Use the same G_IO_ERROR_* values for HTTP status codes in both fetchers.
The libsoup fetcher still handles a few more internal error codes than
the libcurl one; this could be built on in future.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
Various of the counters already have assertions like this; add some more
for total paranoia.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
This allows the retry code in ostree-repo-pull.c to recover from (for
example) timeouts at the libsoup layer in the stack, as well as from the
GSocket layer in the stack.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
Allow network requests to be re-queued if they failed with a transient
error, such as a socket timeout. Retry each request up to a limit
(default: 5), and only then fail the entire pull and propagate the error
to the caller.
Add a new ostree_repo_pull_with_options() option, n-network-retries, to
control the number of retries (including setting it back to the old
default of 0, if the caller wants).
Currently, retries are not supported for FetchDeltaSuperData requests,
as they are not queued. Once they are queued, adding support for retries
should be trivial. A FIXME comment has been left for this.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1594
Approved by: jlebon
When building the OstreeBloom code against old versions of glib, we have
to have the libglnx headers included so that it defines
G_DEFINE_AUTOPTR_CLEANUP_FUNC and friends for us.
This is similarly true for test-repo-finder-mount.c which indirectly
includes ostree-autocleanups.h.
Closes: #1605
Approved by: cgwalters
This commit rearranges a few things in ostree-repo-pull.c so that OSTree
will successfully compile with experimental API enabled and without
libsoup, libcurl, or avahi:
./autogen.sh --enable-experimental-api --without-soup --without-curl
--without-avahi
This is accomplished with two sets of changes:
1. Move ostree_repo_resolve_keyring_for_collection() so it can be used
even without libsoup or libcurl.
2. Add stub functions for ostree_repo_find_remotes_async() and
ostree_repo_pull_from_remotes_async(), and their _finish() counterparts,
so they return an error when libsoup or libcurl isn't available.
Closes: #1605
Approved by: cgwalters
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make upcoming support
for retrying downloads easier to add.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
Rename from `fdata` to `fetch_data` to clarify things and make it
consistent with other similar functionality in the file.
This introduces no functional changes.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but does make the code a little
cleaner.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes; just makes the code a bit shorter
in a few places.
https://gcc.gnu.org/onlinedocs/gcc/Conditionals.html
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
This introduces no functional changes, but will make some upcoming
refactoring a little easier.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1599
Approved by: jlebon
The initial motivation for this is that the "staging" code currently
didn't rewrite the deployment refs, meaning that the staged commit
could be pruned.
Hence first, this new API ensures that deployments also
hold a strong ref to their commit, without relying on the magical
"deployment refs" that we inject. That has always been a weird
artifact of the strict layering separation between OstreeSysroot
and OstreeRepo.
I also plan to change rpm-ostree to start using this API to
hold references to base layers for client-side layering; it also
today generates various refs.
That said, if we still want to support multiple processes
writing to a single repo (as happens on EndlessOS today) we
still need to write refs; perhaps later we could add a concept
of "generators" or something that create refs based on whatever
logic?
Another minor thing this fixes is that we had a printf inside
the library; this propagates the pruned data to the higher level
which can log however it likes.
Closes: #1566
Approved by: jlebon
Prep for reworking how we do sysroot cleanup. We're going to
start doing more lowlevel pruning work there, and I wanted to avoid
duplicating the ref enumeration.
Closes: #1566
Approved by: jlebon
Likewise the corresponding support for syslinux introduced by commit
c5112c25e4, this one enables writing devicetree
filename into the uEnv.txt environment file for u-boot.
Since u-boot does not strictly defines variable names, here 'fdt_file' was
chosen as it appear to be one the most frequently adopted names in u-boot
default environments. Outer boot logic should of course comply with this choice
and use $fdt_file as the device tree file name to pass to boot commands.
This was tested on a custom board booting with u-boot.
Closes: #1590
Approved by: cgwalters
I feel like I'm drowning in a pile of experimental-but-almost-stable
features...
Anyways, since we made the feature opt-in in rpm-ostree in
https://github.com/projectatomic/rpm-ostree/pull/1352
let's mirror that a bit here with an environment variable so people
can play with it more easily.
The tests needed some tweaks; specifically we need to reload the
status fact after making changes. I'm still a bit uncertain
about the Ansible-as-tests.
But we add an upgrade test that uses the new environment variable.
Closes: #1583
Approved by: jlebon
This should give a more insightful error message if the user provides
a UID which is present on multiple keys.
This happens if you have an old key in your keyring which you are not
actively using any more, e.g. because it is too old. You still have
your old keys in your keyring, because you want to read old email
encrypted for that key, though.
The gpgme function used by ostree right now complains if a UID is found
on multiple keys:
https://www.gnupg.org/documentation/manuals/gpgme/Listing-Keys.html#index-gpgme_005fget_005fkey
The used API is too simple for that use case.
Note that it would be nicer if ostree picked the only valid signing key out
of the available keys rather than using the simplistic gpgme_get_key
function. It be nicer, of course, if there was such a gpgme function.
Closes: #1579
Approved by: cgwalters
Let's add a semi-colon between the "bootconfig swap" part and the
"deployment count change" to make it more clear they're separate
statements.
Closes: #1575
Approved by: cgwalters
While we do a `syncfs()` plus `FIFREEZE/THAW` for `/boot`, that
only comes during deployment finalization.
The code here today generally assumes that if the file exists
it's been fully written. So let's do a `fdatasync()` before
we do the `rename()`.
This just came out of looking through the code while working
on deployment staging. In that scenario there's a much larger
window between when we copy the kernel/initramfs and when we
sync `/boot`.
Closes: #1571
Approved by: jlebon
This is easier to `git grep` etc. versus ad-hoc English. Although
we still have some English for the prepare_transaction/commit which
acquire/release in separate phases.
Closes: #1572
Approved by: jlebon
These are further fixes based on running more of the rpm-ostree
test suite.
When dropping the staged deployment, we do need to do the
"post operations" such as bumping the sysroot mtime, so that
clients know something changed. We also need to regenerate
the deployment refs. And of course do a sysroot reload.
Also, add a "base cleanup" after creating a staged deployment
which also regenerates the refs.
Closes: #1570
Approved by: jlebon
There's no reason to do this. I didn't actually hit this problem,
but it's a corner case that just occurred to me while working on
the code.
I think callers should be adapted to skip trying to use staging
if there's no booted deployment.
Closes: #1568
Approved by: jlebon
This was pointed out in a previous PR review; we don't have
a need for the separate variables. Prep for adding an API for
this.
