public
/
meta-st-stm32mp
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
meta-st-stm32mp/recipes-kernel/linux/linux-stm32mp/4.19/4.19.9/0016-ARM-stm32mp1-r0-rc1-DE...

4894 lines
139 KiB
Diff
Raw Blame History

From adbdec4cf36d1cf2127da0c16b43ec88a5e7253c Mon Sep 17 00:00:00 2001
From: Romuald JEANNE <romuald.jeanne@st.com>
Date: Tue, 13 Nov 2018 12:31:28 +0100
Subject: [PATCH 16/52] ARM: stm32mp1-r0-rc1: DEVICETREE
---
.../devicetree/bindings/dma/stm32-dma.txt | 32 +-
.../devicetree/bindings/dma/stm32-dmamux.txt | 5 +-
.../devicetree/bindings/dma/stm32-mdma.txt | 22 +-
.../devicetree/bindings/i2c/i2c-stm32.txt | 48 +-
.../devicetree/bindings/iio/adc/st,stm32-adc.txt | 64 ++-
.../bindings/iio/counter/stm32-lptimer-cnt.txt | 8 +-
.../bindings/iio/timer/stm32-timer-trigger.txt | 9 +
.../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 +
.../devicetree/bindings/mfd/st,stm32mp1-pwr.txt | 53 ++
.../devicetree/bindings/mfd/st,stpmic1.txt | 132 +++++
Documentation/devicetree/bindings/mfd/stmfx.txt | 28 +
Documentation/devicetree/bindings/mmc/mmci.txt | 11 +
.../devicetree/bindings/mtd/stm32-fmc2-nand.txt | 59 ++
.../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++
.../devicetree/bindings/pinctrl/pinctrl-stmfx.txt | 116 ++++
.../bindings/pinctrl/st,stm32-pinctrl.txt | 2 +
.../devicetree/bindings/pwm/pwm-stm32-lp.txt | 9 +-
.../devicetree/bindings/pwm/pwm-stm32.txt | 8 +-
.../bindings/regulator/st,stm32mp1-pwr-reg.txt | 31 ++
.../bindings/regulator/st,stpmic1-regulator.txt | 68 +++
.../devicetree/bindings/remoteproc/rproc-srm.txt | 57 ++
.../devicetree/bindings/remoteproc/stm32-rproc.txt | 78 +++
.../devicetree/bindings/rtc/st,stm32-rtc.txt | 10 +-
.../devicetree/bindings/serial/st,stm32-usart.txt | 40 +-
.../devicetree/bindings/spi/spi-stm32-qspi.txt | 44 ++
.../bindings/watchdog/st,stpmic1-wdt.txt | 11 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 603 ++++++++++++++++++++-
arch/arm/boot/dts/stm32mp157a-dk1.dts | 412 ++++++++++++++
arch/arm/boot/dts/stm32mp157c-dk2.dts | 22 +
arch/arm/boot/dts/stm32mp157c-ed1.dts | 301 +++++++++-
arch/arm/boot/dts/stm32mp157c-ev1.dts | 121 ++++-
arch/arm/boot/dts/stm32mp157c-m4-srm.dtsi | 436 +++++++++++++++
arch/arm/boot/dts/stm32mp157c.dtsi | 457 ++++++++++++++--
arch/arm/boot/dts/stm32mp157caa-pinctrl.dtsi | 90 +++
arch/arm/boot/dts/stm32mp157cab-pinctrl.dtsi | 62 +++
arch/arm/boot/dts/stm32mp157cac-pinctrl.dtsi | 78 +++
arch/arm/boot/dts/stm32mp157cad-pinctrl.dtsi | 62 +++
38 files changed, 3526 insertions(+), 124 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
create mode 100644 Documentation/devicetree/bindings/mfd/st,stm32mp1-pwr.txt
create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt
create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt
create mode 100644 Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
create mode 100644 Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/rproc-srm.txt
create mode 100644 Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
create mode 100644 Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2.dts
create mode 100644 arch/arm/boot/dts/stm32mp157c-m4-srm.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157caa-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157cab-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157cac-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157cad-pinctrl.dtsi
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index c5f5190..163be09 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -17,6 +17,12 @@ Optional properties:
- resets: Reference to a reset controller asserting the DMA controller
- st,mem2mem: boolean; if defined, it indicates that the controller supports
memory-to-memory transfer
+- dmas: A list of eight dma specifiers, one for each entry in dma-names.
+ Refer to stm32-mdma.txt for more details.
+- dma-names: should contain "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6" and
+ "ch7" and represents each STM32 DMA channel connected to a STM32 MDMA one.
+- memory-region : phandle to a node describing memory to be used for
+ M2M intermediate transfer between DMA and MDMA.
Example:
@@ -36,6 +42,16 @@ Example:
st,mem2mem;
resets = <&rcc 150>;
dma-requests = <8>;
+ dmas = <&mdma1 8 0x10 0x1200000a 0x40026408 0x00000020 1>,
+ <&mdma1 9 0x10 0x1200000a 0x40026408 0x00000800 1>,
+ <&mdma1 10 0x10 0x1200000a 0x40026408 0x00200000 1>,
+ <&mdma1 11 0x10 0x1200000a 0x40026408 0x08000000 1>,
+ <&mdma1 12 0x10 0x1200000a 0x4002640C 0x00000020 1>,
+ <&mdma1 13 0x10 0x1200000a 0x4002640C 0x00000800 1>,
+ <&mdma1 14 0x10 0x1200000a 0x4002640C 0x00200000 1>,
+ <&mdma1 15 0x10 0x1200000a 0x4002640C 0x08000000 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7";
+ memory-region = <&sram_dmapool>;
};
* DMA client
@@ -62,13 +78,21 @@ channel: a phandle to the DMA controller plus the following four integer cells:
0x1: medium
0x2: high
0x3: very high
-4. A 32bit bitfield value specifying DMA features which are device dependent:
+4. A bitfield value specifying DMA features which are device dependent:
-bit 0-1: DMA FIFO threshold selection
0x0: 1/4 full FIFO
0x1: 1/2 full FIFO
0x2: 3/4 full FIFO
0x3: full FIFO
-
+ -bit 2: Intermediate M2M transfer from/to DDR to/from SRAM throughout MDMA
+ 0: MDMA not used to generate an intermediate M2M transfer
+ 1: MDMA used to generate an intermediate M2M transfer.
+ -bit 3-4: indicated SRAM Buffer size in (2^order)*PAGE_SIZE.
+ Order is given by those 2 bits starting at 0.
+ Valid only whether Intermediate M2M transfer is set.
+ For cyclic, whether Intermediate M2M transfer is chosen, any value can
+ be set: SRAM buffer size will rely on period size and not on this DT
+ value.
Example:
@@ -77,7 +101,7 @@ Example:
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&clk_pclk2>;
- dmas = <&dma2 2 4 0x10400 0x3>,
- <&dma2 7 5 0x10200 0x3>;
+ dmas = <&dma2 2 4 0x10400 0x1>,
+ <&dma2 7 5 0x10200 0x1>;
dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
index 1b893b2..8e092d2 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
@@ -4,9 +4,6 @@ Required properties:
- compatible: "st,stm32h7-dmamux"
- reg: Memory map for accessing module
- #dma-cells: Should be set to <3>.
- First parameter is request line number.
- Second is DMA channel configuration
- Third is Fifo threshold
For more details about the three cells, please see
stm32-dma.txt documentation binding file
- dma-masters: Phandle pointing to the DMA controllers.
@@ -53,7 +50,7 @@ dma2: dma@40020400 {
<68>,
<69>,
<70>;
- clocks = <&timer_clk>;
+ clocks = <&clk_hclk>;
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
index d18772d..1810f87 100644
--- a/Documentation/devicetree/bindings/dma/stm32-mdma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
@@ -10,7 +10,7 @@ Required properties:
- interrupts: Should contain the MDMA interrupt.
- clocks: Should contain the input clock of the DMA instance.
- resets: Reference to a reset controller asserting the DMA controller.
-- #dma-cells : Must be <5>. See DMA client paragraph for more details.
+- #dma-cells : Must be <6>. See DMA client paragraph for more details.
Optional properties:
- dma-channels: Number of DMA channels supported by the controller.
@@ -26,7 +26,7 @@ Example:
interrupts = <122>;
clocks = <&timer_clk>;
resets = <&rcc 992>;
- #dma-cells = <5>;
+ #dma-cells = <6>;
dma-channels = <16>;
dma-requests = <32>;
st,ahb-addr-masks = <0x20000000>, <0x00000000>;
@@ -35,8 +35,8 @@ Example:
* DMA client
DMA clients connected to the STM32 MDMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each channel:
-a phandle to the MDMA controller plus the following five integer cells:
+described in the dma.txt file, using a six-cell specifier for each channel:
+a phandle to the MDMA controller plus the following six integer cells:
1. The request line number
2. The priority level
@@ -76,19 +76,23 @@ a phandle to the MDMA controller plus the following five integer cells:
if no HW ack signal is used by the MDMA client
5. A 32bit mask specifying the value to be written to acknowledge the request
if no HW ack signal is used by the MDMA client
+6. A bitfield value specifying if the MDMA client wants to generate M2M
+ transfer with HW trigger (1) or not (0). This bitfield should be only
+ enabled for M2M transfer triggered by STM32 DMA client. The memory devices
+ involved in this kind of transfer are SRAM and DDR.
Example:
i2c4: i2c@5c002000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c002000 0x400>;
- interrupts = <95>,
- <96>;
- clocks = <&timer_clk>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>,
+ <GIC_SPI 96 IRQ_TYPE_NONE>;
+ clocks = <&clk_hsi>;
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
- <&mdma1 37 0x0 0x40002 0x0 0x0>;
+ dmas = <&mdma1 36 0x0 0x40008 0x0 0x0 0>,
+ <&mdma1 37 0x0 0x40002 0x0 0x0 0>;
dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
index 3b54899..e76fe82 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt
@@ -7,10 +7,12 @@ Required properties :
- reg : Offset and length of the register set for the device
- interrupts : Must contain the interrupt id for I2C event and then the
interrupt id for I2C error.
+ Optionnaly a wakeup interrupt may be specified.
- resets: Must contain the phandle to the reset controller.
- clocks: Must contain the input clock of the I2C instance.
- A pinctrl state named "default" must be defined to set pins in mode of
- operation for I2C transfer
+ operation for I2C transfer. An optional pinctrl state named "sleep" has to
+ be defined as well as to put I2C in low power mode in suspend mode.
- #address-cells = <1>;
- #size-cells = <0>;
@@ -26,6 +28,11 @@ Optional properties :
- i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
(default: 10)
I2C Timings are derived from these 2 values
+- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
+ whether Fast Mode Plus speed is selected by slave.
