Compilation of the gcnano kernel module:
1. Pre-requisite
2. Compile the gcnano kernel module
3. Update software on board
4. Update Starter Package with gcnano kernel module compilation outputs
----------------
1. Pre-requisite
----------------
- OpenSTLinux SDK must be installed.
- Linux Kernel source must be installed and built
----------------
2. Compile the gcnano kernel module
----------------
OpenSTLinux SDK must be installed.
* Compile and install the gcnano kernel module
$> tar xf ##BP##-##PR##.tar.xz
$> cd ##GCNANO_TARNAME##
$> KERNEL_BUILDDIR="../../linux-stm32mp-<KERNELVERSION>-stm32mp-<RELEASE>/build"
* Build kernel module
$> make ARCH=arm SOC_PLATFORM=st-mp1 DEBUG=0 O="${KERNEL_BUILDDIR}" M="${PWD}" AQROOT="${PWD}" -C ${KERNEL_BUILDDIR}
---------------------------
3. Update software on board
---------------------------
3.1 Update via network
----------------------
Copy kernel modules:
$ scp galcore.ko root@<ip of board>:/lib/modules/<kernel version>/extra
Generate a list of module dependencies (modules.dep) and a list of symbols
provided by modules (modules.symbols):
$ ssh root@<ip of board> /sbin/depmod -a
Synchronize data on disk with memory
$ ssh root@<ip of board> sync
Reboot the board in order to take update into account
$ ssh root@<ip of board> reboot
---------------------------
4. Update Starter Package with gcnano kernel module compilation outputs
---------------------------
<-- Section under construction -->
If not already done, extract the artifacts from Starter Package tarball, for example:
# tar xf en.FLASH-stm32mp1-*.tar.xz
Move to Starter Package root folder,
#> cd <your_starter_package_dir_path>
Cleanup Starter Package from original gcnano kernel module artifacts first
#> echo "*** Section under construction ***"
<-- Section under construction -->
772e22bca4