Closes: #1568
Approved by: jlebon
Doing so can break rpm-ostree, which wants to own the cleanup process
to ensure its baselayer refs are generated.
Further, doing the cleanup at shutdown time adds latency. It's also
going to be generally unnecessary as we expect repo pruning to have
been done when writing the refs.
Closes: #1567
Approved by: jlebon
The code has been sitting around for a while but since I disabled
it by default, I doubt anyone is really using it or relying on it.
This patch and turns on locking by default, and also drops the
API which was only public in the experimental API builds.
Conceptually these are two distinct things, and we
may actually want to split up the patches.
I don't think this will break anyone, but it's hard to say for sure.
It's also going to be hard to find out until we actually release
I suspect...
But anyone who is broken should be able to add `locking=false` into
their repo config. On the flip side Endless has been shipping with
this enabled and it is reported to help.
The reason to drop the APIs: I'm a bit concerned about the interactions over time
between libostree's use of the API and any apps that start using it.
For example, if an app specifies a SHARED lock in their code, then
later internally we decide to temporarily grab an `EXCLUSIVE`, but the
app had a second thread/process that was `EXCLUSIVE` already, and
that process was waiting on the first bit of code, then we could
deadlock. I can't think of a real world situation where this would happen
yet though.
We are likely to in the future have say `fsck` take an external lock,
`checkout` grab a shared one, etc.
Closes: #1555
Approved by: jlebon
Today rpm-ostree has some code to run a "sanitycheck" on a deployment.
I had initially deleted that when adapting it to use the staging code,
but I realized it should work fine; we just won't see the merged
config, but that's OK.
When I readded that code it started crashing because we didn't
actually return the new deployment object. We'll gain some coverage
here as I'll land the code to have rpm-ostree use staging, then bump
the rpm-ostree tests here.
Closes: #1559
Approved by: jlebon
Testing out the staged API with rpm-ostree, ostree-prepare-root.service
in the initramfs was failing. Turned out that was because we didn't
have a `root=` kernel argument. Which was because we didn't have
any kernel arguments at all except `ostree=`.
That in turn was because we weren't loading the bootloader config
from the merge deployment.
The serialized deployment data holds the unique identity of
(osname, checksum, deployserial) - look for the real merge deployment
in our deployment list which has the bootloader arguments we need.
This issue was entirely masked by the `ostree admin deploy` command
which itself explicitly loads the merge deployment's kernel arguments
in every case - it never passes the `NULL` default down. A followup
patch will fix that.
Closes: #1558
Approved by: jlebon
When comparing deployments to determine whether we need a new
bootversion, we should also check whether the commit "version" metadata
is the same. Otherwise, we may end up with the a bootconfig whose
`title` includes a version that doesn't match the one from the
deployment checksum.
Closes: https://github.com/projectatomic/rpm-ostree/issues/1343Closes: #1556
Approved by: cgwalters
This is a normal case when running unit tests in client code
on continuous integration infrastructure. When those tests are
running they will set G_DEBUG=fatal-warnings which will cause
the program to abort if a warning is emitted. Instead, emit
a debug message if the problem was that we couldn't connect to
the daemon.
Closes: #1542
Approved by: jlebon
Followup to: https://github.com/ostreedev/ostree/pull/1503
After starting some more work on on this in rpm-ostree, it is
actually simpler if the staged deployment just shows up in the list.
It's effectively opt-in today; down the line we may make it the default,
but I worry about breaking things that e.g. assume they can mutate
the deployment before rebooting and have `/etc` already merged.
There's not that many things in libostree that iterate over the deployment
list. The biggest change here is around the
`ostree_sysroot_write_deployments_with_options` API. I initially
tried hard to support a use case like "push a rollback" while retaining
the staged deployment, but everything gets very messy because that
function truly is operating on the bootloader list.
For now what I settled on is to just discard the staged deployment;
down the line we can enhance things.
Where we then have some new gymnastics is around implementing
the finalization; we need to go to some effort to pull the staged
deployment out of the list and mark it as unstaged, and then pass
it down to `write_deployments()`.
Closes: #1539
Approved by: jlebon
This is a version of ostree_repo_traverse_commit_union that also
remembers where the objects came from, by recording the parent
relationships in a hashtable. This can be used to later find which
commits each object was from, which we want to use in fsck.
Closes: #1533
Approved by: cgwalters
reintroduce the feature that was reverted with commit:
28c7bc6d0e
Differently than the original implementation, now we don't attempt any
test for reflinks support on the parent repository, since the test
requires write access to the repository.
Additionally, also check that the two repositories are on the same
device before attempting any reflink.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1525
Approved by: cgwalters
In prep for staging work, where we'll need to load the origin
for the staged deployment too.
The function was previously trying to avoid operating on an
instantiated deployment, but the data we need is in the deployment
object at that point.
Closes: #1538
Approved by: jlebon
Prep for handling staged deployments better; if we're not passed
the staged one back, then we just want to delete it but not
touch the bootloader config.
Closes: #1538
Approved by: jlebon
The reason we were returning a hashtable is a bit lost to history,
there's no reason to do so now anyways. Also port to declare-and-initialize
style and add more comments.
Closes: #1538
Approved by: jlebon
Add API to write a deployment state to `/run/ostree/staged-deployment`,
along with a systemd service which runs at shutdown time.
This is a big change to the ostree model for hosts,
but it closes a longstanding set of bugs; many, many people have
hit the "losing changes in /etc" problem. It also avoids
the other problem of racing with programs that modify `/etc`
such as LVM backups:
https://bugzilla.redhat.com/show_bug.cgi?id=1365297
We need this in particular to go to a full-on model for
automatically updated host systems where (like a dual-partition model)
everything is fully prepared and the reboot can be taken
asynchronously.
Closes: https://github.com/ostreedev/ostree/issues/545Closes: #1503
Approved by: jlebon
A newly created archive-mode repository won't have a uncompressed-objects-cache
directory, and uncompressed_objects_dir is -1 to flag that. The special meaning of
-1 meaning "cwd" for libglnx means that the current directory was scanned as
if it was an objects directory, producing unexpected results, especially if there
were any two-letter files/subdirs in the current directory.
Closes: #1537
Approved by: jlebon
Currently OstreeRepoFinderResult, a data structure used by pull code
that supports P2P operations, has a hash table mapping refs to checksums
but doesn't include timestamp information. This means that clients have
no way of knowing just from the OstreeRepoFinderResult information if a
commit being offered by a peer remote is an update or downgrade until
they start pulling it. The client could check the summary or the commit
metadata for the timestamps, but this requires adding the temporary
remotes to the repo config, and ostree is already checking timestamps
before returning the results, so I think it makes more sense for them to
be returned rather than leaving it to the client. This limitation is
especially important for offline computers, because for online computers
the latest commit available from any remote is the latest commit,
period.