+ 1st cell : phandle to syscfg
+ 2nd cell : register offset within SYSCFG
+ 3rd cell : register bitmask for FMP bit
Example :
@@ -52,5 +59,42 @@ Example :
resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
clocks = <&rcc 1 CLK_I2C1>;
pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
- pinctrl-names = "default";
+ pinctrl-1 = <&i2c1_sda_pin_sleep>, <&i2c1_scl_pin_sleep>;
+ pinctrl-names = "default", "sleep";
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
+ };
+
+ i2c@40013000 {
+ compatible = "st,stm32f7-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40013000 0x400>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 22 1>;
+ clocks = <&rcc I2C2_K>;
+ resets = <&rcc I2C2_R>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
+ };
+
+
+* I2C Devices
+
+An I2C device connected onto STM32 I2C controller must use a format described by
+i2c.txt file.
+
+Required properties :
+- compatible
+ Device driver compatible name
+- reg
+ I2C slave addresses (see i2c.txt for more details)
+
+Optional properties :
+
+ i2c@40013000 {
+ camera@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ };
};
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
index 8346bcb..c46598c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
@@ -46,6 +46,8 @@ Required properties:
Optional properties:
- A pinctrl state named "default" for each ADC channel may be defined to set
inX ADC pins in mode of operation for analog input on external pin.
+- st,max-clk-rate-hz: Allow to specify desired max clock rate used by analog
+ circuitry.
Contents of a stm32 adc child node:
-----------------------------------
@@ -63,8 +65,8 @@ Required properties:
- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
2 for adc@200).
- st,adc-channels: List of single-ended channels muxed for this ADC.
- It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered
- from 0 to 15 or 19 (resp. for in0..in15 or in0..in19).
+ It can have up to 19 channels on stm32f4 or 20 channels on stm32h7, numbered
+ from 0 to 18 or 19 (resp. for in0..in18 or in0..in19).
- st,adc-diff-channels: List of differential channels muxed for this ADC.
Depending on part used, some channels can be configured as differential
instead of single-ended (e.g. stm32h7). List here positive and negative
@@ -91,6 +93,38 @@ Optional properties:
fine tune of ADC sampling time may be recommended.
This can be either one value or an array that matches 'st,adc-channels' list,
to set sample time resp. for all channels, or independently for each channel.
+- st,trigger-polarity: Must be 0 (default), 1 or 2 to set default trigger
+ polarity to respectively "rising-edge", "falling-edge" or "both-edges".
+- st,injected: Use injected conversion sequence on an ADC, rather than regular.
+
+Contents of a STM32 ADC temperature child node:
+-----------------------------------------------
+Required properties:
+- compatible: Should be one of:
+ "st,stm32f4-adc-temp"
+ "st,stm32h7-adc-temp"
+ "st,stm32mp1-adc-temp"
+- io-channels: Phandle to STM32 ADC temperature channel.
+- #io-channel-cells = <0>;
+- #thermal-sensor-cells = <0>;
+
+Optional properties:
+- nvmem-cells: Phandles to nvmem cells that contain "ts_cal1" and "ts_cal2".
+- nvmem-cell-names: Must be "ts_cal1", "ts_cal2".
+
+Contents of a stm32 adc EXTI trigger child node:
+------------------------------------------------
+EXTI (External interrupt) can be used by STM32ADC as trigger source for
+conversions. ADC may use up to two EXTI GPIO lines: 11 & 15, e.g. external
+trigger signal can be routed to GPIOx (x is bank) pin 11 and/or 15. So,
+exti trigger child node is optional.
+
+Required properties:
+- trigger-name: Must be exti11 (regular) or exti15 (injected).
+- interrupts: The exti interrupt source used as trigger. Generic interrupt
+ client node as described in ../../interrupt-controller/interrupts.txt
+ EXTI IRQ number must match with above trigger-name (e.g. 11 or 15).
+- interrupt-parent: Must be phandle to gpio bank.
Example:
adc: adc@40012000 {
@@ -119,9 +153,16 @@ Example:
dmas = <&dma2 0 0 0x400 0x0>;
dma-names = "rx";
assigned-resolution-bits = <8>;
+ st,trigger-polarity = <1>;
};
...
other adc child nodes follow...
+
+ exti11 {
+ trigger-name = "exti11";
+ interrupts = <11 0>;
+ interrupt-parent = <&gpioa>;
+ };
};
Example to setup:
@@ -138,3 +179,22 @@ Example to setup:
st,adc-diff-channels = <2 6>, <3 7>;
};
};
+
+Temperature sensor example:
+ adc: adc@40012000 {
+ compatible = "st,stm32f4-adc-core";
+ ...
+ adc1: adc@0 {
+ ...
+ st,adc-channels = <18>;
+ st,min-sample-time-nsecs = <10000>;
+ };
+ adc_temp: temp {
+ compatible = "st,stm32f4-adc-temp";
+ io-channels = <&adc1 18>;
+ nvmem-cells = <&ts_cal1>, <&ts_cal2>;
+ nvmem-cell-names = "ts_cal1", "ts_cal2";
+ #io-channel-cells = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
index a04aa5c..e90bc47 100644
--- a/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
+++ b/Documentation/devicetree/bindings/iio/counter/stm32-lptimer-cnt.txt
@@ -10,8 +10,9 @@ See ../mfd/stm32-lptimer.txt for details about the parent node.
Required properties:
- compatible: Must be "st,stm32-lptimer-counter".
-- pinctrl-names: Set to "default".
-- pinctrl-0: List of phandles pointing to pin configuration nodes,
+- pinctrl-names: Set to "default". An additional "sleep" state can be
+ defined to set pins in sleep state.
+- pinctrl-n: List of phandles pointing to pin configuration nodes,
to set IN1/IN2 pins in mode of operation for Low-Power
Timer input on external pin.
@@ -21,7 +22,8 @@ Example:
...
counter {
compatible = "st,stm32-lptimer-counter";
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&lptim1_in_pins>;
+ pinctrl-1 = <&lptim1_sleep_in_pins>;
};
};
diff --git a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
index b8e8c76..4713ff1 100644
--- a/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
+++ b/Documentation/devicetree/bindings/iio/timer/stm32-timer-trigger.txt
@@ -9,6 +9,12 @@ Required parameters:
"st,stm32h7-timer-trigger"
- reg: Identify trigger hardware block.
+Optional properties:
+- pinctrl-names: Set to "default". An additional "sleep" state can be
+ defined to set pins in sleep state when in low power.
+- pinctrl-n: Phandle(s) pointing to pin configuration node for PWM,
+ respectively for "default" and "sleep" states.
+
Example:
timers@40010000 {
#address-cells = <1>;
@@ -21,5 +27,8 @@ Example:
timer@0 {
compatible = "st,stm32-timer-trigger";
reg = <0>;
+ pinctrl-0 = <&tim1_pins>;
+ pinctrl-1 = <&tim1_sleep_pins>;
+ pinctrl-names = "default", "sleep";
};
};
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
new file mode 100644
index 0000000..4494613
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
@@ -0,0 +1,28 @@
+STMicroelectronics STPMIC1 Onkey
+
+Required properties:
+
+- compatible = "st,stpmic1-onkey";
+- interrupts: interrupt line to use
+- interrupt-names = "onkey-falling", "onkey-rising"
+ onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
+ onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
+
+Optional properties:
+
+- st,onkey-clear-cc-flag: onkey is able power on after an
+ over-current shutdown event.
+- st,onkey-pu-inactive: onkey pull up is not active
+- power-off-time-sec: Duration in seconds which the key should be kept
+ pressed for device to power off automatically (from 1 to 16 seconds).
+ see See Documentation/devicetree/bindings/input/keys.txt
+
+Example:
+
+onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupt-parent = <&pmic>;
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32mp1-pwr.txt b/Documentation/devicetree/bindings/mfd/st,stm32mp1-pwr.txt
new file mode 100644
index 0000000..8e04895
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stm32mp1-pwr.txt
@@ -0,0 +1,53 @@
+STMicroelectronics STM32MP1 Power Management Controller
+=======================================================
+
+The PWR IP is responsible for handling the power related resources such as
+clocks, power supplies and resets. It provides 6 wake-up pins that are handled
+by an interrupt-controller. Wake-up pin can be used to wake-up from STANDBY SoC state.
+
+Required properties:
+- compatible should be: "st,stm32mp1-pwr"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: contains the reference to the gic wake-up pin interrupt
+- interrupt-controller; Enable interrupt controller for wake-up pins.
+- #interrupt-cells = <3>
+
+Optional Properties:
+- pwr-supply: main soc power supply
+
+Interrupt consumers have to specify 3 cells:
+ - cell 1: wake-up pin id from 0 to 5
+ - cell 2: IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_RISING
+ - cell 3: Pull config: 0 = No Pull, 1=Pull Up, 2=Pull Down
+
+
+Example:
+
+ pwr: pwr@50001000 {
+ compatible = "st,stm32mp1-pwr", "simple-mfd";
+ reg = <0x50001000 0x400>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pwr-supply = <&vdd>;
+ };
+
+
+Example of interrupt user:
+gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@4 {
+ label = "WakeUp4";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&pwr>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING 1>;
+ status = "okay";
+ wakeup-source;
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
new file mode 100644
index 0000000..54b64e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
@@ -0,0 +1,132 @@
+* STMicroelectronics STPMIC1 Power Management IC
+
+Required parent device properties:
+- compatible: "st,stpmic1"
+- reg: The I2C slave address for the STPMIC1 chip.
+- interrupts: The interrupt lines the device is connected to.
+ The second interrupt is used for wake-up.
+- #interrupt-cells: Should be 2.
+- interrupt-controller: Describes the STPMIC1 as an interrupt
+ controller (has its own domain). Interrupt number are the following:
+ /* Interrupt Register 1 (0x50 for latch) */
+ IT_SWOUT_R=0
+ IT_SWOUT_F=1
+ IT_VBUS_OTG_R=2
+ IT_VBUS_OTG_F=3
+ IT_WAKEUP_R=4
+ IT_WAKEUP_F=5
+ IT_PONKEY_R=6
+ IT_PONKEY_F=7
+ /* Interrupt Register 2 (0x51 for latch) */
+ IT_OVP_BOOST=8
+ IT_OCP_BOOST=9
+ IT_OCP_SWOUT=10
+ IT_OCP_OTG=11
+ IT_CURLIM_BUCK4=12
+ IT_CURLIM_BUCK3=13
+ IT_CURLIM_BUCK2=14
+ IT_CURLIM_BUCK1=15
+ /* Interrupt Register 3 (0x52 for latch) */
+ IT_SHORT_SWOUT=16
+ IT_SHORT_SWOTG=17
+ IT_CURLIM_LDO6=18
+ IT_CURLIM_LDO5=19
+ IT_CURLIM_LDO4=20
+ IT_CURLIM_LDO3=21
+ IT_CURLIM_LDO2=22
+ IT_CURLIM_LDO1=23
+ /* Interrupt Register 3 (0x52 for latch) */
+ IT_SWIN_R=24
+ IT_SWIN_F=25
+ IT_RESERVED_1=26
+ IT_RESERVED_2=27
+ IT_VINLOW_R=28
+ IT_VINLOW_F=29
+ IT_TWARN_R=30
+ IT_TWARN_F=31
+
+Optional parent device properties:
+- st,main-control-register:
+ -bit 1: Power cycling will be performed on turn OFF condition
+ -bit 2: PWRCTRL is functional
+ -bit 3: PWRCTRL active high
+- st,pads-pull-register:
+ -bit 1: WAKEUP pull down is not active
+ -bit 2: PWRCTRL pull up is active
+ -bit 3: PWRCTRL pull down is active
+ -bit 4: WAKEUP detector is disabled
+- st,vin-control-register:
+ -bit 0: VINLOW monitoring is enabled
+ -bit [1...3]: VINLOW rising threshold
+ 000 VINOK_f + 50mV
+ 001 VINOK_f + 100mV
+ 010 VINOK_f + 150mV
+ 011 VINOK_f + 200mV
+ 100 VINOK_f + 250mV
+ 101 VINOK_f + 300mV
+ 110 VINOK_f + 350mV
+ 111 VINOK_f + 400mV
+ -bit [4...5]: VINLOW hyst
+ 00 100mV
+ 01 200mV
+ 10 300mV
+ 11 400mV
+ -bit 6: SW_OUT detector is disabled
+ -bit 7: SW_IN detector is enabled.
