276 lines
16 KiB
HTML
276 lines
16 KiB
HTML
#@DESCRIPTION: STM32MP machine flashlayout configuration
|
|
|
|
inherit flashlayout-stm32mp
|
|
|
|
# Add specific dependencies to get all binaries generated before flashlayout files
|
|
FLASHLAYOUT_DEPEND_TASKS += "${@bb.utils.contains('EXTRA_IMAGEDEPENDS', 'virtual/trusted-firmware-a', 'virtual/trusted-firmware-a:do_deploy', '', d)}"
|
|
FLASHLAYOUT_DEPEND_TASKS += "${@bb.utils.contains('EXTRA_IMAGEDEPENDS', 'virtual/trusted-firmware-a-serialboot', 'virtual/trusted-firmware-a-serialboot:do_deploy', '', d)}"
|
|
FLASHLAYOUT_DEPEND_TASKS += "${@bb.utils.contains('EXTRA_IMAGEDEPENDS', 'virtual/bootloader', 'virtual/bootloader:do_deploy', '', d)}"
|
|
FLASHLAYOUT_DEPEND_TASKS += "${@bb.utils.contains('EXTRA_IMAGEDEPENDS', 'virtual/optee-os', 'virtual/optee-os:do_deploy', '', d)}"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# For the stm32mp flashlayout files, configuration is done to get output file
