153 lines
5.5 KiB
Plaintext
153 lines
5.5 KiB
Plaintext
Compilation of U-Boot:
|
|
1. Pre-requisite
|
|
2. Initialise cross-compilation via SDK
|
|
3. Prepare U-Boot source code
|
|
4. Management of U-Boot source code
|
|
5. Compile U-Boot source code
|
|
6. Update software on board
|
|
|
|
1. Pre-requisite:
|
|
-----------------
|
|
OpenSTLinux SDK must be installed.
|
|
|
|
For U-Boot build you need to install:
|
|
* libncurses and libncursesw dev package
|
|
- Ubuntu: sudo apt-get install libncurses5-dev libncursesw5-dev
|
|
- Fedora: sudo yum install ncurses-devel
|
|
* git:
|
|
- Ubuntu: sudo apt-get install git-core gitk
|
|
- Fedora: sudo yum install git
|
|
|
|
If you have never configured you git configuration:
|
|
$ git config --global user.name "your_name"
|
|
$ git config --global user.email "your_email@example.com"
|
|
|
|
2. Initialize cross-compilation via SDK:
|
|
---------------------------------------
|
|
* Source SDK environment:
|
|
$ source <path to SDK>/environment-setup-cortexa7t2hf-neon-vfpv4-ostl-linux-gnueabi
|
|
|
|
* To verify if you cross-compilation environment are put in place:
|
|
$ set | grep CROSS
|
|
CROSS_COMPILE=arm-ostl-linux-gnueabi-
|
|
|
|
Warning: the environment are valid only on the shell session where you have
|
|
sourced the sdk environment.
|
|
|
|
3. Prepare U-Boot source:
|
|
------------------------
|
|
|
|
Extract the sources from tarball, for example:
|
|
$ tar xfJ SOURCES-st-image-weston-openstlinux-weston-stm32mp1-*.tar.xz
|
|
|
|
In the U-Boot source directory (sources/*/##BP##-##PR##),
|
|
you have one U-Boot source tarball, the patches and one Makefile:
|
|
- ##BP##-##PR##.tar.gz
|
|
- 000*.patch
|
|
- Makefile.sdk
|
|
|
|
NB: if you would like to have a git management on the code see
|
|
section 4 [Management of U-Boot source code with GIT]
|
|
|
|
Then you must extract the tarball and apply the patch:
|
|
|
|
$> tar xfz ##BP##-##PR##.tar.gz
|
|
$> cd ##BP##
|
|
$> for p in `ls -1 ../*.patch`; do patch -p1 < $p; done
|
|
|
|
4. Management of U-Boot source code with GIT
|
|
--------------------------------------------
|
|
If you like to have a better management of change made on U-Boot source,
|
|
you have 3 solutions to use git
|
|
|
|
4.1 Get STMicroelectronics U-Boot source from GitHub
|
|
|
|
URL: https://github.com/STMicroelectronics/u-boot.git
|
|
Branch: v##PV##-stm32mp
|
|
Revision: v##PV##-stm32mp-##PR##
|
|
|
|
$ git clone https://github.com/STMicroelectronics/u-boot.git
|
|
$ git checkout -b WORKING v##PV##-stm32mp-##PR##
|
|
|
|
4.2 Create Git from tarball
|
|
|
|
$ tar xfz ##BP##-##PR##.tar.gz
|
|
$ cd ##BP##
|
|
$ test -d .git || git init . && git add . && git commit -m "U-Boot source code" && git gc
|
|
$ git checkout -b WORKING
|
|
$ for p in `ls -1 ../*.patch`; do git am $p; done
|
|
|
|
4.3 Get Git from community and apply STMicroelectronics patches
|
|
|
|
URL: git://git.denx.de/u-boot.git
|
|
Branch: master
|
|
Revision: v##PV##
|
|
|
|
$ git clone git://git.denx.de/u-boot.git
|
|
or
|
|