+- st,usb-control-register:
+ -bit 3: SW_OUT current limit
+ 0: 600mA
+ 1: 1.1A
+ -bit 4: VBUS_OTG discharge is enabled
+ -bit 5: SW_OUT discharge is enabled
+ -bit 6: VBUS_OTG detection is enabled
+ -bit 7: BOOST_OVP is disabled
+
+STPMIC1 consists in a varied group of sub-devices.
+Each sub-device binding is be described in own documentation file.
+
+Device Description
+------ ------------
+st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt
+st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt
+st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt
+
+Example:
+
+pmic: pmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupt-parent = <&gpioa>;
+ interrupts = <0 2>;
+ st,main-control-register=<0x0c>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt
new file mode 100644
index 0000000..f0c2f7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stmfx.txt
@@ -0,0 +1,28 @@
+STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
+
+ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+communication with the main MCU. Its main features are GPIO expansion, main
+MCU IDD measurement (IDD is the amount of current that flows through VDD) and
+resistive touchscreen controller.
+
+Required properties:
+- compatible: should be "st,stmfx-0300".
+- reg: I2C slave address of the device.
+- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
+ Please refer to ../interrupt-controller/interrupt.txt
+
+Optional properties:
+- drive-open-drain: configure MFX_IRQ_OUT as open drain.
+- vdd-supply: phandle of the regulator supplying STMFX.
+
+Example:
+
+ stmfx: stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+ vdd-supply = <&v3v3>;
+ };
+
+Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.
diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 03796cf..6d3c626 100644
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -15,8 +15,11 @@ Required properties:
Optional properties:
- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides
the ID provided by the HW
+- resets : phandle to internal reset line.
+ Should be defined for sdmmc variant.
- vqmmc-supply : phandle to the regulator device tree node, mentioned
as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+specific for ux500 variant:
- st,sig-dir-dat0 : bus signal direction pin used for DAT[0].
- st,sig-dir-dat2 : bus signal direction pin used for DAT[2].
- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1].
@@ -24,6 +27,14 @@ Optional properties:
- st,sig-dir-cmd : cmd signal direction pin used for CMD.
- st,sig-pin-fbclk : feedback clock signal pin used.
+specific for sdmmc variant:
+- st,sig-dir : signal direction polarity used for cmd, dat0 dat123.
+- st,neg-edge : data & command phase relation, generated on
+ sd clock falling edge.
+- st,use-ckin : use ckin pin from an external driver to sample
+ the receive data (example: with voltage
+ switch transceiver).
+
Deprecated properties:
- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable.
- mmc-cap-sd-highspeed : indicates whether SD is high speed capable.
diff --git a/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
new file mode 100644
index 0000000..70e76be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
@@ -0,0 +1,59 @@
+STMicroelectronics Flexible Memory Controller 2 (FMC2)
+NAND Interface
+
+Required properties:
+- compatible: Should be one of:
+ * st,stm32mp15-fmc2
+- reg: NAND flash controller memory areas.
+ First region contains the register location.
+ Regions 2 to 4 respectively contain the data, command,
+ and address space for CS0.
+ Regions 5 to 7 contain the same areas for CS1.
+- interrupts: The interrupt number
+- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+- clocks: The clock needed by the NAND flash controller
+
+Optional properties:
+- resets: Reference to a reset controller asserting the FMC controller
+- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
+- dma-names: Must be "tx", "rx" and "ecc"
+
+Optional children nodes:
+Children nodes represent the available NAND chips.
+
+Optional properties:
+- nand-on-flash-bbt: see nand.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: see nand.txt
+
+The following ECC strength and step size are currently supported:
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
+ - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
+ - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
+
+Example:
+
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fmc_pins_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
new file mode 100644
index 0000000..fbff52e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
@@ -0,0 +1,31 @@
+STMicroelectronics STM32 Factory-programmed data device tree bindings
+
+This represents STM32 Factory-programmed read only non-volatile area: locked
+flash, OTP, read-only HW regs... This contains various information such as:
+analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2),
+internal vref (VREFIN_CAL), unique device ID...
+
+Required properties:
+- compatible: Should be one of:
+ "st,stm32-romem"
+ "st,stm32mp15-bsec"
+- reg: Offset and length of factory-programmed area.
+- #address-cells: Should be '<1>'.
+- #size-cells: Should be '<1>'.
+
+Optional Data cells:
+- Must be child nodes as described in nvmem.txt.
+
+Example on stm32f4:
+ romem: nvmem@1fff7800 {
+ compatible = "st,stm32-romem";
+ reg = <0x1fff7800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells: ts_cal1 at 0x1fff7a2c */
+ ts_cal1: calib@22c {
+ reg = <0x22c 0x2>;
+ };
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
new file mode 100644
index 0000000..c1b4c18
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
@@ -0,0 +1,116 @@
+STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
+
+ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
+Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
+
+Required properties:
+- compatible: should be "st,stmfx-0300-pinctrl".
+- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
+ cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
+- gpio-controller: marks the device as a GPIO controller.
+- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
+ second cell is the interrupt flags in accordance with
+ <dt-bindings/interrupt-controller/irq.h>.
+- interrupt-controller: marks the device as an interrupt controller.
+- gpio-ranges: specifies the mapping between gpio controller and pin
+ controller pins. Check "Concerning gpio-ranges property" below.
+Please refer to ../gpio/gpio.txt.
+
+Please refer to pinctrl-bindings.txt for pin configuration.
+
+Required properties for pin configuration sub-nodes:
+- pins: list of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes (pinconf-generic ones):
+- bias-disable: disable any bias on the pin.
+- bias-pull-up: the pin will be pulled up.
+- bias-pull-pin-default: use the pin-default pull state.
+- bias-pull-down: the pin will be pulled down.
+- drive-open-drain: the pin will be driven with open drain.
+- drive-push-pull: the pin will be driven actively high and low.
+- output-high: the pin will be configured as an output driving high level.
+- output-low: the pin will be configured as an output driving low level.
+
+Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
+called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
+
+Concerning gpio-ranges property:
+- if all STMFX pins[24:0] are available (no other STMFX function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+- if agpio[7:4] are not available (STMFX IDD function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+
+
+Example:
+
+ stmfx: stmfx@42 {
+ ...
+
+ stmfx_pinctrl: stmfx-pin-controller {
+ compatible = "st,stmfx-0300-pinctrl";
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ };
+
+Example of STMFX GPIO consumers:
+
+ joystick {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&joystick_pins>;
+ pinctrl-names = "default";
+ button-0 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-1 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-2 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-3 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-4 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ orange {
+ gpios = <&stmfx_pinctrl 17 1>;
+ };
+
+ blue {
+ gpios = <&stmfx_pinctrl 19 1>;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index ef4f2ff..286c981 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -56,6 +56,8 @@ Optional properties:
More details in Documentation/devicetree/bindings/gpio/gpio.txt.
- st,bank-ioport: should correspond to the EXTI IOport selection (EXTI line
used to select GPIOs as interrupts).
+ - st,package: Indicates the SOC package used.
+ More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
Example 1:
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
index bd23302..6521bc4 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt
@@ -11,8 +11,10 @@ Required parameters:
bindings defined in pwm.txt.
Optional properties:
-- pinctrl-names: Set to "default".
-- pinctrl-0: Phandle pointing to pin configuration node for PWM.
+- pinctrl-names: Set to "default". An additional "sleep" state can be
+ defined to set pins in sleep state when in low power.
+- pinctrl-n: Phandle(s) pointing to pin configuration node for PWM,
+ respectively for "default" and "sleep" states.
Example:
timer@40002400 {
@@ -21,7 +23,8 @@ Example:
pwm {
compatible = "st,stm32-pwm-lp";
#pwm-cells = <3>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&lppwm1_pins>;
+ pinctrl-1 = <&lppwm1_sleep_pins>;
};
};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
index 3e6d550..0e7a30b 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
@@ -5,8 +5,9 @@ See ../mfd/stm32-timers.txt for details about the parent node.
Required parameters:
- compatible: Must be "st,stm32-pwm".
-- pinctrl-names: Set to "default".
-- pinctrl-0: List of phandles pointing to pin configuration nodes for PWM module.
+- pinctrl-names: Set to "default". An additional "sleep" state can be
+ defined to set pins in sleep state when in low power.
+- pinctrl-n: List of phandles pointing to pin configuration nodes for PWM module.
For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
Optional parameters:
@@ -29,7 +30,8 @@ Example:
pwm {
compatible = "st,stm32-pwm";
pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm1_sleep_pins>;
+ pinctrl-names = "default", "sleep";
st,breakinput = <0 1 5>;
};
};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
new file mode 100644
index 0000000..cee27d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
@@ -0,0 +1,31 @@
+STM32MP1 POWER Regulators
+-------------------------
+
+Required properties:
+- compatible: Must be "st,stm32mp1,pwr-reg"
+- list of child nodes that specify the regulator
+ initialization data for defined regulators. The definition for each of
+ these nodes is defined using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+- st,tzcr: syscon of Trust Zone Configuration Register. Usefull to know if we
+ are in secure mode.
+ st,tzcr = &<phandle> <offset> <mask>;
+
+Example:
+
+ pwr-regulators@c {
+ compatible = "st,stm32mp1,pwr-reg";
+ st,tzcr = <&rcc 0x0 0x1>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
new file mode 100644
index 0000000..a3f4762
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -0,0 +1,68 @@
+STMicroelectronics STPMIC1 Voltage regulators
+
+Regulator Nodes are optional depending on needs.
+
+Available Regulators in STPMIC1 device are:
+ - buck1 for Buck BUCK1
+ - buck2 for Buck BUCK2
+ - buck3 for Buck BUCK3
+ - buck4 for Buck BUCK4
+ - ldo1 for LDO LDO1
+ - ldo2 for LDO LDO2
+ - ldo3 for LDO LDO3
+ - ldo4 for LDO LDO4
+ - ldo5 for LDO LDO5
+ - ldo6 for LDO LDO6
+ - vref_ddr for LDO Vref DDR
+ - boost for Buck BOOST
+ - pwr_sw1 for VBUS_OTG switch
+ - pwr_sw2 for SW_OUT switch
+
+Switches are fixed voltage regulators with only enable/disable capability.
