distcheck tests that all the files are installed under $prefix. That
doesn't work with the systemd unit directory since the path comes from
pkg-config. Override the setting to be under $prefix in that case.
Closes: #372
Approved by: cgwalters
On some systems there may be no root= argument, so the tests for
appending /proc/cmdline arguments will fail. Instead, loop over each of
the arguments in the host's /proc/cmdline and test that they're in the
constructed config file. That will actually test if ostree added all of
the system's /proc/cmdline args correctly. The regex isn't perfect here,
but it's probably good enough for this test.
Closes: #372
Approved by: cgwalters
When creating sysroots with libostreetest, we don't get the benefit of
the OSTREE_SYSROOT_DEBUG setting in libtest.sh. That means we'll get
immutable deployments that can't be easily cleaned up.
Ensure the environment variable is set before creating new sysroots. It
would be nice to set the debug flags directly, but that's private API
that isn't currently pulled into libostreetest.
Closes: #372
Approved by: cgwalters
I've seen a few people hit this and wonder why checkouts are slow/take
space. Really, ensuring this happens is the *point* of OSTree.
Physical copies should be a last resort fallback for very unusual
situations (one of those is rpm-ostree checking out the db since
librpm doesn't know how to read from libostree).
Even I hit the fact that `/var` is a mountpoint disallowing hardlinks
with `/ostree` once and was confused. =)
Add this to the rofiles-fuse test case because it creates a mount
point.
Closes: #368
Approved by: jlebon
The program is called ro*files* and ostree creates physical
copies of directories, so changing them is fine.
I hit this when trying to do a copy checkout onto an rofiles-fuse
mount.
Closes: #368
Approved by: jlebon
libtoolize creates a version of libtool for the right architecture
in $(top_builddir), which is guaranteed to be present, and is
guaranteed to match what we are compiling (even during
cross-compilation).
Packaging systems sometimes separate /usr/bin/libtool, which is
specific to one architecture, from the libtool development files
such as libtoolize and ltmain.sh, which are architecture-independent.
For example, in Debian, libtool_*_all.deb contains the files necessary
to libtoolize a package and is depended on by the dh-autoreconf package,
but libtool-bin_*_amd64.deb (or whatever architecture) contains
/usr/bin/libtool and is not normally necessary to depend on.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #367
Approved by: cgwalters
Add the functionality to use the same name for refs in local and remote
repos. This helps users keep track of local refs of remote origin, much
like local and remote git branches.
Previously, when a local ref is specified, resolve_refspec would fall
back to searching through remote repos if the ref is not found locally.
This function now takes an extra flag to specify whether it should
search through remote repos. Additionally, ostree_repo_resove_rev_ext
was added to call resolve_refspec with fallback_remote being false, so
refs --create would no longer complain when trying to create a local
ref of the same name as a remote one.
Fix remote repo parsing not being handled correctly on refs --create.
Closes: #363
Approved by: jlebon
In flatpak i was using a parent repo, and it failed to update
with ENOENT when dispatching an set-read-source opcode, because the
object it referenced was in the parent repo.
This fixes that by making _ostree_repo_read_bare_fd look
at parent_repo.
Closes: #362
Approved by: cgwalters
We noticed that once a ref folder is created, there is no existing
command that can remove it. For example, once "foo/bar" is created,
even if the user deletes foo or all the refs under foo, the folder
will persist.
Now when the user attempts to create a ref "foo" either through commit
or refs --create, if a folder "foo" exists but is empty of refs, the
folder is removed and the new ref "foo" is created.
New unit tests in tests-ref.sh verify this functionality.
Closes: #354
Approved by: cgwalters
Import `gs_file_enumerator_iterate()` for the next six months or
so...after RHEL 7.3 is released I'm strongly considering hard
requiring 2.46 or so.
Likely at some point we should figure out how to share more "glib
backport" code with NetworkManager at least.
Closes: #341
Approved by: jlebon
This was the last caller of libgsystem that isn't
`gs_file_get_path_cached()`. I think the use case ostree has where
the same code can be called via command line and via a shared library
*and* via a daemon is rather unusual, so let's just copy the code for
logging from libgsystem into here.
