
+                mv -f ${subdir}/${dvtree}_extlinux.conf ${subdir}/extlinux.conf
+            fi
+            if [ "$(basename ${subdir})" != "extlinux" ]; then
+                bbnote "Moving $(basename ${subdir}) to extlinux subdir"
+                mv -f ${subdir} ${B}/extlinux
+            fi
+        fi
+    fi
+    # Generate boot script only when multiple extlinux.conf file are set
+    if [ "$(find ${B}/* -name '*extlinux.conf' | wc -w)" -gt 1 ]; then
         mkimage -C none -A ${UBOOT_ARCH} -T script -d ${UBOOT_EXTLINUX_BOOTSCR} ${UBOOT_EXTLINUX_BOOTSCR_IMG}
     fi
 }

recipes-bsp/u-boot/u-boot-stm32mp-extlinux/boot.scr.cmd

@@ -1,45 +1,71 @@
 # Generate boot.scr.uimg:
 # ./tools/mkimage -C none -A arm -T script -d boot.src.cmd boot.scr.uimg
 #
+#########################################################################
+# SAMPLE BOOT SCRIPT: PLEASE DON'T USE this SCRIPT in REAL PRODUCT
+#########################################################################
+# this script is only a OpenSTLinux helper to manage multiple target with the
+# same bootfs, for real product with only one supported configuration change the
+# bootcmd in U-boot or use the normal path for extlinux.conf to use DISTRO
+# boocmd (generic distibution); U-Boot searches with boot_prefixes="/ /boot/":
+# - /extlinux/extlinux.conf
+# - /boot/extlinux/extlinux.conf
+#########################################################################
+
+echo "Executing SCRIPT on target=${target}"
 
 # M4 Firmware load
 env set m4fw_name "rproc-m4-fw.elf"
 env set m4fw_addr ${kernel_addr_r}
-env set boot_m4fw 'rproc init; rproc load 0 ${m4fw_addr} ${filesize}; rproc load_rsc 0 ${m4fw_addr} ${filesize}; rproc start 0'
+env set boot_m4fw 'rproc init; rproc load 0 ${m4fw_addr} ${filesize}; rproc start 0'
 
 # boot M4 Firmware when available
 env set scan_m4fw 'if test -e ${devtype} ${devnum}:${distro_bootpart} ${m4fw_name};then echo Found M4 FW $m4fw_name; if load ${devtype} ${devnum}:${distro_bootpart} ${m4fw_addr} ${m4fw_name}; then run boot_m4fw; fi; fi;'
 
-# Update DISTRO command= search in sub-directory and load M4 firmware
-env set boot_prefixes "/${boot_device}${boot_instance}_${board_name}_"
+# Update the DISTRO command to search in sub-directory and load M4 firmware
+env set boot_prefixes "/${boot_device}${boot_instance}_"
 env set boot_extlinux "run scan_m4fw;${boot_extlinux}"
 
-if test ${boot_device} = mmc; then
-    if test ${distro_bootpart} > 4; then
-        env set boot_prefixes "/mmc${boot_instance}_${board_name}-optee_"
+# save the boot config for the 2nd boot
+env set boot_targets ${target}
+
+# when {boot_device} = nor, use ${target} = the location of U-Boot
+# script boot.scr.img found in DISTRO script
+# value can be "mmc0" (SD Card), "mmc1" (eMMC) or "ubifs0" (NAND)
+
+if test ${target} = mmc0; then
+    if test -d ${devtype} ${devnum}:${distro_bootpart} /mmc0_extlinux; then
+        env set boot_prefixes "/mmc0_"
+    fi
+elif test ${target} = mmc1; then
+    if test -d ${devtype} ${devnum}:${distro_bootpart} /mmc1_extlinux; then
+        env set boot_prefixes "/mmc1_"
+    fi
+elif test ${target} = ubifs0; then
+    if test -d ${devtype} ${devnum}:${distro_bootpart} /nand0_extlinux; then
+        env set boot_prefixes "/nand0_"
     fi
-
-    #start the correct exlinux.conf
-    run scan_dev_for_boot_part
-
-elif test ${boot_device} = nand; then
-
-    #start the correct exlinux.conf without remount UBI
-    run scan_dev_for_boot
-
-elif test ${boot_device} = nor; then
-
-    #EMMC boot
-    env set boot_prefixes "/${boot_device}${boot_instance}-mmc1_${board_name}_"
-    run bootcmd_mmc1
-
-    #NAND boot
-    env set boot_prefixes "/nand0_${board_name}_"
-    run bootcmd_ubifs0
-
-    #SDCARD boot
-    env set boot_prefixes "/${boot_device}${boot_instance}_${board_name}_"
-    run bootcmd_mmc0
 fi
 
-echo SCRIPT FAILED... ${boot_prefixes}extlinux/extlinux.conf not found !
+if test -e ${devtype} ${devnum}:${distro_bootpart} ${boot_prefixes}extlinux/${board_name}_extlinux.conf; then
+    echo FOUND ${boot_prefixes}extlinux/${board_name}_extlinux.conf
+    env set boot_syslinux_conf "extlinux/${board_name}_extlinux.conf"
+fi
+
+# don't save the updated content of bootfile variable to avoid conflict
+env delete bootfile
+
+# save the boot config the 2nd boot (boot_prefixes/boot_extlinux)
+env save
+
+# start the correct exlinux.conf
+run bootcmd_${target}
+
+echo SCRIPT FAILED... ${boot_prefixes}${boot_syslinux_conf} not found !
+
+# restore environment to default value when failed
+env default boot_targets
+env default boot_prefixes
+env default boot_extlinux
+env default boot_syslinux_conf
+env save