+
+Optional properties:
+- st,mask-reset: mask reset for this regulator: the regulator configuration
+ is maintained during pmic reset.
+- regulator-pull-down: enable high pull down
+ if not specified light pull down is used
+- regulator-over-current-protection:
+ if set, all regulators are switched off in case of over-current detection
+ on this regulator,
+ if not set, the driver only sends an over-current event.
+- interrupt-parent: phandle to the parent interrupt controller
+- interrupts: index of current limit detection interrupt
+- <regulator>-supply: phandle to the parent supply/regulator node
+ each regulator supply can be described except vref_ddr.
+
+Example:
+regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo6-supply = <&v3v3>;
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ interrupts = <IT_CURLIM_BUCK1 0>;
+ interrupt-parent = <&pmic>;
+ st,mask-reset;
+ regulator-pull-down;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ interrupts = <IT_CURLIM_BUCK4 0>;
+ interrupt-parent = <&mypmic>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-over-current-protection;
+ };
+};
diff --git a/Documentation/devicetree/bindings/remoteproc/rproc-srm.txt b/Documentation/devicetree/bindings/remoteproc/rproc-srm.txt
new file mode 100644
index 0000000..dce10c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/rproc-srm.txt
@@ -0,0 +1,57 @@
+Remoteproc System Resource Manager
+----------------------------------
+
+The remoteproc SRM (System Resource Manager) handles resources allocated
+to remote processors.
+This makes it possible for remote proc to reserve and initialize system
+resources for a peripheral assigned to a coprocessor.
+
+The devices are grouped in a core node
+
+Core
+====
+Required properties:
+- compatible: should be "rproc-srm-core"
+
+Dev
+===
+Required properties:
+- compatible: should be "rproc-srm-dev"
+
+Optional properties:
+- reg: register base address and length
+- clocks: clocks required by the coprocessor
+- clock-names: see clock-bindings.txt
+- pinctrl-x: pins configurations required by the coprocessor
+- pinctrl-names: see pinctrl-bindings.txt.
+ "rproc_default" is a special pin configuration which is applied except
+ if the 'early-booted' property is set.
+ In a general way, it is recommended to use names prefixed with "rproc_".
+- x-supply: power supplies required by the coprocessor
+- interrupts: see interrupts.txt
+- interrupt-parent: see interrupts.txt
+- interrupt-names: see interrupts.txt
+
+Example:
+ system_resources {
+ compatible = "rproc-srm-core";
+
+ mmc0: sdhci@09060000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x09060000 0x100>;
+ pinctrl-names = "rproc_default", "rproc_idle";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ pinctrl-1 = <&pinctrl_mmc1>;
+ clock-names = "mmc", "icn";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+ <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
+ vdda-supply = <&vdda>;
+ };
+
+ button {
+ compatible = "rproc-srm-dev";
+ interrupt-parent = <&gpioa>;
+ interrupts = <5 1>;
+ interrupt-names = "gpio_key";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt b/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
new file mode 100644
index 0000000..ee00f1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/stm32-rproc.txt
@@ -0,0 +1,78 @@
+STMicroelectronics STM32 Remoteproc
+-----------------------------------
+This document defines the binding for the remoteproc component that loads and
+boots firmwares on the ST32MP family chipset.
+
+Required properties:
+- compatible: Must be "st,stm32mp1-rproc"
+- reg: Should contain the address ranges for specific internal memory
+ regions.
+- reg-names: Should contain the corresponding names for specific internal
+ memory regions.
+- resets: Reference to a reset controller asserting the remote processor.
+- reset-names: Must be "mcu_rst"
+- st,syscfg-holdboot: Reference to the system configuration controlling the
+ remote processor reset hold boot
+ 1st cell: phandle of syscon block
+ 2nd cell: register offset containing the hold boot setting
+ 3rd cell: register bitmask for the hold boot field
+- st,syscfg-tz: Reference to the system configuration controlling the trust zone
+ mode
+ 1st cell: phandle to syscon block
+ 2nd cell: register offset containing the trust zone mode setting
+ 3rd cell: register bitmask for the trust zone mode bit
+
+Optional properties:
+- interrupt-parent: phandle to the interrupt controller node.
+- interrupts: Should contain the watchdog interrupt
+- interrupt-names: Must be "wdg"
+- mboxes: List of phandle and mailbox channel specifiers:
+ - a channel (a) used to communicate through virtqueues with the
+ remote proc.
+ Bi-directional channel:
+ - from local to remote = send message
+ - from remote to local = send message ack
+ - a channel (b) working the opposite direction of channel (a)
+ - a channel (c) used for two different purposes:
+ - used by the remote proc to signal when it has completed
+ its critical initalisation.
+ Mono-directional channel: from remote to local
+ - used by the local proc to notify the remote proc that it
+ is about to be shut down.
+ Mono-directional channel: from local to remote, where ACK
+ from the remote means that it is ready for shutdown
+- mbox-names: This property is required if the mboxes property is used.
+ - must be "vq0" for channel (a)
+ - must be "vq1" for channel (b)
+ - must be "init_shdn" for channel (c)
+- memory-region: phandle to the reserved memory node to be associated with the
+ remoteproc device.
+- st,syscfg-pdds: Reference to the system configuration controlling the remote
+ processor deep sleep setting
+ 1st cell: phandle to syscon block
+ 2nd cell: register offset containing the deep sleep setting
+ 3rd cell: register bitmask for the deep sleep bit
+- auto_boot: If defined, when remoteproc is probed, it looks for a default
+ firmware and if it finds some, it loads the firmware and starts
+ the remote processor.
+- recovery: If defined, remoteproc enables the crash recovery process.
+- early-booted: If defined, when remoteproc tries to boot a firmware, it
+ considers that the remote processor is already running and
+ attaches to this hardware state and updates accordingly (state,
+ resources, ...)
+- rsc-address: Resource table address of the early-booted firmware. Meaningful
+ only if 'early-booted' is defined.
+- rsc-size: Resource table size of the early-booted firmware. Meaningful
+ only if 'early-booted' is defined.
+
+Example:
+ m4_rproc: m4 {
+ compatible = "st,stm32mp1-rproc";
+ reg = <0x38000000 0x10000>,
+ <0x10000000 0x40000>;
+ reg-names = "retram", "mcusram";
+ resets = <&rcc MCU_R>;
+ reset-names = "mcu_rst";
+ st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+ st,syscfg-tz = <&rcc 0x000 0x1>;
+ };
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index 130ca5b..bab0df8 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -21,9 +21,14 @@ Required properties:
domain (RTC registers) write protection.
It is required on stm32(f4/f7/h7).
-Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7):
+Optional properties:
+* to override default rtc_ck parent clock on stm32(f4/f7/h7):
- assigned-clocks: reference to the rtc_ck clock entry.
- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
+* to select and enable RTC Low Speed Clock Output on stm32mp1:
+- st,lsco: defines the RTC output on which RTC Low-Speed Clock is Output. The
+ valid output values are defined in <dt-bindings/rtc/rtc-stm32.h>.
+- pinctrl state named "default" may be defined to reserve pin for RTC output.
Example:
@@ -58,4 +63,7 @@ Example:
clock-names = "pclk", "rtc_ck";
interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>,
<&exti 19 1>;
+ st,lsco = <RTC_OUT2_RMP>;
+ pinctrl-0 = <&rtc_out2_rmp_pins_a>;
+ pinctrl-names = "default";
};
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
index 9d3efed..90ba52f 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
+++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
@@ -10,15 +10,48 @@ Required properties:
- interrupts:
- The interrupt line for the USART instance,
- An optional wake-up interrupt.
+- interrupt-names: Contains "event" for the USART interrupt line.
- clocks: The input clock of the USART instance
Optional properties:
-- pinctrl: The reference on the pins configuration
+- pinctrl-names: Set to "default". An additional "sleep" state can be defined
+ to set pins in sleep state when in low power. In case the device is used as
+ a wakeup source, "idle" state is defined in order to keep RX pin active.
+ For a console device, an optional state "no_console_suspend" can be defined
+ to enable console messages during suspend. Typically, "no_console_suspend" and
+ "default" states can refer to the same pin configuration.
+- pinctrl-n: Phandle(s) pointing to pin configuration nodes.
+ For Pinctrl properties see ../pinctrl/pinctrl-bindings.txt
- st,hw-flow-ctrl: bool flag to enable hardware flow control.
- rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low,
linux,rs485-enabled-at-boot-time: see rs485.txt.
- dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt
- dma-names: "rx" and/or "tx"
+- wakeup-source: bool flag to indicate this device has wakeup capabilities
+- interrupt-names : Should contain "wakeup" if optional wake-up interrupt is
+ used.
+
+Note for dma using:
+- "tx" dma can be used without any constraint since it uses single
+dma transfers.
+- "rx" dma using requires some attention:
+ 1) if you cannot anticipate the length of your received packets
+ and if your usart device embeds an internal fifo, then DON'T use
+ dma mode.
+ 2) if you enable dma mode WITHOUT mdma intermediate copy (cf.
+ stm32-dma.txt), then the availability of the received data will
+ depend on the dma driver policy and it may be delayed until dma
+ internal fifo is full. The usart driver will see this checking
+ the dma residue when rx interrupt (RXNE or RTO) occurs.
+ 3) if you enable dma mode WITH mdma intermediate copy (cf.
+ stm32-dma.txt) then the usart driver will never see the dma
+ residue becoming smaller than RX_BUF_P but it will get its
+ rx dma complete callback called when the cyclic transfer period
+ (RX_BUF_P) is reached.
+The three possibilities above are ordered from the most cpu time
+consuming one to the least one. The counterpart of this optimisation
+is the reception granularity achievable by the usart driver, from
+one byte up to RX_BUF_P.
Examples:
usart4: serial@40004c00 {
@@ -26,8 +59,11 @@ usart4: serial@40004c00 {
reg = <0x40004c00 0x400>;
interrupts = <52>;
clocks = <&clk_pclk1>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
pinctrl-0 = <&pinctrl_usart4>;
+ pinctrl-1 = <&pinctrl_usart4_sleep>;
+ pinctrl-2 = <&pinctrl_usart4_idle>;
+ pinctrl-3 = <&pinctrl_usart4>;
};
usart2: serial@40004400 {
diff --git a/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
new file mode 100644
index 0000000..adeeb63
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-stm32-qspi.txt
@@ -0,0 +1,44 @@
+* STMicroelectronics Quad Serial Peripheral Interface(QSPI)
+
+Required properties:
+- compatible: should be "st,stm32f469-qspi"
+- reg: the first contains the register location and length.
+ the second contains the memory mapping address and length
+- reg-names: should contain the reg names "qspi" "qspi_mm"
+- interrupts: should contain the interrupt for the device
+- clocks: the phandle of the clock needed by the QSPI controller
+- A pinctrl must be defined to set pins in mode of operation for QSPI transfer
+
+Optional properties:
+- resets: must contain the phandle to the reset controller.
+
+A spi flash (NOR/NAND) must be a child of spi node and could have some
+properties. Also see jedec,spi-nor.txt.