For example rpm-ostree hard depends on a daemon mode, so it'll just
use `sd_journal` directly.
Closes: #341
Approved by: jlebon
I was easily reproducing a hang on pulls with thousands of requests on
current git master. The initial symptom seemed to be that there are
multiple code paths where we don't invoke
`session_thread_process_pending_queue()`. We really need to do
that any time we remove something from the outstanding queue,
to ensure it gets filled again.
A further issue is that we were tying the lifecycle of the pending
object to the `GTask`, but the task could be unref'd from the main
thread (via a `GSource` on the main thread), and that introduced
threadsafety issues, because the hash table and other data suddenly
could be concurrently modified.
Both of these need to be fixed together. First, we introduce
`Arc<Pending>`, and ensure that both the main and worker threads hold
references.
Second, we ensure that we re-process the queue *immediately* whenever
a task is done, inside the worker thread, rather than doing it
incidentally via an unref. This architecture is quite similar to what
the outside pull code is doing.
Closes: #350
Approved by: jlebon
For some reason I'm really not inclined to debug right now, `libtool`
is eating the `-fsanitize=address` argument when linking
`libreaddir-rand.so`, which causes failures since we're trying to
`LD_PRELOAD`.
Closes: #351
Approved by: jlebon
It's unfortunate that in automake one has to explicitly include the globa
`$(AM_CFLAGS)` if one sets `CFLAGS`, and similarly for other variables.
I'm trying to use `-fsanitize=address`, and not including it was
causing linker failures.
We also weren't inheriting the global warnings etc., so I had to fix a
decl-after-statement.
Closes: #351
Approved by: jlebon
The previous code was subject to a divide by zero if less than a
second had passed. Rework it so we only do the divide if more than a
second has passed.
Closes: #349
Approved by: Mathnerd314
We noticed the temp files being left over in ostree when (mistakenly)
trying to create refs with names in use by folders. This fix removes
temp files created by glnx_file_replace_contents_at on failure.
Closes: #348
Approved by: cgwalters
I find the "-z2" is really a long ago relic of the past when I changed
the format. We no longer have anything to do with the original
`archive`, so let's start allowing people to type `--mode=archive`
which just looks saner.
At some point later I'll update the docs too, but it'll be an annoying
transition period as we'll have to say "On older OSTree, use -z2" etc.
Closes: #346
Approved by: giuseppe
Added the ability to create a ref (much like a git tag) for an
existing commit through "ostree refs EXISTING --create=NEWREF".
Previously the only way to create a new ref was by creating a new commit,
but refs --create allows multiple refs to point to the same commit.
The command will fail if:
- None/more than one existing ref is specified
- The specified EXISTING tag does not exist, or was not specified
- The specified NEWREF already exists, or is the name of a folder
Add unit tests in tests-ref.sh to verify above functionality
Closes: #340
Approved by: jlebon
Just noticed this while reading some code, we didn't have many manual
`out: close()` bits left, this pushes us over the edge to autocleanup
almost everywhere.
Closes: #332
Approved by: jlebon
The filename of the real ostree executable could be either .libs/ostree
or .libs/lt-ostree.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #337
Approved by: cgwalters
Otherwise, during "make distcheck" it will be read-only (because it
is a copy of the read-only ${srcdir} with permissions preserved), and
deletion will fail during cleanup.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #337
Approved by: cgwalters
This avoids hard-coding the autogen-time ${srcdir} into our build
system, and might fix "make distcheck".
We don't need to specify ${srcdir} explicitly in the various variables,
because Automake always uses make's VPATH feature to look in both
${builddir} and ${srcdir} at build time.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #337
Approved by: cgwalters
It uses dlsym(). There's no point in being extra-portable here
because OSTree only targets Linux anyway.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #336
Approved by: cgwalters
As with the C tests in commit 08580118, this makes sure the test
fails as soon as something goes wrong.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #335
Approved by: giuseppe
Dan Nicholson
Jonathan Lebon
Colin Walters
Simon McVittie
Alexander Larsson
Yu Qi Zhang
Mathnerd314
Krzesimir Nowak