|
|
# with following name scheme:
|
|
# FlashLayout_<CONFIG_LABEL>[_<TYPE_LABEL>-<BOOTSCHEME_LABEL>].tsv
|
|
#
|
|
# The different labels are stored as list in different vars:
|
|
# - <BOOTSCHEME_LABEL> FLASHLAYOUT_BOOTSCHEME_LABELS
|
|
# - <CONFIG_LABEL> FLASHLAYOUT_CONFIG_LABELS
|
|
# - <TYPE_LABEL> FLASHLAYOUT_TYPE_LABELS
|
|
#
|
|
# The flashlayout file name is generated with following loop logic:
|
|
# for bootscheme in FLASHLAYOUT_BOOTSCHEME_LABELS (expanded according to ongoing OVERRIDES)
|
|
# for config in FLASHLAYOUT_CONFIG_LABELS (expanded according to ongoing $bootscheme and OVERRIDES)
|
|
# for typelabel in FLASHLAYOUT_TYPE_LABELS (expanded according to ongoing $bootscheme, $config and OVERRIDES)
|
|
# if FLASHLAYOUT_BOOTSCHEME_LABELS items > 1 && FLASHLAYOUT_TYPE_LABELS items > 1
|
|
# flashlayout_name = FlashLayout_$config_$typelabel-$bootscheme.tsv
|
|
# else
|
|
# flashlayout_name = FlashLayout_$config.tsv
|
|
#
|
|
# Each flashlayout file should contain lines that set the partition properties:
|
|
# <Opt> <Id> <Name> <Type> <IP> <Offset> <Binary>
|
|
#
|
|
# The partition properties are set with 'FLASHLAYOUT_PARTITION_xxx' vars:
|
|
# - <Opt> FLASHLAYOUT_PARTITION_ENABLE
|
|
# - <Id> FLASHLAYOUT_PARTITION_ID
|
|
# - <Name> Item from FLASHLAYOUT_PARTITION_LABELS list
|
|
# - <Type> FLASHLAYOUT_PARTITION_TYPE
|
|
# - <IP> FLASHLAYOUT_PARTITION_DEVICE
|
|
# - <Offset> FLASHLAYOUT_PARTITION_OFFSET
|
|
# - <Binary> FLASHLAYOUT_PARTITION_BIN2LOAD
|
|
#
|
|
# For the '$flashlayout_name' flashlayout file, the partition lines are generated
|
|
# with following loop logic:
|
|
# for partition in FLASHLAYOUT_PARTITION_LABELS (expanded according to ongoing $bootscheme, $config and OVERRIDES)
|
|
# OVERRIDES_PREV = OVERRIDES
|
|
# OVERRIDES = $partition:OVERRIDES
|
|
# Compute partition properties for $partiton (expanded according to ongoing $bootscheme, $config and OVERRIDES)
|
|
# Write new partition line to $flashlayout_name
|
|
# OVERRIDES = OVERRIDES_PREV
|
|
#
|
|
# Modifying the OVERRIDES inside the loop allows dynamic configuration for each
|
|
# partition property. This leaves plenty of possibility and guarantee specific
|
|
# '$partition' override.
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Define bootscheme labels
|
|
# -----------------------------------------------------------------------------
|
|
FLASHLAYOUT_BOOTSCHEME_LABELS += "${BOOTSCHEME_LABELS}"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Define config labels
|
|
# -----------------------------------------------------------------------------
|
|
# Priority var assignment (where <OVERRIDES> are the usual override mechanism):
|
|
# 1) FLASHLAYOUT_CONFIG_LABELS_<BOOTSCHEME>_<OVERRIDES>
|
|
# 2) FLASHLAYOUT_CONFIG_LABELS_<BOOTSCHEME>
|
|
# 3) FLASHLAYOUT_CONFIG_LABELS_<OVERRIDES>
|
|
# 4) FLASHLAYOUT_CONFIG_LABELS
|
|
# -----------------------------------------------------------------------------
|
|
FLASHLAYOUT_CONFIG_LABELS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'emmc', 'emmc', '', d)}"
|
|
FLASHLAYOUT_CONFIG_LABELS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nand-4-256', 'nand-4-256', '', d)}"
|
|
FLASHLAYOUT_CONFIG_LABELS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'nor-sdcard', 'nor-sdcard', '', d)}"
|
|
FLASHLAYOUT_CONFIG_LABELS += "${@bb.utils.contains('BOOTDEVICE_LABELS', 'sdcard', 'sdcard', '', d)}"
|
|
|
|
# Set by default this variable to 0, and set to 1 only when we are using st-example-image-*
|
|
ST_EXAMPLE_IMAGE ??= "0"
|
|
|
|
#FIXME need to manage overall device size to abort flashlayout creation in case of oversizing the storage devices
|
|
|
|
# Remove NAND flashlayout when we are using st-example-image-* as rootfs too big for a NAND device size of 1 GBytes
|
|
#FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'emmc', '', d)}"
|
|
FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'nand-4-256', '', d)}"