+
+Required properties:
+- reg: chip-Select number (QSPI controller may connect 2 flashes)
+- spi-max-frequency: max frequency of spi bus
+
+Optional property:
+- spi-rx-bus-width: see ./spi-bus.txt for the description
+
+Example:
+
+qspi: spi@a0001000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0xa0001000 0x1000>, <0x90000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ interrupts = <91>;
+ resets = <&rcc STM32F4_AHB3_RESET(QSPI)>;
+ clocks = <&rcc 0 STM32F4_AHB3_CLOCK(QSPI)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
new file mode 100644
index 0000000..7cc1407
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
@@ -0,0 +1,11 @@
+STMicroelectronics STPMIC1 Watchdog
+
+Required properties:
+
+- compatible : should be "st,stpmic1-wdt"
+
+Example:
+
+watchdog {
+ compatible = "st,stpmic1-wdt";
+};
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de..b264fa0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -922,6 +922,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32mp157a-dk1.dtb \
+ stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index c485127..4409db2 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -24,8 +24,7 @@
reg = <0x0 0x400>;
clocks = <&rcc GPIOA>;
st,bank-name = "GPIOA";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
+ status = "disabled";
};
gpiob: gpio@50003000 {
@@ -36,8 +35,7 @@
reg = <0x1000 0x400>;
clocks = <&rcc GPIOB>;
st,bank-name = "GPIOB";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
+ status = "disabled";
};
gpioc: gpio@50004000 {
@@ -48,8 +46,7 @@
reg = <0x2000 0x400>;
clocks = <&rcc GPIOC>;
st,bank-name = "GPIOC";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
+ status = "disabled";
};
gpiod: gpio@50005000 {
@@ -60,8 +57,7 @@
reg = <0x3000 0x400>;
clocks = <&rcc GPIOD>;
st,bank-name = "GPIOD";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
+ status = "disabled";
};
gpioe: gpio@50006000 {
@@ -72,8 +68,7 @@
reg = <0x4000 0x400>;
clocks = <&rcc GPIOE>;
st,bank-name = "GPIOE";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
+ status = "disabled";
};
gpiof: gpio@50007000 {
@@ -84,8 +79,7 @@
reg = <0x5000 0x400>;
clocks = <&rcc GPIOF>;
st,bank-name = "GPIOF";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
+ status = "disabled";
};
gpiog: gpio@50008000 {
@@ -96,8 +90,7 @@
reg = <0x6000 0x400>;
clocks = <&rcc GPIOG>;
st,bank-name = "GPIOG";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
+ status = "disabled";
};
gpioh: gpio@50009000 {
@@ -108,8 +101,7 @@
reg = <0x7000 0x400>;
clocks = <&rcc GPIOH>;
st,bank-name = "GPIOH";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
+ status = "disabled";
};
gpioi: gpio@5000a000 {
@@ -120,8 +112,7 @@
reg = <0x8000 0x400>;
clocks = <&rcc GPIOI>;
st,bank-name = "GPIOI";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 128 16>;
+ status = "disabled";
};
gpioj: gpio@5000b000 {
@@ -132,8 +123,7 @@
reg = <0x9000 0x400>;
clocks = <&rcc GPIOJ>;
st,bank-name = "GPIOJ";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 144 16>;
+ status = "disabled";
};
gpiok: gpio@5000c000 {
@@ -144,8 +134,29 @@
reg = <0xa000 0x400>;
clocks = <&rcc GPIOK>;
st,bank-name = "GPIOK";
- ngpios = <8>;
- gpio-ranges = <&pinctrl 0 160 8>;
+ status = "disabled";
+ };
+
+ adc1_in6_pins_a: adc1-in6 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+ };
+ };
+
+ adc12_ain_pins_a: adc12-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+ <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+ };
+ };
+
+ adc12_usb_pwr_pins_a: adc12-usb-pwr-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+ <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+ };
};
cec_pins_a: cec-0 {
@@ -157,6 +168,57 @@
};
};
+ dac_ch1_pins_a: dac-ch1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+ };
+ };
+
+ dac_ch2_pins_a: dac-ch2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+ };
+ };
+
+ dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
+ };
+ };
+
+ dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
+ };
+ };
+
+ dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
+ };
+ };
+
+ dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
+ };
+ };
+
+ dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -203,6 +265,50 @@
};
};
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ fmc_sleep_pins_a: fmc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+ <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+ };
+ };
+
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -213,6 +319,13 @@
};
};
+ i2c1_pins_sleep_a: i2c1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -223,6 +336,13 @@
};
};
+ i2c2_pins_sleep_a: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
i2c5_pins_a: i2c5-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -233,6 +353,14 @@
};
};
+ i2c5_pins_sleep_a: i2c5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -246,6 +374,32 @@
};
};
+ m_can1_sleep_pins_a: m_can1-sleep@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
+ pwm1_pins_a: pwm1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_a: pwm1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+ };
+ };
+
pwm2_pins_a: pwm2-0 {
pins {
pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -255,6 +409,74 @@
};
};
+ pwm2_sleep_pins_a: pwm2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+ };
+ };
+
+ pwm3_pins_a: pwm3-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm3_sleep_pins_a: pwm3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+ };
+ };
+
+ pwm4_pins_a: pwm4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_a: pwm4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+ };
+ };
+
+ pwm4_pins_b: pwm4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_b: pwm4-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+ };
+ };
+
+ pwm5_pins_a: pwm5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm5_sleep_pins_a: pwm5-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+ };
+ };
+
pwm8_pins_a: pwm8-0 {
pins {
pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
@@ -264,6 +486,12 @@
};
};
+ pwm8_sleep_pins_a: pwm8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+ };
+ };
+
pwm12_pins_a: pwm12-0 {
pins {
pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
@@ -273,6 +501,12 @@
};
};
+ pwm12_sleep_pins_a: pwm12-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+ };
+ };
+
qspi_clk_pins_a: qspi-clk-0 {
pins {
pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
@@ -282,6 +516,12 @@
};
};
+ qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+ };
+ };
+
qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
@@ -300,6 +540,16 @@
};
};
+ qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+ <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ };
+ };
+
qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
@@ -318,6 +568,180 @@
};
};
+ qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+ <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+ };
+ };
+
+ rtc_out2_rmp_pins_a: rtc-out2-rmp-pins@0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
+ sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, AF10)>, /* SDMMC3_CK */
+ <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+ };
+ };
+
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -330,6 +754,131 @@
bias-disable;
};
};
+
+ uart4_idle_pins_a: uart4-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_sleep_pins_a: uart4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+ };
+
+ usart2_pins_a: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_idle_pins_a: usart2-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_a: usart2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ };
+
+ usart3_pins_a: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_idle_pins_a: usart3-idle-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_sleep_pins_a: usart3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+ <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+ };
+ };
+
+ usart3_pins_b: usart3-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart3_idle_pins_b: usart3-idle-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_sleep_pins_b: usart3-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+ <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+ };
+ };
};
pinctrl_z: pin-controller-z@54004000 {
@@ -350,8 +899,7 @@
clocks = <&rcc GPIOZ>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
+ status = "disabled";
};
i2c4_pins_a: i2c4-0 {
@@ -364,6 +912,13 @@
};
};
+ i2c4_pins_sleep_a: i2c4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+ };
+ };
+
spi1_pins_a: spi1-0 {
pins1 {
pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
new file mode 100644
index 0000000..866eed7
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157c-m4-srm.dtsi"
+#include "stm32mp157cac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
+ compatible = "st,stm32mp157a-dk1", "st,stm32mp157";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ipc_share: sram_rproc@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x10000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_temp>;
+ };
+
+ sram: sram@10050000 {
+ compatible = "mmio-sram";
+ reg = <0x10050000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10050000 0x10000>;
+
+ dma_pool: dma_pool@0 {
+ reg = <0x0 0x10000>;
+ pool;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+ blue {
+ label = "heartbeat";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc12_usb_pwr_pins_a>;
+ vref-supply = <&vrefbuf>;
+ status = "okay";
+ adc1: adc@0 {
+ /*
+ * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+ * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+ * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+ * Use arbitrary margin here (e.g. 5µs).