This commit adds a "ref_to_timestamp" hash table to
OstreeRepoFinderResult that is symmetric to "ref_to_checksum" in that it
shares the same keys. This is an API break, but it's part of the
experimental API, and none of the current users of that (flatpak,
eos-updater, and gnome-software) are affected. See the documentation for
more details on "ref_to_timestamp". One thing to note is the data
structure currently gets initialized in find_remotes_cb(), so only users
of ostree_repo_find_remotes_async() will get them, not users of, say,
ostree_repo_finder_resolve_all_async(). This is because the individual
OstreeRepoFinder implementations don't currently access the timestamps
(but I think this could be changed in the future if there's a need).
This commit will allow P2P support to be added to
flatpak_installation_list_installed_refs_for_update, which will allow
GNOME Software to update apps from USB drives while offline (it's
already possible online).
Closes: #1518
Approved by: cgwalters
In case of some kind of race or other weirdness we might be getting
non-matching versions of summary.sig and summary, where summary.sig
is the latest version. Currently we're saving them to the cache
directly after downloading them successfully, but they will then fail
to gpg validate. Then on the next run we'll keep using the cached files
even if they are incorrect, until summary.sig changes upstream.
This changes the order so that we verify the signatures before saving
to the cache, thus ensuring that we don't end up in a stuck state.
Fixes https://github.com/ostreedev/ostree/issues/1523Closes: #1529
Approved by: cgwalters
In ostree_repo_remote_fetch_summary_with_options(), if no summary is
found on the server and summary verification is enabled, the error
message implies that it's the summary signature that's missing, which is
misleading. This commit adds a more specific error message for the case
of a missing summary, which has the side effect of explicitly checking
for the case that signatures != NULL && summary == NULL after
repo_remote_fetch_summary(), even though that should never happen.
One effect of this is that if you run "flatpak remote-add" with an
incorrect URL you get a more helpful error message, and similarly for
other flatpak operations and other users of ostree.
Closes: #1522
Approved by: cgwalters
In libostree, the phrase "commit metadata" has two meanings-- one is the
first dictionary in a commit GVariant that stores metadata such as ref
bindings, and the other is the commit metadata in the summary file,
which stores the commit size, checksum, and timestamp. In
find_remotes_process_refs(), the entire commit GVariant was being
referred to as commit metadata, so this commit changes the variable
name and a comment to make things more consistent.
Closes: #1528
Approved by: cgwalters
In _try_clone_from_payload_link, don't try to do the clone in the
parent repo, because we don't want to modify that. parent repos are
typically used when you want a shared, immutable base.
For example in flatpak, the parent repo is the system repo which you
don't have write access to, so any modification to it will fail with
EACCES, making it impossible to install via the system helper.
Closes: #1524
Approved by: cgwalters
ostree_repo_pull_from_remotes_async() passes along some options to
ostree_repo_pull_with_options(), so document them.
Closes: #1519
Approved by: cgwalters
The main blocker for doing this before was the `goto out` handling
for remounting `/boot`. Handle that by factoring out the bits that
require it to a helper function, and do the C/GError equivalent of
"try/finally".
Not prep for anything right now, just decided to do this since I had the file
open.
Closes: #1515
Approved by: jlebon
For staged deploy, we want to pay the cost of creating copies from
`/usr/etc` → `/etc` at stage time, since it can be expensive. (We
want to minimize time spent during shutdown).
Split it up into two functions; the logic is also simply clearer.
Closes: #1514
Approved by: jlebon
Prep for deployment staging. We had the code to hande "explicit kargs" in one
place, but the "use merge deployment" karg bits mixed in with the "/etc merge"
logic. Those are separate things, and it's better to have karg handling in one
place.
Closes: #1514
Approved by: jlebon
A quick turnaround to include one PR: https://github.com/ostreedev/ostree/pull/1508
"switchroot: Ensure /run/ostree-booted is created even without initramfs"
This fixes ostree when booting without an initramfs. Thanks to @akiernan for the
bug report and helping review the fix! I'm working on enhancing
the test suite, which will help in adding some coverage here.
Also for this release I'm going to avoid adding a "stub" symbol section
to the `-released.sym` file; I don't believe it's necessary.
Closes: #1512
Approved by: jlebon
It's been over a month since 2018.2; we have a few features and various fixes,
and the "stage" work pending which is pretty invasive. Time for a new release!
Closes: #1506
Approved by: jlebon
Ensures it's labeled consistently. Prep for staged deployments which reworks the
logic around when the origin file is written.
Closes: #1505
Approved by: jlebon
Pulling some of this out of stage deploy work. It's generally better as it's
easier to change functions to have multiple callers.
Closes: #1505
Approved by: jlebon
We do already have `http-headers`, which potentially could be used to
allow clients to completely override the field, but it seems like the
more common use case is simply to append.
Closes: #1496
Approved by: cgwalters
Allow users to pass `<remote>:` to list all refs we have locally
belonging to `<remote>`. Also (re-)allow the similar `<remote>:.` syntax
for backwards compatibility with flatpak.
Closes: #1500
Approved by: cgwalters
I was looking at this code in prep for "staging" deployments,
and there are several cleanups to be made here. The first
thing I noticed is that we look for the `ostree=` kernel argument,
but the presence of that should be exactly equivalent to having
`/run/ostree-booted` exist. We just added a member variable for
that, so let's make use of it.
Related to this, we were erroring out if we had the karg but
didn't find a deployment. But this can happen if e.g. one is
using `ostree admin --sysroot` from an ostree-booted system! It's
actually a bit surprising no one has reported this so far; I guess
in the end people are either using non-ostree systems or running
from containers.
Let's add a member variable `root_is_sysroot` that we can use
to determine if we're looking at `/`. Then, our more precise
"should find a booted deployment" state is when both `ostree_booted`
and `root_is_sysroot` are TRUE.
Next, rather than walking all of the deployments after parsing,
we can inline the `fstatat()` while parsing. The mild ugly
thing about this is assigning to the sysroot member variable while
parsing, but I will likely clean that up later, just wanted to avoid
rewriting everything in one go.
Closes: #1497
Approved by: jlebon
In ostree_repo_abort_transaction, if we pass a cancellable and it gets
canceled, then the function may fail to fully clean up the transaction
state. This was happening e.g. when the ostree_repo_pull_with_options
call got cancelled.