|
|
#FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'nor-sdcard', '', d)}"
|
|
#FLASHLAYOUT_CONFIG_LABELS_remove = "${@bb.utils.contains('ST_EXAMPLE_IMAGE', '1', 'sdcard', '', d)}"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Define label types for each config
|
|
# -----------------------------------------------------------------------------
|
|
# NOTE: We use devicetree to allow proper filtering on supported storage device
|
|
# -----------------------------------------------------------------------------
|
|
# Priority var assignment (where <OVERRIDES> are the usual override mechanism):
|
|
# 1) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
|
# 2) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<CONFIG>
|
|
# 3) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>_<OVERRIDES>
|
|
# 4) FLASHLAYOUT_TYPE_LABELS_<BOOTSCHEME>
|
|
# 5) FLASHLAYOUT_TYPE_LABELS_<CONFIG>_<OVERRIDES>
|
|
# 6) FLASHLAYOUT_TYPE_LABELS_<CONFIG>
|
|
# 7) FLASHLAYOUT_TYPE_LABELS_<OVERRIDES>
|
|
# 8) FLASHLAYOUT_TYPE_LABELS
|
|
# -----------------------------------------------------------------------------
|
|
# EMMC
|
|
# Set flashlayout file generation to eval board (mother and daughter) only
|
|
FLASHLAYOUT_TYPE_LABELS_emmc = "${STM32MP_DT_FILES_ED} ${STM32MP_DT_FILES_EV}"
|
|
# NAND
|
|
# Set flashlayout file generation to eval board only
|
|
FLASHLAYOUT_TYPE_LABELS_nand-4-256 = "${STM32MP_DT_FILES_EV}"
|
|
# NOR
|
|
# Set flashlayout file generation to eval board only
|
|
FLASHLAYOUT_TYPE_LABELS_nor-sdcard = "${STM32MP_DT_FILES_EV}"
|
|
# SDCARD
|
|
# Set flashlayout file generation for all boards
|
|
FLASHLAYOUT_TYPE_LABELS_sdcard = "${STM32MP_DT_FILES_DK} ${STM32MP_DT_FILES_ED} ${STM32MP_DT_FILES_EV}"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Define partitions to consider for flashlayout file generation
|
|
# -----------------------------------------------------------------------------
|
|
# NOTE: There are few restrictions to follow:
|
|
# - The partition for the first boot loader should follow the naming
|
|
# rule: fsbl*
|
|
# - The partition for the secondary boot loader should follow the naming
|
|
# rule: ssbl
|
|
# -----------------------------------------------------------------------------
|
|
# Priority var assignment (where <OVERRIDES> are the usual override mechanism):
|
|
# 1) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
|
# 2) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<CONFIG>
|
|
# 3) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>_<OVERRIDES>
|
|
# 4) FLASHLAYOUT_PARTITION_LABELS_<BOOTSCHEME>
|
|
# 5) FLASHLAYOUT_PARTITION_LABELS_<CONFIG>_<OVERRIDES>
|
|
# 6) FLASHLAYOUT_PARTITION_LABELS_<CONFIG>
|
|
# 7) FLASHLAYOUT_PARTITION_LABELS_<OVERRIDES>
|
|
# 8) FLASHLAYOUT_PARTITION_LABELS
|
|
# -----------------------------------------------------------------------------
|
|
|
|
# FLASHLAYOUT_PARTITION_IMAGES is initalized through PARTITIONS_CONFIG within 'flashlayout-stm32mp' class
|
|
FLASHLAYOUT_PARTITION_IMAGES ?= ""
|
|
# FLASHLAYOUT_BOOT_SEQUENCE is used to define the partition used at boot stage
|
|
FLASHLAYOUT_BOOT_SEQUENCE_TRUSTED ?= "fsbl1-boot ssbl-boot fsbl1 fsbl2 ssbl"
|
|
FLASHLAYOUT_BOOT_SEQUENCE_OPTEE ?= "fsbl1-boot ssbl-boot fsbl1 fsbl2 ssbl"
|
|
FLASHLAYOUT_BOOT_SEQUENCE_NAND_TRUSTED ?= "fsbl1-boot ssbl-boot fsbl1 ssbl ssbl2"
|
|
FLASHLAYOUT_BOOT_SEQUENCE_NAND_OPTEE ?= "fsbl1-boot ssbl-boot fsbl1 ssbl ssbl2"
|
|
|
|
FLASHLAYOUT_PARTITION_LABELS_optee_emmc = "${FLASHLAYOUT_BOOT_SEQUENCE_OPTEE} teeh teed teex ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
FLASHLAYOUT_PARTITION_LABELS_optee_nand-4-256 = "${FLASHLAYOUT_BOOT_SEQUENCE_NAND_OPTEE} teeh teed teex ubifs"
|
|
FLASHLAYOUT_PARTITION_LABELS_optee_nor-sdcard = "${FLASHLAYOUT_BOOT_SEQUENCE_OPTEE} env teeh teed teex empty ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