+ */
+ st,min-sample-time-nsecs = <5000>;
+ /* ANA0, ANA1, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 18 19>;
+ status = "okay";
+ };
+ adc2: adc@100 {
+ /* ANA0, ANA1, temp sensor, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 12 18 19>;
+ /* temperature sensor min sample time */
+ st,min-sample-time-nsecs = <10000>;
+ status = "okay";
+ };
+ adc_temp: temp {
+ status = "okay";
+ };
+};
+
+&dma1 {
+ sram = <&dma_pool>;
+};
+
+&dma2 {
+ sram = <&dma_pool>;
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c4_pins_a>;
+ pinctrl-1 = <&i2c4_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&pwr 0 IRQ_TYPE_EDGE_FALLING 1>,
+ <&exti 55 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <2>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <2>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&m4_rproc {
+ memory-region = <&ipc_share>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "init_shdn";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ interrupt-names = "wdg";
+ recovery;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,negedge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&timers1 {
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm1_pins_a>;
+ pinctrl-1 = <&pwm1_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm3_pins_a>;
+ pinctrl-1 = <&pwm3_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@2 {
+ status = "okay";
+ };
+};
+
+&timers4 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+ pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@3 {
+ status = "okay";
+ };
+};
+
+&timers5 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm5_pins_a>;
+ pinctrl-1 = <&pwm5_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@4 {
+ status = "okay";
+ };
+};
+
+&timers6 {
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ timer@5 {
+ status = "okay";
+ };
+};
+
+&timers12 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer@11 {
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ pinctrl-3 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
new file mode 100644
index 0000000..4175b65
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+#include <dt-bindings/rtc/rtc-stm32.h>
+
+/ {
+ model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
+ compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+};
+
+&rtc {
+ st,lsco = <RTC_OUT2_RMP>;
+ pinctrl-0 = <&rtc_out2_rmp_pins_a>;
+ pinctrl-names = "default";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index f77bea4..1b074e9 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -6,7 +6,10 @@
/dts-v1/;
#include "stm32mp157c.dtsi"
-#include "stm32mp157-pinctrl.dtsi"
+#include "stm32mp157c-m4-srm.dtsi"
+#include "stm32mp157caa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter";
@@ -20,41 +23,251 @@
reg = <0xC0000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ipc_share: sram_rproc@10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x10000>;
+ no-map;
+ };
+ };
+
aliases {
serial0 = &uart4;
};
- reg11: reg11 {
- compatible = "regulator-fixed";
- regulator-name = "reg11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc_temp>;
};
- reg18: reg18 {
- compatible = "regulator-fixed";
- regulator-name = "reg18";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
+ sram: sram@10050000 {
+ compatible = "mmio-sram";
+ reg = <0x10050000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x10050000 0x10000>;
+
+ dma_pool: dma_pool@0 {
+ reg = <0x0 0x10000>;
+ pool;
+ };
};
- vdd_usb: vdd-usb {
- compatible = "regulator-fixed";
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ led {
+ compatible = "gpio-leds";
+ blue {
+ label = "heartbeat";
+ gpios = <&gpiod 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
};
};
-&i2c4 {
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ vref-supply = <&vdda>;
+ status = "okay";
+ adc1: adc@0 {
+ st,adc-channels = <0 1>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-nsecs = <400>;
+ status = "okay";
+ };
+ jadc1: jadc@0 {
+ st,adc-channels = <0 1>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-nsecs = <400>;
+ status = "okay";
+ };
+ /* temperature sensor on adc2 */
+ adc2: adc@100 {
+ status = "okay";
+ };
+ adc_temp: temp {
+ status = "okay";
+ };
+};
+
+&dac {
pinctrl-names = "default";
+ pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+ vref-supply = <&vdda>;
+ status = "okay";
+ dac1: dac@1 {
+ status = "okay";
+ };
+ dac2: dac@2 {
+ status = "okay";
+ };
+};
+
+&dma1 {
+ sram = <&dma_pool>;
+};
+
+&dma2 {
+ sram = <&dma_pool>;
+};
+
+&i2c4 {
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_pins_a>;
+ pinctrl-1 = <&i2c4_pins_sleep_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&pwr 0 IRQ_TYPE_EDGE_FALLING 1>,
+ <&exti 55 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <2>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <2>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
};
&iwdg2 {
@@ -62,6 +275,17 @@
status = "okay";
};
+&m4_rproc {
+ memory-region = <&ipc_share>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "init_shdn";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ interrupt-names = "wdg";
+ recovery;
+ status = "okay";
+};
+
&rng1 {
status = "okay";
};
@@ -70,16 +294,51 @@
status = "okay";
};
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,negedge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
&timers6 {
status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
timer@5 {
status = "okay";
};
};
&uart4 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep", "idle", "no_console_suspend";
pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ pinctrl-3 = <&uart4_pins_a>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 372bc2e..fe59c6d 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/input/input.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -16,9 +17,46 @@
};
aliases {
- serial0 = &uart4;
+ serial1 = &usart3;
ethernet0 = &ethernet0;
};
+
+ joystick {
+ compatible = "gpio-keys";
+ #size-cells = <0>;
+ pinctrl-0 = <&joystick_pins>;
+ pinctrl-names = "default";
+ button-0 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-1 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-2 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-3 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-4 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
};
&ethernet0 {
@@ -46,37 +84,85 @@
status = "okay";
};
+&fmc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&fmc_pins_a>;
+ pinctrl-1 = <&fmc_sleep_pins_a>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand: nand@0 {
+ reg = <0>;
+ nand-on-flash-bbt;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
&i2c2 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_pins_a>;
+ pinctrl-1 = <&i2c2_pins_sleep_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ stmfx: stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+ vdd-supply = <&v3v3>;
+
+ stmfx_pinctrl: stmfx-pin-controller {
+ compatible = "st,stmfx-0300-pinctrl";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-down;
+ };
+ };
+ };
};
&i2c5 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_pins_a>;
+ pinctrl-1 = <&i2c5_pins_sleep_a>;
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
};
&m_can1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&m_can1_pins_a>;
+ pinctrl-1 = <&m_can1_sleep_pins_a>;
status = "okay";
};
&qspi {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: mx66l51235l@0 {
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
@@ -85,6 +171,7 @@
};
flash1: mx66l51235l@1 {
+ compatible = "jedec,spi-nor";
reg = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
@@ -101,9 +188,13 @@
&timers2 {
status = "disabled";
+ /* spare dmas for other usage (un-delete to enable pwm capture) */
+ /delete-property/dmas;
+ /delete-property/dma-names;
pwm {
pinctrl-0 = <&pwm2_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm2_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@1 {
@@ -113,9 +204,12 @@
&timers8 {
status = "disabled";
+ /delete-property/dmas;
+ /delete-property/dma-names;
pwm {
pinctrl-0 = <&pwm8_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm8_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@7 {
@@ -125,9 +219,12 @@
&timers12 {
status = "disabled";
+ /delete-property/dmas;
+ /delete-property/dma-names;
pwm {
pinctrl-0 = <&pwm12_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer@11 {
@@ -135,6 +232,14 @@
};
};
+&usart3 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&usart3_pins_a>;
+ pinctrl-1 = <&usart3_sleep_pins_a>;
+ pinctrl-2 = <&usart3_idle_pins_a>;
+ status = "disabled";
+};
+
&usbh_ehci {
phys = <&usbphyc_port0>;
phy-names = "usb";
diff --git a/arch/arm/boot/dts/stm32mp157c-m4-srm.dtsi b/arch/arm/boot/dts/stm32mp157c-m4-srm.dtsi
new file mode 100644
index 0000000..a1d132d0
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-m4-srm.dtsi
@@ -0,0 +1,436 @@
+&m4_rproc {
+ m4_system_resources {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ m4_timers2: timer@40000000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc TIM2_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers3: timer@40001000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc TIM3_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers4: timer@40002000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc TIM4_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers5: timer@40003000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40003000 0x400>;
+ clocks = <&rcc TIM5_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers6: timer@40004000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40004000 0x400>;
+ clocks = <&rcc TIM6_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers7: timer@40005000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40005000 0x400>;
+ clocks = <&rcc TIM7_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers12: timer@40006000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40006000 0x400>;
+ clocks = <&rcc TIM12_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers13: timer@40007000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40007000 0x400>;
+ clocks = <&rcc TIM13_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers14: timer@40008000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40008000 0x400>;
+ clocks = <&rcc TIM14_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_lptimer1: timer@40009000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40009000 0x400>;
+ clocks = <&rcc LPTIM1_K>;
+ clock-names = "mux";
+ status = "disabled";
+ };
+ m4_spi2: spi@4000b000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000b000 0x400>;
+ clocks = <&rcc SPI2_K>;
+ status = "disabled";
+ };
+ m4_i2s2: audio-controller@4000b000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000b000 0x400>;
+ status = "disabled";
+ };
+ m4_spi3: spi@4000c000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000c000 0x400>;
+ clocks = <&rcc SPI3_K>;
+ status = "disabled";
+ };
+ m4_i2s3: audio-controller@4000c000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000c000 0x400>;
+ status = "disabled";
+ };
+ m4_spdifrx: audio-controller@4000d000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000d000 0x400>;
+ clocks = <&rcc SPDIF_K>;
+ clock-names = "kclk";
+ status = "disabled";
+ };
+ m4_usart2: serial@4000e000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000e000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <27 1>;
+ clocks = <&rcc USART2_K>;
+ status = "disabled";
+ };
+ m4_usart3: serial@4000f000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4000f000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <28 1>;
+ clocks = <&rcc USART3_K>;
+ status = "disabled";
+ };
+ m4_uart4: serial@40010000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40010000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <30 1>;
+ clocks = <&rcc UART4_K>;
+ status = "disabled";
+ };
+ m4_uart5: serial@40011000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40011000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <31 1>;
+ clocks = <&rcc UART5_K>;
+ status = "disabled";
+ };
+ m4_i2c1: i2c@40012000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40012000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <21 1>;
+ clocks = <&rcc I2C1_K>;
+ status = "disabled";
+ };
+ m4_i2c2: i2c@40013000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40013000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <22 1>;
+ clocks = <&rcc I2C2_K>;
+ status = "disabled";
+ };
+ m4_i2c3: i2c@40014000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40014000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <23 1>;