To fix this, as suggested by Colin Walters, we set the passed
cancellable as NULL, in order for it to be ignored.
https://github.com/ostreedev/ostree/issues/1491Closes: #1492
Approved by: jlebon
Ensure that the metadata object is built up with the signatures from all keys
passed to ostree_repo_add_gpg_signature_summary(). Previously only the signature
from the last key would end up in the metadata.
Closes: #1488Closes: #1489
Approved by: jlebon
When a new object is added to the repository, create a
$PAYLOAD-SHA256.payload-link symlink file as well. The target of the
symlink is the checksum of the object that was added the repository.
Whenever we add a new object file, in addition to lookup if the file is
already present with the same checksum we also check if an object with
the same payload is in the repository.
If a file with the same payload is already present in the repository, we
copy it with `glnx_regfile_copy_bytes` that internally attempts to
create a reflink (ioctl (..., FICLONE, ..)) to the target file if the
file system supports it. This enables to have objects that share the
payload but have a different inode and xattrs.
By default the payload-link-threshold value is G_MAXUINT64 that disables
the feature.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1443
Approved by: cgwalters
It will be used by successive commits to keep track of the payload
checksum for objects stored in the repository.
The goal is that files having the same payload but different xattrs can
take advantage of reflinks where supported.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1443
Approved by: cgwalters
Add some "function global" prefixing in line with what we do in
other places now, and drop the "manual filename" prefixing that
is no longer necessary since
23f7df1500
Closes: https://github.com/ostreedev/ostree/issues/1467Closes: #1485
Approved by: jlebon
The _ostree_repo_get_remote() and _ostree_repo_get_remote_inherited()
methods transfer ownership of the returned OstreeRemote to the caller,
so this commit fixes a few call sites that weren't properly freeing it.
Closes: #1478
Approved by: cgwalters
I think this got changed in a refactor. We definitely want
to total up the amount of space that *would* be freed even
with `--no-prune` AKA `OSTREE_REPO_PRUNE_FLAGS_NO_PRUNE`.
It's actually a bit terrifying this is apparently the first test case for
the `--no-prune` option...
Closes: https://github.com/ostreedev/ostree/issues/1480Closes: #1483
Approved by: jlebon
This updates the gtk-doc comment for OstreeRepoFinderMount to match the
correct flatpak repo path, which was fixed in commit 6db6268df.
Closes: #1473
Approved by: cgwalters
The "ref_original_commits" hash table uses string values, not variants,
so fix the free function passed to g_hash_table_new_full (). Since
g_variant_unref isn't NULL safe, this prevents an assertion failure when
a NULL value is inserted.
Dan Nicholson suggested this patch; I'm just submitting it because he's
busy.
Fixes https://github.com/ostreedev/ostree/issues/1433Closes: #1474
Approved by: cgwalters
If we're booted into a deployment, then any queries for the pending
merge deployment of a non-booted OS will fail due all of them being
considered rollback.
Fix this by filtering by `osname` *before* determining if we've crossed
the booted deployment yet.
Closes: #1472
Approved by: cgwalters
OstreeRepoFinderMount checks mounts for a few well-known directories
such as "ostree/repo" and ".ostree/repo" to try to find remotes. One of
the hard-coded directories is "var/lib/flatpak" but that's the flatpak
directory, not the ostree repo used by flatpak, which is at
"var/lib/flatpak/repo". So this commit changes the path so the repo can
be found.
For recent versions of Endless, flatpak uses /ostree/repo as its
repository, so this commit won't make a difference there. But it may
help on other operating systems.
Closes: #1471
Approved by: cgwalters
Example user story: Jane rebases her OS to a new major version N, and wants to
keep around N-1 even after a few upgrades for a while so she can easily roll
back. I plan to add `rpm-ostree rebase --pin` to opt-in to this for example.
Builds on the new `libostree-transient` group to store pinning state there.
Closes: https://github.com/ostreedev/ostree/issues/1460Closes: #1464
Approved by: jlebon
The `origin/unlocked` and `origin/override-commit` keys are examples of state
that's really transient; we don't want to maintain them across upgrades. Right
now there are bits for this in both `ostree admin upgrade` as well as in
rpm-ostree.
This new API will slightly clean up both cases, but it's really prep for adding
a concept of deployment "pinning" that will live in the new
`libostree-transient` group.
Closes: #1464
Approved by: jlebon
There are enough fixes here, and there are some potentially larger patches
incoming like wmanley's checkout speedups and the payload link that will need
soak time in master.
Closes: #1455
Approved by: jlebon
Since f4d1334e19 the primary pull code maintains a
maximum queue. In that commit message I said `Note that I kept an assertion.`.
But I think this is wrong since while it covers a lot of the normal cases, if
one is e.g. trying to fetch a ton of refs, the primary pull code doesn't yet
queue those. While it'd be nice to queue those, it isn't worth carrying
extra assertions in the backends that can still trigger.
Closes: https://github.com/ostreedev/ostree/issues/1451Closes: #1453
Approved by: dbnicholson
There are a few cases for knowing whether a commit has identical
content to another commit. Some people want to do a "promotion workflow",
where the content of a commit on a tesitng branch is then "promoted"
to a production branch with `ostree commit --tree=ref`.
Another use case I just hit in rpm-ostree deals with
[jigdo](https://github.com/projectatomic/rpm-ostree/issues/1081) where we're
importing RPMs on both the client and server, and will be using the
content checksum, since the client/server cases inject different metadata
into the commit object.
Closes: https://github.com/ostreedev/ostree/issues/1315Closes: #1449
Approved by: jlebon
For P2P pulls ostree adds temporary remotes and removes them in
find_remotes_cb(). However, if an OstreeRepoFinderResult gets freed
during the course of that function, the OstreeRemote in the result is
freed but a pointer to it remains in the remotes_to_remove array. This
means that when _ostree_repo_remove_remote() gets called on it at the
end of the function it will fail. In my case the resulting error was
"OSTree-CRITICAL **: _ostree_repo_remove_remote: assertion 'remote->name
!= NULL' failed" but I think it could also seg fault.
This commit adds a reference to the remote so it can be properly removed
when we're finished with it.
Closes: #1450
Approved by: giuseppe
Having the `uncompressed-object-cache` directory in `archive` repos by default
is clutter; the functionality should be considered deprecated.
Now we only create the directory if we're doing a checkout with the cache
enabled.
Closes: #1446
Approved by: jlebon
This is analogous to the filtering support for the commit API: we allow
library users to skip over checking out specific files. This is useful
in some tricky situations where we *know* that the files to be checked
out will conflict with existing files in subtle ways.