FLASHLAYOUT_PARTITION_LABELS_optee_sdcard = "${FLASHLAYOUT_BOOT_SEQUENCE_OPTEE} teeh teed teex ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
|
|
FLASHLAYOUT_PARTITION_LABELS_trusted_emmc = "${FLASHLAYOUT_BOOT_SEQUENCE_TRUSTED} ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
FLASHLAYOUT_PARTITION_LABELS_trusted_nand-4-256 = "${FLASHLAYOUT_BOOT_SEQUENCE_NAND_TRUSTED} ubifs"
|
|
FLASHLAYOUT_PARTITION_LABELS_trusted_nor-sdcard = "${FLASHLAYOUT_BOOT_SEQUENCE_TRUSTED} env empty ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
FLASHLAYOUT_PARTITION_LABELS_trusted_sdcard = "${FLASHLAYOUT_BOOT_SEQUENCE_TRUSTED} ${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Partition properties configuration
|
|
# -----------------------------------------------------------------------------
|
|
# Priority var assignment (where <OVERRIDES> are the usual override mechanism
|
|
# with dynamic append of ongoing 'partition name' item):
|
|
# 1) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<CONFIG>_<OVERRIDES>
|
|
# 2) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<CONFIG>
|
|
# 3) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>_<OVERRIDES>
|
|
# 4) FLASHLAYOUT_PARTITION_xxx_<BOOTSCHEME>
|
|
# 5) FLASHLAYOUT_PARTITION_xxx_<CONFIG>_<OVERRIDES>
|
|
# 6) FLASHLAYOUT_PARTITION_xxx_<CONFIG>
|
|
# 7) FLASHLAYOUT_PARTITION_xxx_<OVERRIDES>
|
|
# 8) FLASHLAYOUT_PARTITION_xxx
|
|
# 9) Default 'FLASHLAYOUT_PARTITION_xxx' to 'none' when not defined
|
|
# -----------------------------------------------------------------------------
|
|
FLASHLAYOUT_PARTITION_ENABLE = "P"
|
|
FLASHLAYOUT_PARTITION_ENABLE_fsbl1-boot = "-"
|
|
FLASHLAYOUT_PARTITION_ENABLE_ssbl-boot = "-"
|
|
FLASHLAYOUT_PARTITION_ENABLE_empty = "PE"
|
|
FLASHLAYOUT_PARTITION_ENABLE_env = "PED"
|
|
# Due to association of u-boot and env, the ssbl partition need to be deleted
|
|
FLASHLAYOUT_PARTITION_ENABLE_sdcard_ssbl = "PD"
|
|
FLASHLAYOUT_PARTITION_ENABLE_emmc_ssbl = "PD"
|
|
# Due to potential swith between trused and optee, need to be delete teeh partitions
|
|
FLASHLAYOUT_PARTITION_ENABLE_sdcard_teeh = "PD"
|
|
FLASHLAYOUT_PARTITION_ENABLE_emmc_teeh = "PD"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Partition ID
|
|
# -----------------------------------------------------------------------------
|
|
# The STM32CubeProgrammer supported ID range is:
|
|
# 0x00 to 0xFF
|
|
# Some IDs are reserved for internal usage on STM32CubeProgrammer and special
|
|
# management is implemented for binary with STM32 header. This means that for
|
|
# flashlayout files, available ID range is only:
|
|
# 0x01 to 0x0F for Boot partitions with STM32 header
|
|
# 0x10 to 0xF0 for User partitions programmed without header
|
|
# Note also that for FSBL and SSBL binaries loaded in RAM to program the devices
|
|
# there are two reserved IDs
|
|
# 0x01 for FSBL
|
|
# 0x03 for SSBL
|
|
FLASHLAYOUT_PARTITION_ID_fsbl1-boot = "0x01"
|
|
FLASHLAYOUT_PARTITION_ID_ssbl-boot = "0x03"
|
|
FLASHLAYOUT_PARTITION_ID_fsbl1 = "0x04"
|
|
FLASHLAYOUT_PARTITION_ID_fsbl2 = "0x05"
|
|
FLASHLAYOUT_PARTITION_ID_ssbl = "0x06"
|
|
FLASHLAYOUT_PARTITION_ID_ssbl2 = "0x07"
|
|
FLASHLAYOUT_PARTITION_ID_teeh = "0x0A"
|
|
FLASHLAYOUT_PARTITION_ID_teed = "0x0B"
|
|
FLASHLAYOUT_PARTITION_ID_teex = "0x0C"
|
|
FLASHLAYOUT_PARTITION_ID_empty = "0x10"
|
|
FLASHLAYOUT_PARTITION_ID_env = "0x20"
|
|
FLASHLAYOUT_PARTITION_ID_ubifs = "0x21"
|
|
|
|
FLASHLAYOUT_PARTITION_TYPE = "Binary"
|
|
FLASHLAYOUT_PARTITION_TYPE_nand-4-256_fsbl1 = "Binary(2)"
|
|
FLASHLAYOUT_PARTITION_TYPE_ubifs = "System"
|
|
|
|
FLASHLAYOUT_PARTITION_DEVICE_emmc = "none:fsbl1-boot ssbl-boot,${DEVICE_EMMC}:default"
|
|
FLASHLAYOUT_PARTITION_DEVICE_nand-4-256 = "none:fsbl1-boot ssbl-boot,${DEVICE_NAND}:default"
|
|
FLASHLAYOUT_PARTITION_DEVICE_nor-sdcard = "none:fsbl1-boot ssbl-boot,${DEVICE_NOR}:default,${DEVICE_SDCARD}:${FLASHLAYOUT_PARTITION_IMAGES}"
|
|