+ clocks = <&rcc I2C3_K>;
+ status = "disabled";
+ };
+ m4_i2c5: i2c@40015000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40015000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <25 1>;
+ clocks = <&rcc I2C5_K>;
+ status = "disabled";
+ };
+ m4_cec: cec@40016000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40016000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <69 1>;
+ clocks = <&rcc CEC_K>, <&rcc CK_LSE>;
+ clock-names = "cec", "hdmi-cec";
+ status = "disabled";
+ };
+ m4_dac: dac@40017000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40017000 0x400>;
+ clocks = <&rcc DAC12>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+ m4_uart7: serial@40018000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40018000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <32 1>;
+ clocks = <&rcc UART7_K>;
+ status = "disabled";
+ };
+ m4_uart8: serial@40019000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x40019000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <33 1>;
+ clocks = <&rcc UART8_K>;
+ status = "disabled";
+ };
+ m4_timers1: timer@44000000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44000000 0x400>;
+ clocks = <&rcc TIM1_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers8: timer@44001000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44001000 0x400>;
+ clocks = <&rcc TIM8_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_usart6: serial@44003000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44003000 0x400>;
+ interrupt-parent = <&exti>;
+ interrupts = <29 1>;
+ clocks = <&rcc USART6_K>;
+ status = "disabled";
+ };
+ m4_spi1: spi@44004000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44004000 0x400>;
+ clocks = <&rcc SPI1_K>;
+ status = "disabled";
+ };
+ m4_i2s1: audio-controller@44004000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44004000 0x400>;
+ status = "disabled";
+ };
+ m4_spi4: spi@44005000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44005000 0x400>;
+ clocks = <&rcc SPI4_K>;
+ status = "disabled";
+ };
+ m4_timers15: timer@44006000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44006000 0x400>;
+ clocks = <&rcc TIM15_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers16: timer@44007000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44007000 0x400>;
+ clocks = <&rcc TIM16_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_timers17: timer@44008000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44008000 0x400>;
+ clocks = <&rcc TIM17_K>;
+ clock-names = "int";
+ status = "disabled";
+ };
+ m4_spi5: spi@44009000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x44009000 0x400>;
+ clocks = <&rcc SPI5_K>;
+ status = "disabled";
+ };
+ m4_sai1: sai@4400a000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400a000 0x4>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ status = "disabled";
+ };
+ m4_sai2: sai@4400b000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400b000 0x4>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ status = "disabled";
+ };
+ m4_sai3: sai@4400c000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400c000 0x4>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ status = "disabled";
+ };
+ m4_dfsdm: dfsdm@4400d000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400d000 0x800>;
+ clocks = <&rcc DFSDM_K>;
+ clock-names = "dfsdm";
+ status = "disabled";
+ };
+ m4_m_can1: can@4400e000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ status = "disabled";
+ };
+ m4_m_can2: can@4400f000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ status = "disabled";
+ };
+ m4_dma1: dma@48000000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x48000000 0x400>;
+ clocks = <&rcc DMA1>;
+ status = "disabled";
+ };
+ m4_dma2: dma@48001000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x48001000 0x400>;
+ clocks = <&rcc DMA2>;
+ status = "disabled";
+ };
+ m4_dmamux1: dma-router@48002000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x48002000 0x1c>;
+ clocks = <&rcc DMAMUX>;
+ status = "disabled";
+ };
+ m4_adc: adc@48003000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x48003000 0x400>;
+ clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+ clock-names = "bus", "adc";
+ status = "disabled";
+ };
+ m4_sdmmc3: sdmmc@48004000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x48004000 0x400>, <0x48005000 0x400>;
+ clocks = <&rcc SDMMC3_K>;
+ status = "disabled";
+ };
+ m4_usbotg_hs: usb-otg@49000000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x49000000 0x10000>;
+ clocks = <&rcc USBO_K>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+ m4_hash2: hash@4c002000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4c002000 0x400>;
+ clocks = <&rcc HASH2>;
+ status = "disabled";
+ };
+ m4_rng2: rng@4c003000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4c003000 0x400>;
+ clocks = <&rcc RNG2_K>;
+ status = "disabled";
+ };
+ m4_crc2: crc@4c004000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4c004000 0x400>;
+ clocks = <&rcc CRC2>;
+ status = "disabled";
+ };
+ m4_cryp2: cryp@4c005000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4c005000 0x400>;
+ clocks = <&rcc CRYP2>;
+ status = "disabled";
+ };
+ m4_dcmi: dcmi@4c006000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x4c006000 0x400>;
+ clocks = <&rcc DCMI>;
+ clock-names = "mclk";
+ status = "disabled";
+ };
+ m4_lptimer2: timer@50021000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x50021000 0x400>;
+ clocks = <&rcc LPTIM2_K>;
+ clock-names = "mux";
+ status = "disabled";
+ };
+ m4_lptimer3: timer@50022000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x50022000 0x400>;
+ clocks = <&rcc LPTIM3_K>;
+ clock-names = "mux";
+ status = "disabled";
+ };
+ m4_lptimer4: timer@50023000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x50023000 0x400>;
+ clocks = <&rcc LPTIM4_K>;
+ clock-names = "mux";
+ status = "disabled";
+ };
+ m4_lptimer5: timer@50024000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x50024000 0x400>;
+ clocks = <&rcc LPTIM5_K>;
+ clock-names = "mux";
+ status = "disabled";
+ };
+ m4_sai4: sai@50027000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x50027000 0x4>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ status = "disabled";
+ };
+ m4_qspi: qspi@58003000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ clocks = <&rcc QSPI_K>;
+ status = "disabled";
+ };
+ m4_ethernet0: ethernet@5800a000 {
+ compatible = "rproc-srm-dev";
+ reg = <0x5800a000 0x2000>;
+ clock-names = "stmmaceth",
+ "mac-clk-tx",
+ "mac-clk-rx",
+ "ethstp",
+ "syscfg-clk";
+ clocks = <&rcc ETHMAC>,
+ <&rcc ETHTX>,
+ <&rcc ETHRX>,
+ <&rcc ETHSTP>,
+ <&rcc SYSCFG>;
+ status = "disabled";
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 185541a..b4bae4d 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -29,10 +29,8 @@
};
psci {
- compatible = "arm,psci";
+ compatible = "arm,psci-1.0";
method = "smc";
- cpu_off = <0x84000002>;
- cpu_on = <0x84000003>;
};
intc: interrupt-controller@a0021000 {
@@ -84,6 +82,26 @@
};
};
+ pm_domain {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32mp157c-pd";
+
+ pd_core_ret: core-ret-power-domain@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ #power-domain-cells = <0>;
+ label = "CORE-RETENTION";
+
+ pd_core: core-power-domain@2 {
+ reg = <2>;
+ #power-domain-cells = <0>;
+ label = "CORE";
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -98,6 +116,12 @@
reg = <0x40000000 0x400>;
clocks = <&rcc TIM2_K>;
clock-names = "int";
+ dmas = <&dmamux1 18 0x400 0x5>,
+ <&dmamux1 19 0x400 0x5>,
+ <&dmamux1 20 0x400 0x5>,
+ <&dmamux1 21 0x400 0x5>,
+ <&dmamux1 22 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up";
status = "disabled";
pwm {
@@ -119,6 +143,13 @@
reg = <0x40001000 0x400>;
clocks = <&rcc TIM3_K>;
clock-names = "int";
+ dmas = <&dmamux1 23 0x400 0x5>,
+ <&dmamux1 24 0x400 0x5>,
+ <&dmamux1 25 0x400 0x5>,
+ <&dmamux1 26 0x400 0x5>,
+ <&dmamux1 27 0x400 0x5>,
+ <&dmamux1 28 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -140,6 +171,11 @@
reg = <0x40002000 0x400>;
clocks = <&rcc TIM4_K>;
clock-names = "int";
+ dmas = <&dmamux1 29 0x400 0x5>,
+ <&dmamux1 30 0x400 0x5>,
+ <&dmamux1 31 0x400 0x5>,
+ <&dmamux1 32 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4";
status = "disabled";
pwm {
@@ -161,6 +197,13 @@
reg = <0x40003000 0x400>;
clocks = <&rcc TIM5_K>;
clock-names = "int";
+ dmas = <&dmamux1 55 0x400 0x5>,
+ <&dmamux1 56 0x400 0x5>,
+ <&dmamux1 57 0x400 0x5>,
+ <&dmamux1 58 0x400 0x5>,
+ <&dmamux1 59 0x400 0x5>,
+ <&dmamux1 60 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
status = "disabled";
pwm {
@@ -182,6 +225,8 @@
reg = <0x40004000 0x400>;
clocks = <&rcc TIM6_K>;
clock-names = "int";
+ dmas = <&dmamux1 69 0x400 0x5>;
+ dma-names = "up";
status = "disabled";
timer@5 {
@@ -198,6 +243,8 @@
reg = <0x40005000 0x400>;
clocks = <&rcc TIM7_K>;
clock-names = "int";
+ dmas = <&dmamux1 70 0x400 0x5>;
+ dma-names = "up";
status = "disabled";
timer@6 {
@@ -277,6 +324,7 @@
reg = <0x40009000 0x400>;
clocks = <&rcc LPTIM1_K>;
clock-names = "mux";
+ power-domains = <&pd_core>;
status = "disabled";
pwm {
@@ -308,6 +356,7 @@
dmas = <&dmamux1 39 0x400 0x05>,
<&dmamux1 40 0x400 0x05>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -322,90 +371,131 @@
dmas = <&dmamux1 61 0x400 0x05>,
<&dmamux1 62 0x400 0x05>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
usart2: serial@4000e000 {
compatible = "st,stm32h7-uart";
reg = <0x4000e000 0x400>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 27 1>;
clocks = <&rcc USART2_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
usart3: serial@4000f000 {
compatible = "st,stm32h7-uart";
reg = <0x4000f000 0x400>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 28 1>;
clocks = <&rcc USART3_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
uart4: serial@40010000 {
compatible = "st,stm32h7-uart";
reg = <0x40010000 0x400>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 30 1>;
clocks = <&rcc UART4_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
uart5: serial@40011000 {
compatible = "st,stm32h7-uart";
reg = <0x40011000 0x400>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 31 1>;
clocks = <&rcc UART5_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
i2c1: i2c@40012000 {
compatible = "st,stm32f7-i2c";
reg = <0x40012000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 21 1>;
clocks = <&rcc I2C1_K>;
resets = <&rcc I2C1_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux1 33 0x400 0x05>,
+ <&dmamux1 34 0x400 0x05>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
status = "disabled";
};
i2c2: i2c@40013000 {
compatible = "st,stm32f7-i2c";
reg = <0x40013000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 22 1>;
clocks = <&rcc I2C2_K>;
resets = <&rcc I2C2_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux1 35 0x400 0x05>,
+ <&dmamux1 36 0x400 0x05>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x2>;
status = "disabled";
};
i2c3: i2c@40014000 {
compatible = "st,stm32f7-i2c";
reg = <0x40014000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 23 1>;
clocks = <&rcc I2C3_K>;
resets = <&rcc I2C3_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux1 73 0x400 0x05>,
+ <&dmamux1 74 0x400 0x05>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x4>;
status = "disabled";
};
i2c5: i2c@40015000 {
compatible = "st,stm32f7-i2c";
reg = <0x40015000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 25 1>;
clocks = <&rcc I2C5_K>;
resets = <&rcc I2C5_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmamux1 115 0x400 0x05>,
+ <&dmamux1 116 0x400 0x05>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x10>;
status = "disabled";
};
@@ -415,6 +505,7 @@
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc CEC_K>, <&clk_lse>;
clock-names = "cec", "hdmi-cec";
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -445,16 +536,24 @@
uart7: serial@40018000 {
compatible = "st,stm32h7-uart";
reg = <0x40018000 0x400>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 32 1>;
clocks = <&rcc UART7_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
uart8: serial@40019000 {
compatible = "st,stm32h7-uart";
reg = <0x40019000 0x400>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 33 1>;
clocks = <&rcc UART8_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -465,6 +564,15 @@
reg = <0x44000000 0x400>;
clocks = <&rcc TIM1_K>;
clock-names = "int";
+ dmas = <&dmamux1 11 0x400 0x5>,
+ <&dmamux1 12 0x400 0x5>,
+ <&dmamux1 13 0x400 0x5>,
+ <&dmamux1 14 0x400 0x5>,