One such example is in rpm-ostree support for multilib. There, we want
to allow checking out a package onto an existing tree, but skipping over
files that are not coloured to our preferred value (e.g. not overwriting
an i686 version of `ldconfig` if we already have the `x86_64` version).
See https://github.com/projectatomic/rpm-ostree/pull/1227 for details.
Closes: #1441
Approved by: cgwalters
When we changed around the kernel location in rpm-ostree, we
started installing the kernel into `/boot` as `modules_object_t`,
and the current policy didn't permit that. For maximum compatibility,
relabel installed kernel/initramfs/dtb as `boot_t`.
https://bugzilla.redhat.com/show_bug.cgi?id=1536991Closes: #1444
Approved by: jlebon
SPDX License List is a list of (common) open source
licenses that can be referred to by a “short identifier”.
It has several advantages compared to the common "license header texts"
usually found in source files.
Some of the advantages:
* It is precise; there is no ambiguity due to variations in license header
text
* It is language neutral
* It is easy to machine process
* It is concise
* It is simple and can be used without much cost in interpreted
environments like java Script, etc.
* An SPDX license identifier is immutable.
* It provides simple guidance for developers who want to make sure the
license for their code is respected
See http://spdx.org for further reading.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1439
Approved by: cgwalters
The old documentation had outdated and incomplete annotations, and
didn’t make it very clear that out_remote could legitimately return
NULL.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1437
Approved by: cgwalters
Currently users of the find_remotes_async()/pull_from_remotes_async()
functions have no way to specify a commit hash to use instead of the
latest one available. This commit implements an "override-commit-ids"
option analogous to the one used by ostree_repo_pull_with_options().
It's accomplished by returning OstreeRepoFinderResult objects pointing
to the given commit checksum(s) regardless of which ones were available
from the remotes, but in the future this implementation could be
improved to take into account the commits advertised by the remotes.
One effect of this is that flatpak will have the ability to downgrade
apps that use collection IDs
(https://github.com/flatpak/flatpak/issues/1309).
Closes: #1425
Approved by: pwithnall
Currently we were parsing `opt_filename` twice...I dug through
the history a bit and it looks like it may have been an accident
from refactoring.
What we're fixing here concretely is that using relative subdirectories
like `--filename somesubdir/foo` broke because we were incorrectly
passing the `somesubdir/` again.
Closes: #1423Closes: #1427
Approved by: jlebon
Prep for further work here. This diff is a bit noisy for the delta bits because
the identation was off originally as well.
Closes: #1424
Approved by: jlebon
Much like the (optional) initramfs at
`/usr/lib/ostree-boot/initramfs-<SHA256>` or
`/usr/lib/modules/$kver/initramfs` you can now optionally include a
flattened devicetree (.dtb) file alongside the kernel at
`/usr/lib/ostree-boot/devicetree-<SHA256>` or
`/usr/lib/modules/$kver/devicetree`.
This is useful for embedded ARM systems which need the devicetree file
loaded by the bootloader for the kernel to discover and initialise
hardware. See https://en.wikipedia.org/wiki/Device_tree for more
information.
This patch was mostly produced by copy-pasting code for initramfs handling
and renaming `s/initramfs/devicetree/g`. It's not beautiful, but it is
fairly straightforward.
It may be useful to extend device-tree support in a number ways in the
future. Device trees dependant on many details of the hardware they
support. This makes them unlike kernels, which may support many different
hardware variants as long as the instruction-set matches. This means that
a ostree tree created with a device-tree in this manner will only boot on
a single model of hardware. This is sufficient for my purposes, but may
not be for others'.
I've tested this on my NVidia Tegra TK1 device which has u-boot running
in syslinux-compatible mode.
Closes: #1411
Approved by: cgwalters
The bootloader spec says:
> `devicetree` refers to the binary device tree to use when executing the
> kernel. This also shall be a path relative to the `$BOOT` directory. This
> key is optional. Example:
> `6a9857a393724b7a981ebb5b8495b9ea/3.8.0-2.fc19.armv7hl/tegra20-paz00.dtb`
This is necessary for booting my NVidia Tegra TK1 device. It uses u-boot
with syslinux compatibility. In the syslinux files that come with the
device this is called `FDT`, but u-boot treats `FDT and `DEVICETREE` as
synonyms.
See also: [f43c401 in u-boot].
[f43c401 in u-boot]: http://git.denx.de/?p=u-boot.git;a=commit;h=f43c401b72bb0db43ab0b55c4a79e1f4889d3aa2Closes: #1411
Approved by: cgwalters
In particular I'd like to get the `--copyup` changes out for an rpm-ostree
release that will use them. But there are other good changes here, and let's
keep up a regular release train 🚄 in general.
Closes: #1413
Approved by: jlebon
Previously we were doing e.g. `ot_util_filename_validate()` specifically inline
in dirtree objects, but only *after* writing them into the staging directory (by
default). In (non-default) cases such as not using a transaction, such an object
could be written directly into the repo.
A notable gap here is that `pull-local --untrusted` was *not* doing
this verification, just checksums. We harden that (and also the
static delta writing path, really *everything* that calls
`ostree_repo_write_metadata()` to also do "structure" validation
which includes path traversal checks. Basically, let's try hard
to avoid having badly structured objects even in the repo.
One thing that sucks in this patch is that we need to allocate a "bounce buffer"
for metadata in the static delta path, because GVariant imposes alignment
requirements, which I screwed up and didn't fulfill when designing deltas. It
actually didn't matter before because we weren't parsing them, but now we are.
In theory we could check alignment but ...eh, not worth it, at least not until
we change the delta compiler to emit aligned metadata which actually may be
quite tricky. (Big picture I doubt this really matters much right now
but I'm not going to pull out a profiler yet for this)
The pull test was extended to check we didn't even write a dirtree
with path traversal into the staging directory.
There's a bit of code motion in extracting
`_ostree_validate_structureof_metadata()` from `fsck_metadata_object()`.
Then `_ostree_verify_metadata_object()` builds on that to do checksum
verification too.
Closes: #1412
Approved by: jlebon
While we do protect against path traversal during pull, let's also validate
during checkout; it's a cheap operation and provides good last-mile protection.
Closes: #1412
Approved by: jlebon
Previously when initramfs-* was not found in a deployment's
boot directory, it was assumed that rootfs is prepared for
ostree booting by a kernel patch.
With this patch, the behaviour changes to be - if initramfs-*
is not found, assume that system is using a static
ostree-prepare-root as init process. Booting without initramfs
is a common use case on embedded systems. This approach is
also more convenient, than having to patch the kernel.
