We use the "exhaustive enum" pattern (i.e. no `default:`) in some places so
we're forced to touch all users when adding cases.
Closes: #1167
Approved by: peterbaouoft
If the new configuration passed to ostree_write_config () tries to
update options for a remote defined in a separate config file, return an
error. Without this, the full configuration would contain duplicate
remote specifications, which would raise an error the next time the repo
is opened.
Closes: #1159
Approved by: cgwalters
Subcommands will demand a repo argument themselves. This allows one to
call `ostree remote` and get the "No subcommand" error rather than the
"Missing --repo" error.
Closes: #1126
Approved by: cgwalters
There's no need to load the sysroot for root commands which have
subcommands, like `ostree admin` and `ostree admin instutil`. Otherwise,
even just calling them without arguments will cause a failure. The
subcommands will have the appropriate flags set as needed.
Closes: #1126
Approved by: cgwalters
Convert the whole file to new style. Also tweak the help outputs to make
it similar enough to the other commands for tests to pass. Of course, we
should just centralize all subcommand handling the same way it was done
in rpm-ostree, though let's punt on that for now.
Closes: #1126
Approved by: cgwalters
The `sed` expression wasn't actually matching the main output, so we
weren't recursing into the subcommands. Update the syntax to match the
current output and add a check so we don't miss that happening again.
Add a check that the help output is only printed once in all
circumstances. Also add a check for proper handling of non-existent
commands.
Closes: #1126
Approved by: cgwalters
Minor regression from https://github.com/ostreedev/ostree/pull/1106. We
want to print the usage text both when unknown commands are passed, as
well as when no commands are passed at all.
Closes: #1126
Approved by: cgwalters
The new libglnx `glnx_mkdtempat()` uses autocleanups, which
is inconvenient for this use case where we *don't* want autocleanups.
Since we don't need it to be fd-relative, just directly invoke
`g_mkdtemp_full()` which is fine for this use case.
Prep for updating libglnx.
Closes: #1161
Approved by: jlebon
This option allows a repo to explicitly opt out of adding new remotes in
a remotes configuration directory. This currently defaults to true for
system repos and false for non-system repos to maintain legacy behavior
that non-system repos don't add remotes in a configuration directory.
That would be problematic for flatpak, which specifies a remotes config
dir but adds remotes in ways that are incompatible with it.
So, what this really does is allow system repos to control whether they
want to add remotes in the config dir or not. That's important if your
flatpak repo is the system repo like at Endless.
Closes: #1134Closes: #1155
Approved by: cgwalters
If you lchown("symlink") then we were incorrectly trying to chown the
symlink target, rather than the symlink itself. In particular, this cause
cp -a to fail for a broken symlink. Additionally, it was using the
symlink target when verifying writability, rather than the symlink
itself.
To fix this, we need pass AT_SYMLINK_NOFOLLOW in these cases.
In general, the kernel itself will always resolve any symlinks for us
before calling into the fuse backend, so we should really never do any
symlink following in the fuse fs itself. So, we pro-actively add
NOFOLLOW flags to a few other places:
truncate:
In reality this will never be hit, because
the kernel will resolve symlinks before calling us.
access:
It seems the current fuse implementation never calls this
(faccessat w/AT_SYMLINK_NOFOLLOW never reaches the fuse fs)
but if this ever is implemented this is the correct behaviour.
We would ideally do `chmod` but this is not implemented on current kernels.
Because we're not multi-threaded, this is OK anyways.
Further, our write verification wasn't correctly handling the case of hardlinked
symlinks, which can occur for `bare` checkouts but *not* `bare-user` which the
tests were using. Change to `bare` mode to verify that.
Closes: #1137
Approved by: alexlarsson
There was only one tricky bit here around the ownership of the lines; I made use
of `g_steal_pointer()` to consistently track ownership, and converted to a `for`
loop while still preserving the loop logic around the last entry.
Closes: #1154
Approved by: jlebon
Steal some code from flatpak for this, which allows porting a few more things to
new style. I started on a public API version of this but was trying to roll some
other things into it and it snowballed. Let's do this version since it's easy
for now.
While here I changed things so that `generate_deployment_refs()` now just uses
`_set_ref_immediate()` rather than requring a txn.
Also, AFAICS there was no test coverage of `generate_deployment_refs()`; I tried
commenting it out and at least `admin-test.sh` passed. Add some coverage of this
- I verified that with this commenting out bits of that function cause the test
to fail.
Closes: #1132
Approved by: jlebon
I resisted trying to do anything invasive here like fd-relative porting as our
coverage is weak. But this was all straightforward porting to decl-after-stmt
style.
Closes: #1153
Approved by: jlebon
Before commit e0346c1, a non-system repo could specify
remotes-config-dir and have remotes read from there. However, adding
remotes would only be done in the config dir for a system repo. Restore
that by respecting remotes-config-dir when no sysroot is found and
adding back the ostree_repo_is_system() check when adding remotes.
Closes: #1133Closes: #1151
Approved by: cgwalters
Include non-default deployments in the uEnv.txt file imported by
U-Boot. All the configurations beside the defaults will have
numerical suffix E.G. "kernel_image2" or "bootargs2".
Those U-Boot environment variables may be used from interactive boot
prompt or from "altbootcmd" script.
Closes: #1138
Approved by: cgwalters
Split the code that merge the system uEnv to new function. While we're here,
clean up the logic to e.g. use `ot_openat_ignore_enoent()`.