+ <&dmamux1 15 0x400 0x5>,
+ <&dmamux1 16 0x400 0x5>,
+ <&dmamux1 17 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -486,6 +594,15 @@
reg = <0x44001000 0x400>;
clocks = <&rcc TIM8_K>;
clock-names = "int";
+ dmas = <&dmamux1 47 0x400 0x5>,
+ <&dmamux1 48 0x400 0x5>,
+ <&dmamux1 49 0x400 0x5>,
+ <&dmamux1 50 0x400 0x5>,
+ <&dmamux1 51 0x400 0x5>,
+ <&dmamux1 52 0x400 0x5>,
+ <&dmamux1 53 0x400 0x5>;
+ dma-names = "ch1", "ch2", "ch3", "ch4",
+ "up", "trig", "com";
status = "disabled";
pwm {
@@ -503,8 +620,12 @@
usart6: serial@44003000 {
compatible = "st,stm32h7-uart";
reg = <0x44003000 0x400>;
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 29 1>;
clocks = <&rcc USART6_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -519,6 +640,7 @@
dmas = <&dmamux1 37 0x400 0x05>,
<&dmamux1 38 0x400 0x05>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -533,6 +655,7 @@
dmas = <&dmamux1 83 0x400 0x05>,
<&dmamux1 84 0x400 0x05>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -543,6 +666,11 @@
reg = <0x44006000 0x400>;
clocks = <&rcc TIM15_K>;
clock-names = "int";
+ dmas = <&dmamux1 105 0x400 0x5>,
+ <&dmamux1 106 0x400 0x5>,
+ <&dmamux1 107 0x400 0x5>,
+ <&dmamux1 108 0x400 0x5>;
+ dma-names = "ch1", "up", "trig", "com";
status = "disabled";
pwm {
@@ -564,6 +692,9 @@
reg = <0x44007000 0x400>;
clocks = <&rcc TIM16_K>;
clock-names = "int";
+ dmas = <&dmamux1 109 0x400 0x5>,
+ <&dmamux1 110 0x400 0x5>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
@@ -584,6 +715,9 @@
reg = <0x44008000 0x400>;
clocks = <&rcc TIM17_K>;
clock-names = "int";
+ dmas = <&dmamux1 111 0x400 0x5>,
+ <&dmamux1 112 0x400 0x5>;
+ dma-names = "ch1", "up";
status = "disabled";
pwm {
@@ -609,6 +743,7 @@
dmas = <&dmamux1 85 0x400 0x05>,
<&dmamux1 86 0x400 0x05>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -684,7 +819,7 @@
m_can1: can@4400e000 {
compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
reg-names = "m_can", "message_ram";
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -704,7 +839,7 @@
interrupt-names = "int0", "int1";
clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
status = "disabled";
};
@@ -723,6 +858,15 @@
#dma-cells = <4>;
st,mem2mem;
dma-requests = <8>;
+ dmas = <&mdma1 0 0x11 0x1200000a 0x48000008 0x00000020 1>,
+ <&mdma1 1 0x11 0x1200000a 0x48000008 0x00000800 1>,
+ <&mdma1 2 0x11 0x1200000a 0x48000008 0x00200000 1>,
+ <&mdma1 3 0x11 0x1200000a 0x48000008 0x08000000 1>,
+ <&mdma1 4 0x11 0x1200000a 0x4800000C 0x00000020 1>,
+ <&mdma1 5 0x11 0x1200000a 0x4800000C 0x00000800 1>,
+ <&mdma1 6 0x11 0x1200000a 0x4800000C 0x00200000 1>,
+ <&mdma1 7 0x11 0x1200000a 0x4800000C 0x08000000 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7";
};
dma2: dma@48001000 {
@@ -740,6 +884,15 @@
#dma-cells = <4>;
st,mem2mem;
dma-requests = <8>;
+ dmas = <&mdma1 8 0x11 0x1200000a 0x48001008 0x00000020 1>,
+ <&mdma1 9 0x11 0x1200000a 0x48001008 0x00000800 1>,
+ <&mdma1 10 0x11 0x1200000a 0x48001008 0x00200000 1>,
+ <&mdma1 11 0x11 0x1200000a 0x48001008 0x08000000 1>,
+ <&mdma1 12 0x11 0x1200000a 0x4800100C 0x00000020 1>,
+ <&mdma1 13 0x11 0x1200000a 0x4800100C 0x00000800 1>,
+ <&mdma1 14 0x11 0x1200000a 0x4800100C 0x00200000 1>,
+ <&mdma1 15 0x11 0x1200000a 0x4800100C 0x08000000 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7";
};
dmamux1: dma-router@48002000 {
@@ -784,10 +937,61 @@
interrupts = <1>;
dmas = <&dmamux1 10 0x400 0x01>;
dma-names = "rx";
+ /* temperature sensor */
+ st,adc-channels = <12>;
+ st,min-sample-time-nsecs = <10000>;
+ status = "disabled";
+ };
+
+ jadc1: jadc@0 {
+ compatible = "st,stm32mp1-adc";
+ st,injected;
+ #io-channel-cells = <1>;
+ reg = <0x0>;
+ interrupt-parent = <&adc>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ jadc2: jadc@100 {
+ compatible = "st,stm32mp1-adc";
+ st,injected;
+ #io-channel-cells = <1>;
+ reg = <0x100>;
+ interrupt-parent = <&adc>;
+ interrupts = <4>;
+ /* temperature sensor */
+ st,adc-channels = <12>;
+ st,min-sample-time-nsecs = <10000>;
+ status = "disabled";
+ };
+
+ adc_temp: temp {
+ compatible = "st,stm32mp1-adc-temp";
+ io-channels = <&adc2 12>;
+ nvmem-cells = <&ts_cal1>, <&ts_cal2>;
+ nvmem-cell-names = "ts_cal1", "ts_cal2";
+ #io-channel-cells = <0>;
+ #thermal-sensor-cells = <0>;
status = "disabled";
};
};
+ sdmmc3: sdmmc@48004000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x48004000 0x400>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC3_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC3_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
usbotg_hs: usb-otg@49000000 {
compatible = "snps,dwc2";
reg = <0x49000000 0x10000>;
@@ -800,6 +1004,23 @@
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
dr_mode = "otg";
+ power-domains = <&pd_core>;
+ status = "disabled";
+ };
+
+ ipcc: mailbox@4c001000 {
+ compatible = "st,stm32mp1-ipcc";
+ #mbox-cells = <1>;
+ reg = <0x4c001000 0x400>;
+ st,proc-id = <0>;
+ interrupts-extended =
+ <&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 61 1>;
+ interrupt-names = "rx", "tx", "wakeup";
+ clocks = <&rcc IPCC>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -808,6 +1029,41 @@
reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ st,pwr = <&pwr>;
+ };
+
+ pwr: pwr@50001000 {
+ compatible = "st,stm32mp1-pwr", "syscon", "simple-mfd";
+ reg = <0x50001000 0x400>;
+
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pwr-regulators {
+ compatible = "st,stm32mp1,pwr-reg";
+ st,tzcr = <&rcc 0x0 0x1>;
+
+ reg11: reg11 {
+ regulator-name = "reg11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ reg18: reg18 {
+ regulator-name = "reg18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ usb33: usb33 {
+ regulator-name = "usb33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
exti: interrupt-controller@5000d000 {
@@ -829,6 +1085,7 @@
reg = <0x50021000 0x400>;
clocks = <&rcc LPTIM2_K>;
clock-names = "mux";
+ power-domains = <&pd_core>;
status = "disabled";
pwm {
@@ -856,6 +1113,7 @@
reg = <0x50022000 0x400>;
clocks = <&rcc LPTIM3_K>;
clock-names = "mux";
+ power-domains = <&pd_core>;
status = "disabled";
pwm {
@@ -876,6 +1134,7 @@
reg = <0x50023000 0x400>;
clocks = <&rcc LPTIM4_K>;
clock-names = "mux";
+ power-domains = <&pd_core>;
status = "disabled";
pwm {
@@ -890,6 +1149,7 @@
reg = <0x50024000 0x400>;
clocks = <&rcc LPTIM5_K>;
clock-names = "mux";
+ power-domains = <&pd_core>;
status = "disabled";
pwm {
@@ -923,7 +1183,7 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc HASH1>;
resets = <&rcc HASH1_R>;
- dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>;
+ dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0 0x0>;
dma-names = "in";
dma-maxburst = <2>;
status = "disabled";
@@ -942,11 +1202,30 @@
reg = <0x58000000 0x1000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc MDMA>;
- #dma-cells = <5>;
+ #dma-cells = <6>;
dma-channels = <32>;
dma-requests = <48>;
};
+ fmc: nand-controller@58002000 {
+ compatible = "st,stm32mp15-fmc2";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x1000>,
+ <0x88010000 0x1000>,
+ <0x88020000 0x1000>,
+ <0x81000000 0x1000>,
+ <0x89010000 0x1000>,
+ <0x89020000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma1 20 0x10 0x12000A02 0x0 0x0 0>,
+ <&mdma1 20 0x10 0x12000A08 0x0 0x0 0>,
+ <&mdma1 21 0x10 0x12000A0A 0x0 0x0 0>;
+ dma-names = "tx", "rx", "ecc";
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+ };
+
qspi: qspi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
@@ -957,6 +1236,36 @@
status = "disabled";
};
+ sdmmc1: sdmmc@58005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x58005000 0x1000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC1_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: sdmmc@58007000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x10153180>;
+ reg = <0x58007000 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&rcc SDMMC2_K>;
+ clock-names = "apb_pclk";
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
crc1: crc@58009000 {
compatible = "st,stm32f7-crc";
reg = <0x58009000 0x400>;
@@ -974,8 +1283,12 @@
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
reg-names = "stmmaceth";
- interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 70 1>;
+ interrupt-names = "macirq",
+ "eth_wake_irq",
+ "stm32_pwr_wakeup";
clock-names = "stmmaceth",
"mac-clk-tx",
"mac-clk-rx",
@@ -991,6 +1304,7 @@
snps,pbl = <2>;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -1065,8 +1379,12 @@
usart1: serial@5c000000 {
compatible = "st,stm32h7-uart";
reg = <0x5c000000 0x400>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 26 1>;
clocks = <&rcc USART1_K>;
+ wakeup-source;
+ power-domains = <&pd_core>;
status = "disabled";
};
@@ -1078,22 +1396,29 @@
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc SPI6_K>;
resets = <&rcc SPI6_R>;
- dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
- <&mdma1 35 0x0 0x40002 0x0 0x0>;
+ dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0x0>,
+ <&mdma1 35 0x0 0x40002 0x0 0x0 0x0>;
dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
status = "disabled";
};
i2c4: i2c@5c002000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c002000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 24 1>;
clocks = <&rcc I2C4_K>;
resets = <&rcc I2C4_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&mdma1 36 0x0 0x40008 0x0 0x0 0>,
+ <&mdma1 37 0x0 0x40002 0x0 0x0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x8>;
status = "disabled";
};
@@ -1102,20 +1427,76 @@
reg = <0x5c004000 0x400>;
clocks = <&rcc RTCAPB>, <&rcc RTC>;
clock-names = "pclk", "rtc_ck";
- interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 19 1>;
status = "disabled";
};
+ bsec: nvmem@5c005000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
i2c6: i2c@5c009000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c009000 0x400>;
- interrupt-names = "event", "error";
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "event", "error", "wakeup";
+ interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&exti 54 1>;
clocks = <&rcc I2C6_K>;
resets = <&rcc I2C6_R>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&mdma1 38 0x0 0x40008 0x0 0x0 0>,
+ <&mdma1 39 0x0 0x40002 0x0 0x0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd_core>;
+ st,syscfg-fmp = <&syscfg 0x4 0x20>;
+ status = "disabled";
+ };
+
+ tamp: tamp@5c00a000 {
+ compatible = "simple-bus", "syscon", "simple-mfd";
+ reg = <0x5c00a000 0x400>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x150>; /* reg20 */
+ mask = <0xff>;
+ mode-normal = <0>;
+ mode-fastboot = <0x1>;
+ mode-recovery = <0x2>;
+ mode-stm32cubeprogrammer = <0x3>;
+ mode-ums_mmc0 = <0x10>;
+ mode-ums_mmc1 = <0x11>;
+ mode-ums_mmc2 = <0x12>;
+ };
+ };
+ };
+
+ m4_rproc: m4@0 {
+ compatible = "st,stm32mp1-rproc";
+ reg = <0x38000000 0x10000>,
+ <0x10000000 0x40000>;
+ reg-names = "retram", "mcusram";
+ resets = <&rcc MCU_R>;
+ reset-names = "mcu_rst";
+ st,syscfg-pdds = <&pwr 0x014 0x1>;
+ st,syscfg-holdboot = <&rcc 0x10C 0x1>;
+ st,syscfg-tz = <&rcc 0x000 0x1>;
+ status = "disabled";
+
+ m4_system_resources {
+ compatible = "rproc-srm-core";
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/stm32mp157caa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157caa-pinctrl.dtsi
new file mode 100644
index 0000000..9b9cd08
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157caa-pinctrl.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP157CAA>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ st,package = <STM32MP157CAA>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157cab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157cab-pinctrl.dtsi
new file mode 100644
index 0000000..c570cf9
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157cab-pinctrl.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP157CAB>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157cac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157cac-pinctrl.dtsi
new file mode 100644
index 0000000..777f991
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157cac-pinctrl.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP157CAC>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ st,package = <STM32MP157CAC>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157cad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157cad-pinctrl.dtsi
new file mode 100644
index 0000000..c4c303a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157cad-pinctrl.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP157CAD>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+ };
+ };
+};
--
2.7.4
Reference in New Issue View Git Blame Copy Permalink