Closes: #1401
Approved by: cgwalters
Allways include ostree-repo-pull-private.h to get rid of the following
build error when HAVE_LIBCURL_OR_LIBSOUP is not defined:
src/libostree/ostree-repo-pull.c:1493:1: error: no previous prototype
for '_ostree_repo_verify_bindings' [-Werror=missing-prototypes]
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1389
Approved by: cgwalters
Let's do a new release with the locking preview, the http2 disable options and
other misc bugfixes to close out the year.
Closes: #1386
Approved by: jlebon
It'd all be really nice if there was some sort of `O_TMPFILE` for symlinks, but
anyways the way we were doing a generic "make temp file than rename" actually
defeats some of the point of `O_TMPFILE`. It's now fully safe to do "copy to
self", so let's do that for regfiles.
Closes: #1378
Approved by: jlebon
For the [rpm-ostree jigdo ♲📦](https://github.com/projectatomic/rpm-ostree/issues/1081) work.
We're basically doing "pull" via a non-libostree mechanism, and this
should be fully supported. As I mentioned earlier we should try to
have `ostree-repo-pull.c` only use public APIs; this gets us closer
to that.
Closes: #1376
Approved by: jlebon
I want some time to play with this more with different callers and work through
test scenarios. Let's disable the locking by default for now, but make it easy
to enable.
Closes: #1375
Approved by: jlebon
Try and clarify what happens with the prefixes, and that they always
return refspecs.
I’m still not 100% sure this is right.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1347
Approved by: cgwalters
It will be used by the fsck utility in future. We could expose it
publicly in future too, if needed.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1347
Approved by: cgwalters
In the non-`CONSUME` path for regfiles (which happens currently for
`bare-user`), we go to a lot of contortions to make an "object stream",
only to immediately parse it again.
Fixing this will also enable the `G_IS_FILE_DESCRIPTOR_BASED()` fast path in
commit, since the input stream will actually reference the file descriptor and
not be an `_OstreeChainInputStream`.
There's a slight concern here in that we're no longer checksumming *literally*
the object stream passed in for the stream case, but I mention in the comment,
the data should be the same, and if it's not somehow we're not adding risk,
since the checksum is still covering the data we actually care about.
Prep for further changes to break up the `write_content_object()` path into
separate paths for archive, as well as regfile vs symlink in non-archive.
Closes: #1371
Approved by: jlebon
A while ago I did `truncate -s 0 /path/to/repo/00/123.commit`, and expected a
checksum error, but I actually got a validation error due to us loading the
commit into a variant and trying to parse out the parent checksum, etc.
I first started by changing the `load_and_fsck_one_object()` function to
checksum before loading, but the problem is that we do a traverse of all objects
first. Fixing this is going to require an `OSTREE_REPO_COMMIT_TRAVER_FLAG_FSCK`
or something.
In the meantime at least though, let's add a public API to fsck a single object
which *does* checksum cleanly before parsing the object, and change the `fsck`
command to use it.
We then change the fsck binary to do this while iterating over the refs
and finding the commit object. This way we'll at least get a checksum
first for commit objects, even if not dirtree/dirmeta.
Closes: #1364
Approved by: jlebon
This commit fixes an infinite loop that happens if you try to list the
remotes of a repo that has a parent repo set. It also adds a unit test
to ensure the right behavior, which is that both the child remotes and
parent remotes are listed.
Closes: #1366
Approved by: cgwalters
One major thing we can do to speed up local commits is multithreading. In
preparation for that, split up the recursion function so that the subdirectory
case is separate from the content (regfile/symlink) case. Then for non-subdirs,
we can easily peel off worker threads and gather the final checksums and update
the mtree from the main thread.
The diff here looks large but it's pretty straightforward; amazingly this change
compiled the very first time I tried it!
Closes: #1365
Approved by: jlebon
This seems to work around
https://github.com/ostreedev/ostree/issues/1362
Though I'm not entirely sure why yet. But at least with this it'll be easier for
people to work around things locally.
Closes: #1368
Approved by: jlebon
Add exclusive repository locking to all the pruning entry points. This
ensures that objects and deltas will not be removed while another
process is writing to the repository.
Closes: #1343
Approved by: cgwalters
Define an auto cleanup handler for use with repo locking. This is based
on the existing auto transaction cleanup. A wrapper for
ostree_repo_lock_push() is added with it. The intended usage is like so:
g_autoptr(OstreeRepoAutoLock) lock = NULL;
lock = ostree_repo_auto_lock_push (repo, lock_type, cancellable, error);
if (!lock)
return FALSE;
The functions and type are marked to be skipped by introspection since I
can't see them being usable from bindings.
Closes: #1343
Approved by: cgwalters
Currently ostree has no method of guarding against concurrent pruning.
When there are multiple repo writers, it's possible to have a pull or
commit race against a prune and end up with missing objects.
This adds a file based repo locking mechanism. The intention is to take
a shared lock when writing objects and an exclusive lock when deleting
them. In order to make use of the locking throughout the library in a
fine grained fashion, the lock acts recursively with a stack of lock
states. If the lock becomes exclusive, it will stay in that state until
the stack is unwound past the initial exclusive push. The file locking
is similar to GLnxLockFile in that it uses open file descriptor locks
but falls back to flock when needed.
The lock also attempts to be thread safe by storing the lock state in
thread local storage with GPrivate. This means that each thread will
have an independent lock for each repository it opens. There are some
drawbacks to that, but it seemed impossible to manage the lock state
coherently in the face of multithreaded access.
The API is a push/pop interface in accordance with the recursive nature
of the locking. The push interface uses an enum that's translated to
LOCK_SH or LOCK_EX as needed. Both interfaces use an internal timeout
field to decide whether to manage the lock in a blocking or non-blocking
fashion. The intention is to allow ostree applications as well as
administrators to control this timeout. For now, the default is a 30
second timeout.
Note that the timeout is handled synchronously in thread since the lock
is maintained in thread local storage. I.e., the thread that acquires
the lock needs to be the same thread that runs the operation. There may
be a way to offer an asynchronous version, but it's not clear exactly
how that would work since it would likely involve a separate thread that
invokes a callback when the locking operation completes.
https://bugzilla.gnome.org/show_bug.cgi?id=759442Closes: #1343
Approved by: cgwalters
I was getting a bare `error: Creating temp file: No such file or directory` when
debugging `test-concurrency.py`; with this I get
`error: Writing content object: Creating temp file: No such file or directory`
which helps me pin it down.
Closes: #1343
Approved by: cgwalters
For rpm-ostree I'd like to do importing in parallel with threads; the code is
*almost* ready for that except today it calls
`ostree_repo_transaction_set_ref()`.