FLASHLAYOUT_PARTITION_DEVICE_sdcard = "none:fsbl1-boot ssbl-boot,${DEVICE_SDCARD}:default"
|
|
|
|
FLASHLAYOUT_PARTITION_OFFSET_fsbl1-boot = "0x0"
|
|
FLASHLAYOUT_PARTITION_OFFSET_ssbl-boot = "0x0"
|
|
FLASHLAYOUT_PARTITION_OFFSET_emmc_fsbl1 = "${DEVICE_START_OFFSET_BOOT0_EMMC}"
|
|
FLASHLAYOUT_PARTITION_OFFSET_emmc_fsbl2 = "${DEVICE_START_OFFSET_BOOT1_EMMC}"
|
|
FLASHLAYOUT_PARTITION_OFFSET_emmc_ssbl = "${DEVICE_START_OFFSET_EMMC}"
|
|
|
|
# Size defined in Kbytes
|
|
FLASHLAYOUT_PARTITION_SIZE_fsbl1 = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_fsbl2 = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_ssbl = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_ssbl2 = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_env = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_teeh = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_teed = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_teex = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_empty = "0"
|
|
# Specific override for MTD partitions hard coded on U-Boot side
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_fsbl1 = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_ssbl = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_ssbl2 = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_teeh = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_teed = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_nand-4-256_teex = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_fsbl1 = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_fsbl2 = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_ssbl = "2048"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_env = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_teeh = "256"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_teed = "512"
|
|
FLASHLAYOUT_PARTITION_SIZE_nor-sdcard_teex = "256"
|
|
|
|
# Set binaries to use for each partition
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_fsbl1-boot = "arm-trusted-firmware/tf-a.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_ssbl-boot = "bootloader/u-boot.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_fsbl1 = "arm-trusted-firmware/tf-a.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_fsbl2 = "arm-trusted-firmware/tf-a.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_ssbl = "bootloader/u-boot.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_ssbl2 = "bootloader/u-boot.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_teeh = "optee/tee-header_v2.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_teed = "optee/tee-pageable_v2.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_teex = "optee/tee-pager_v2.stm32"
|
|
FLASHLAYOUT_PARTITION_BIN2LOAD_ubifs = "${IMAGE_LINK_NAME}_nand_4_256_multivolume.ubi"
|
|
|
|
# -----------------------------------------------------------------------------
|
|
# Use the 'FLASHLAYOUT_PARTITION_REPLACE_PATTERNS' var to allow dynamic binary
|
|
# renaming for the bootloader binaries. This is only required for fsbl1-boot and
|
|
# ssbl-boot partitions that provides the binary to flash the device.
|
|
# The format to follow is:
|
|
# '<PATTERN2REPLACE_1>;<PATTERN2SET_1> <PATTERN2REPLACE_2>;<PATTERN2SET_2>'
|
|
# And the pattern to replace in binary name is only searched as:
|
|
# '-<PATTERN>$'
|
|
# or
|
|
# '-<PATTERN>-'
|
|
# -----------------------------------------------------------------------------
|
|
# We use specific tf-a serialboot mode for any bootscheme for fsbl1-boot
|
|
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_fsbl1-boot_append = " optee;serialboot trusted;serialboot"
|
|
|
|
# The daughter board does not support Programmer mode, so use eval one
|
|
# (valid for both fsbl1-boot and ssbl-boot)
|
|
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_fsbl1-boot_append = " ed1;ev1"
|
|
FLASHLAYOUT_PARTITION_REPLACE_PATTERNS_ssbl-boot_append = " ed1;ev1"
|