$ git clone http://git.denx.de/u-boot.git
|
|
|
|
$ cd u-boot
|
|
$ git checkout -b WORKING v##PV##
|
|
$ for p in `ls -1 ../*.patch`; do git am $p; done
|
|
|
|
5. Compilation U-Boot source code:
|
|
----------------------------------
|
|
To compile U-Boot source code, first move to U-Boot source:
|
|
$ cd ##BP##
|
|
or
|
|
$ cd u-boot
|
|
|
|
5.1 Compilation for one target (one defconfig, one device tree) - and no FIP
|
|
|
|
see <U-Boot source>/board/st/stm32mp1/README for details
|
|
|
|
$ make stm32mp15_<config>_defconfig
|
|
$ make DEVICE_TREE=<device tree> all
|
|
|
|
example:
|
|
|
|
a) trusted boot on ev1
|
|
$ make stm32mp15_trusted_defconfig
|
|
$ make DEVICE_TREE=stm32mp157c-ev1 all
|
|
|
|
b) basic boot on dk2
|
|
$ make stm32mp15_basic_defconfig
|
|
$ make DEVICE_TREE=stm32mp157c-dk2 all
|
|
|
|
5.2 Compilation for several targets: use Makefile.sdk (with FIP)
|
|
Calls the specific 'Makefile.sdk' provided to compile U-Boot:
|
|
- Display 'Makefile.sdk' file default configuration and targets:
|
|
$ make -f $PWD/../Makefile.sdk help
|
|
As mentionned in help, OpenSTLinux has activated FIP by default, so the FIP_artifacts should be specified
|
|
- In case of using SOURCES-xxxx.tar.gz of Developer package the FIP_DEPLOYDIR_ROOT should be set as below:
|
|
$> export FIP_DEPLOYDIR_ROOT=$PWD/../../FIP_artifacts
|
|
|
|
- Compile default U-Boot configuration:
|
|
$> make -f $PWD/../Makefile.sdk all
|
|
|
|
Default U-Boot configuration is done in 'Makefile.sdk' file through two specific
|
|
variables 'DEVICE_TREE' and 'UBOOT_CONFIGS':
|
|
- 'DEVICE_TREE' is a list of device tree to build, using 'space' as separator.
|
|
ex: DEVICE_TREE="<devicetree1> <devicetree2>"
|
|
- 'UBOOT_CONFIGS' is a list of '<defconfig>,<type>,<binary>' configurations,
|
|
<defconfig> is the u-boot defconfig to use to build
|
|
<type> is the name append to u-boot binaries (ex: 'trusted', 'basic', etc)
|
|
<binary> is the u-boot binary to export (ex: 'u-boot.bin', 'u-boot.stm32', etc)
|
|
ex: UBOOT_CONFIGS="<defconfig1>,basic,u-boot.bin <defconfig1>,trusted,u-boot.stm32"
|
|
|
|
The generated FIP images are available in $FIP_DEPLOYDIR_ROOT/fip
|
|
|
|
You can override the default U-Boot configuration if you specify these variables:
|
|
- Compile default U-Boot configuration but applying specific devicetree(s):
|
|
$ make -f $PWD/../Makefile.sdk all DEVICE_TREE="<devicetree1> <devicetree2>"
|
|
- Compile for a specific U-Boot configuration:
|
|
$ make -f $PWD/../Makefile.sdk all UBOOT_CONFIGS=<u-boot defconfig>,<u-boot type>,<u-boot binary>
|
|
- Compile for a specific U-Boot configuration and applying specific devicetree(s):
|
|
$ make -f $PWD/../Makefile.sdk all UBOOT_CONFIGS=<u-boot defconfig>,<u-boot type>,<u-boot binary> DEVICE_TREE="<devicetree1> <devicetree2>"
|
|
|
|
6. Update software on board:
|
|
----------------------------
|
|
Please use STM32CubeProgrammer and only tick the ssbl-boot and fip partition (more informations on the wiki website http://wiki.st.com/stm32mpu)
|
|
|