Looking at the code, there's really a "transaction" struct here,
not just stats. Let's lift that struct out, and move the refs
into it under the existing lock.
Clarify the documentation around multithreading for various functions.
Closes: #1358
Approved by: jlebon
Time to cut a new release, we've got the libcurl cleanup ordering patch which
several people have hit, along with safe early fixes for tmpdir cleanup. Let's
try to land the locking PR early next cycle.
Closes: #1359
Approved by: jlebon
I was seeing the `Writing OSTree commit...` phase of rpm-ostree
being very slow lately. This turns out to be more fallout from
https://github.com/ostreedev/ostree/pull/1170
AKA commit: 8fe4536
Loading the xattrs is slow on my system (F27AW, XFS+LVM, NVMe). I haven't fully
traced through why, but AIUI at least on XFS the xattrs are often stored outside
of the inode so it's a little bit like doing an `open()+read()`. Plus there's
the LSM overhead, etc.
The thing is that for rpm-ostree's package layering use case, we
basically always want to treat the on-disk state as canonical. (There's
a subtle case here if one does overrides for something that contains
policy but we'll fix that).
Anyways, so we're in a state now where we do the slow but correct thing by
default, which seems sane. But let's allow the app to opt-in to telling us
"really trust devino". The difference between a `stat()` + hash table lookup
versus the full xattr load on my test case of `rpm-ostree install
./tree-1.7.0-10.fc27.x86_64.rpm` is absolutely dramatic; consistently on the
order of 10s without this support, and <1s with (800ms).
Closes: #1357
Approved by: jlebon
This squashes the last race condition I was actively hitting while running
`test-concurrency.py` in a loop. The race is when process A finds a tmpdir to
reuse, and goes to lock it. Meanwhile process B deletes it and unlocks the lock.
Process A then succeeds at grabbing a lock, but the tmpdir is deleted.
Closes: #1352
Approved by: dbnicholson
Previously we'd delete the tmpdir in `rename_pending_loose_objects()`
but do the unlock inside `ostree_repo_commit_transaction()`. Move
them into the same place in the latter function for consistency.
Doesn't fix anything, just a cleanup while reading the code and
working on `test-concurrency.py`.
Closes: #1352
Approved by: dbnicholson
Prep for future work here; let's cleanly separate the path for cleaning up the
txn staging directories from the code that cleans up "other stuff". Currently
only the former case uses the `GLnxLockFile` etc.
Closes: #1352
Approved by: dbnicholson
This closes a race condition I was seeing with `test-concurrency.py`. If we
don't have `O_TMPFILE` (or for symlinks) we'll create temporary files;
previously these would be subject to the date-based pruning because we set the
timestamp to 0 for objects.
Having our temporary files also in the txn staging dir ensures that they're
covered by the locking we do for that directory, and it's also generally cleaner
since the lifecycle of all the temporary data for a txn is in one place.
Closes: #1352
Approved by: dbnicholson
This lowers into the commit core what the static delta code
was doing, and improves the API.
The bigger picture issue is that for writing large files, our current "pull" API
where the caller provides a `GInputStream` is very awkward in some scenarios.
For example, we have a whole "libarchive input stream" that is a ~200 line
GObject that boils down to wrapping `archive_read_data()`.
This came more to a head when I was working on rpm-ostree jigdo since I had to
copy that object.
One step we can take after this is to further split `write_content_object()`
into a "write symlink or archive object" versus "write bare content object"
(it already has a mess of conditionals) and teach the latter case to call
this.
The eventual goal here is to make this API public.
Closes: #1355
Approved by: jlebon
For situations where fsync is disabled, there's basically
no reason to do the whole "staging directory" dance. Just
write directly into the repo.
Today I use `fsync=false` for my build/cache repos.
I briefly considered not allocating a tmpdir at all
in this case, but we actually do want the txn tmpdir
for the non-`O_TMPFILE` case.
Part of https://github.com/ostreedev/ostree/issues/1184Closes: #1354
Approved by: giuseppe
When using dynamic remotes (LAN and USB), we cannot use their name with
the common remote related ops (ostree_repo_remote_...) because ostree
doesn't keep this type of remotes in its internal hash table.
Unfortunately this means that we cannot access the URL of those remotes
either (in order to e.g. set the right URL for those remotes in
Flatpak).
Since the URL is actually stored in a key file that belongs to the
OstreeRemote, then we can simply allow users access to it through a
getter.
So this patch adds a method that allows to return the URL directly from
the OstreeRemote without having to go through the OstreeRepo.
The test-repo-finder-config is also updated by this patch to check if
the URL is correct.
Closes: #1353
Approved by: cgwalters
They don't play nicely currently with HTTP2 where we may
have lots of requests queued.
https://github.com/ostreedev/ostree/issues/878#issuecomment-347228854
In practice anyways I think issues here are better solved on a higher level -
e.g. apps today can use an overall timeout on pulls and if they exceed the limit
set the cancellable.
Closes: #1349
Approved by: jlebon
If a newly allocated tmpdir can't be locked, set initialized to FALSE so
that glnx_tmpdir_cleanup doesn't delete it when new_tmpdir goes out of
scope.
Closes: #1346
Approved by: cgwalters
Another tmpdir user may have deleted an existing tmpdir between the time
the current user called readdir and tried to open it.
Closes: #1346
Approved by: cgwalters
By default, unless it’s const, an (out) GHashTable will be assumed to be
(transfer full). That means the binding needs to free all the items in
the hash table, plus the table itself.
However, all the GHashTables we use have free functions set already, so
freeing the hash table will free its items. This results in a
double-free.
Fix that by ensuring we annotate such (out) hash tables as (transfer
container). Also annotate some other hash tables as (transfer none)
where appropriate, for clarity.
This fixes OSTree.Repo.list_collection_refs() in the Python bindings.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1341
Approved by: dbnicholson
This reverts commit 519b30b7e1. Now that
the experimental GIR is being built correctly and OstreeRemote is a real
boxed type, this can be exposed again.
Closes: #1337
Approved by: pwithnall
Now that g-ir-scanner is being told about ENABLE_EXPERIMENTAL_API, it
can include these types correctly. Drop the __GI_SCANNER__ guards in the
header files so that all the declarations are found.
After this, you can actually construct the types normally:
>>> OSTree.CollectionRef.new('com.example.Foo', 'bar')
<OSTree.CollectionRef object at 0x7f2bba4c7528 (OstreeCollectionRef at 0x55c033ff2f30)>
Closes: #1337
Approved by: pwithnall
Without this, you can't really use OstreeRemote as a GObject, which is a
requirement for bindings.