Closes: #1138
Approved by: cgwalters
There were some important ones there like a random `syncfs()`. The remaining
users are mostly blocked on the "fstatat enoent" case, I'll wait to port those.
Closes: #1150
Approved by: jlebon
Add keys from the signing homedir to the GpgVerifier used to look
for duplicate signatures. This will allow signatures from subkeys
to be canonicalised and recognised as already signed despite the
differing key ID, avoiding duplicate signatures.
Closes: https://github.com/ostreedev/ostree/issues/608Closes: #1092
Approved by: cgwalters
In the case the signature time was bad, a line prefix was missing from the
result of `ostree_gpg_verify_result_describe_variant()`.
Closes: #1092
Approved by: cgwalters
Revert the switch of _FINGERPRINT to giving the primary key ID
rather than the signing key ID, and instead add the primary
key ID as a new attribute which is available if the key is not
missing.
Closes: https://github.com/ostreedev/ostree/issues/608Closes: #1092
Approved by: cgwalters
A lof of the functions here are async and have nontrivial exits, but these ones
are all sync were straightforward ports.
Not prep for anything, just chipping away at porting.
Closes: #1146
Approved by: jlebon
We have `ot_ensure_unlinked_at()` for the "ignore ENOENT" case, and
`glnx_unlinkat()` otherwise. Port all in-tree callers to one or the other as
appropriate.
Just noticed an unprefixed error in the refs case and decided to do a tree-wide
check.
Closes: #1142
Approved by: jlebon
I'd mostly been skipping the GPG functions due to lack of autoptr for a few
things, but I noticed these bits were straightforward.
Closes: #1136
Approved by: jlebon
The vast majority of invocations of `ot_gpgme_error_to_gio_error()` were paired
with `g_prefix_error()`; let's combine them for the same reason we do
`glnx_throw_errno_prefix()`. For the few cases that don't we might as well add
some prefix.
I also changed it to `return FALSE` in prep for more style porting.
Closes: #1135
Approved by: jlebon
I was reading the pull-local command docs and realized it was somewhat unclear
that `--untrusted` *only* applied to local repo pulls; in other words that we
always treat non-local pulls as untrusted.
Tweak the docstring, and add tests that verify this explicitly.
Closes: #1130
Approved by: jlebon
However, they weren't showing up in the output HTML and I have
no idea why; I looked at what we're doing and it looks close enough
to what's going on in `GDBusConnection` that I was using as a reference.
I'm not going to spend a lot of time to debug it right now.
Closes: #1140
Approved by: jlebon
Followup from previous patch - we can now centralize the sysroot loading.
Besides the obvious cleanup value, this is also prep for dropping an
`ostree_sysroot_get_path()` user.
Closes: #1123
Approved by: jlebon
This is exactly analogous to the `ostree init` case where
we have `OSTREE_BUILTIN_FLAG_NO_REPO` to avoid trying to load
a repo when we're creating one.
Let's avoid the pointless sysroot for `init-fs`; among other
things this will then let us do `ostree_sysroot_load()` inside
the argument parsing, and drop it from every other user.
Closes: #1123
Approved by: jlebon
Rather than calling `ostree_sysroot_get_path()`, which I'd like to deprecate for
the same reason as `ostree_repo_get_path()`.
Closes: #1123
Approved by: jlebon
In almost all places. There are just a few exceptions; one tricky bit for
example is that the repo config must still have `mode=archive-z2`, since
`archive` used to mean something else. (We could very likely just get rid of
that check, but eh, later).
I also added a test that one can still do `ostree repo init --mode=archive-z2`.
Closes: #1125
Approved by: jlebon
This is for issue projectatomic/rpm-ostree#365,
an extra option of overwrite mode is added to the checkout command
so that when there is "non-directory" file already exist
during checkout, the error will be handled.
Some tests are added for regression
Closes: #1116
Approved by: cgwalters
The new --selinux-policy added in [0] exposed a subtle issue in the way
we handle labeling during commit. The CI system in rpm-ostree hit this
when trying to make use of it[1].
Basically, because of the way we use a GVariant to represent xattrs, if
a file to be committed already has an SELinux label, the xattr object
ends up with *two* label entries. This of course throws off fsck later
on, since the checksum will have gone over both entries, even though the
on-disk file will only have a single label (in which the second entry
wins).
I confirmed that the `fsck` added in the installed test fails without
the rest of this patch.
[0] https://github.com/ostreedev/ostree/pull/1114
[1] https://github.com/projectatomic/rpm-ostree/pull/953Closes: #1121
Approved by: cgwalters
We attempt to make deployments mutable in the test suite (as opposed to
immutable which is the default) to make it easier to chmod and clean up
the tmp files after each test. This is normally accomplished by setting
OSTREE_SYSROOT_DEBUG=mutable-deployments in libtest.sh, but that only
affects the environment variables for that bash instance, not the
process running gjs. So in test-sysroot.js OSTREE_SYSROOT_DEBUG wasn't
set when sysroot.deploy_tree() was called, which means the deployment
was made immutable which eventually causes the test to fail. This only
occurs when the test is run by the root user because for non-root users
_ostree_linuxfs_fd_alter_immutable_flag() would silently fail and the
deployment would be mutable.
This commit fixes this issue by setting the environment variable in
tests/test-sysroot.js.
Closes: #1122
Approved by: cgwalters
Colin Walters
Dan Nicholson
Jonathan Lebon
Matthew Leeds
Alexander Larsson
Guy Shapiro
Robert McQueen
Ruixin