This was found when attempting to include OstreeRemote in the GIR, and
g-ir-scanner wasn't able to link it's temporary object due to an
"undefined reference to `ostree_remote_get_type'" error.
Closes: #1337
Approved by: pwithnall
Fedora switched to 'xz' compress kernel modules, and recently
[RHEL7 did too](https://bugzilla.redhat.com/show_bug.cgi?id=1367496).
This compression defeats bsdiff.
While we have a "rollsum-able" test, we don't have a "bsdiff-able" test as it'd
be very expensive (we'd have to bsdiff, then apply it and compare the result).
Let's do the tactical quick fix here and just not try to delta files ending in
`.xz.`. This avoids us using bsdiff pointlessly for over 4000 files, which is
quite a notable speed increase for generating deltas.
Closes: #1333
Approved by: jlebon
This allows more explicit handling of commit state in code using
libostree, rather than hard-coding a commit state of 0 for ‘normal’.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1335
Approved by: cgwalters
Reorder cleanup functions so that curl_multi_cleanup() runs before
self->sockets is destroyed. This avoids an assert and invalid memory
access in sock_cb where self->sockets is dereferenced during
curl_multi_cleanup().
Closes: https://github.com/ostreedev/ostree/issues/1331Closes: #1332
Approved by: cgwalters
A tricky thing here that caused this to go past a lot of our tests
is that the code was mostly OK if there was an available delta from
an older commit. But this case broke if we e.g. had a new OS
deployment and did a `--require-static-deltas` pull, i.e. the initial
state.
I cleaned up our "find static delta state" function to return an enumeration,
and extended it with an "already have the commit" state. A problem
I then hit is that we've historically fetched detached metadata for
non-delta pulls, even if the commit hasn't changed. I decided not to
do that for `--require-static-deltas` pulls for now; otherwise the
code gets notably more complex.
Closes: https://github.com/ostreedev/ostree/issues/1321Closes: #1323
Approved by: jlebon
The main thing here is that a ton of stuff has happened in gnulib since we
imported `parse-datetime.y`. I cherry-picked a little bit of it, but that
upstream doesn't seem to build with `-Wundef`, so I just deleted some hunks.
(Note I reindented the warnings consistently)
Update submodule: libglnx
Closes: #1320
Approved by: jlebon
Since ostree_remote_get_type is not made available to g-ir-scanner, it
treats OstreeRemote as a bare struct. That's not kosher for bindings and
it issues the following warning:
src/libostree/ostree-repo-pull.c:5560: Warning: OSTree:
ostree_repo_resolve_keyring_for_collection: return value: Invalid
non-constant return of bare structure or union; register as boxed type
or (skip)
For now, just skip this API for bindings.
Closes: #1322
Approved by: pwithnall
g-ir-scanner was spitting this warning:
src/libostree/ostree-core.c:281: Warning: OSTree:
ostree_validate_collection_id: unknown parameter 'rev' in
documentation comment, should be 'collection_id'
Closes: #1322
Approved by: pwithnall
It's the slowest part, let's show admins something. This "update every 10%" code
was copied from the fsck command; obviously a better approach would be "progress
every N seconds" but doing that somewhat accurately requires making things
async; not worth it here yet.
Closes: #1314
Approved by: jlebon
I didn't fully spelunk this, but from what `static-delta-generate-crosscheck.sh`
had, we appeared to be doing this before, and it's clearly useful for local
testing rather than needing to spin up a HTTP server.
Closes: #1313
Approved by: jlebon
First, the manual crosscheck script bitrotted; it got caught up
in the "use libtest repo creation wrapper" bit, and also it
seems like at some point `pull --require-static-deltas` changed
meaning when dealing with `file:///` repos. I have more work to
unwind that.
Next, I'm seeing a delta failure which looks like a static delta
miscompilation with rollsums; change the compiler to print out
the source object too, which helped me debug this.
And finally in the processing code, fix incorrect error prefixing, which was
misleading.
Closes: #1311
Approved by: ashcrow
Fixes: 93457071cb "lib/deltas: Use pread() instead of lseek()+read()"
Caught this when trying to test alex's patch locally. I am going to review our
static delta pulls and try to get something more comprehensive locally. But in
the meantime this patch is clearly right.
Closes: #1312
Approved by: jlebon
Directly when we allocate a new part we finish the old one,
writing the compressed data to a temporary file and generating
the delta header for it.
When all these are done we loop over them and collect the headers,
sizes and either copy the tempfile data into the inlined superblock
or link the tempfiles to disk with the proper names.
Closes: #1309
Approved by: cgwalters
This allows us to create the final delta desciptor directly on disk
rather than having it all in memory. This is nice because it can
become quite large if inlined parts are used.
Note however, that we currently generate all the delta parts in
memory before adding them to the delta, so we still keep all individual
parts in memory. Fixing that is the next step.
Closes: #1309
Approved by: cgwalters
This makes the code nicer too. Properly unit testing this though really wants
like a whole set of stuff around parent repos...but we do have coverage of the
non-parent path in the current pull tests.
Closes: https://github.com/ostreedev/ostree/issues/1306Closes: #1308
Approved by: alexlarsson
For example, tmpfs or a cgroup file system. This is basically an
optimisation of the list of file systems we check for repositories,
since we would never expect any of these file systems to be capable of
containing a repository.
Depends on the new API from
https://bugzilla.gnome.org/show_bug.cgi?id=788927.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1307
Approved by: cgwalters
These two code paths tried to propagate errors which had never been set.
Set new errors instead.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1303
Approved by: cgwalters
A GVariantIter* was being passed to a GVariant format string varargs,
rather than a GVariantIter**. This resulted in memory corruption.
So we can continue to reuse ref_map throughout the function, make it a
GVariantIter* rather than a stack-allocated GVariantIter.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1301
Approved by: cgwalters
This is more subtle fallout from:
https://github.com/ostreedev/ostree/pull/1170
AKA commit: 8fe4536257
Before, if we found a devino cache hit, we'd use it unconditionally.
Recall that `bare-user` repositories are very special in that they're the only
mode where the on disk state ("physical state") is not the "real" state. The
latter is stored in the `user.ostreemeta` xattr. (`bare-user` repos are also
highly special in that symlinks are regular files physically, but that's not
immediately relevant here).
Since we now have `bare-user-only` for the "pure unprivileged container" case,
`bare-user` should just be used for "OS builds" which have nonzero uids (and
possibly SELinux labels etc.)
In an experimental tool I'm writing "skopeo2ostree" which imports OCI images
into refs, then squashes them together into a single final commit, we lost the
the `81` group ID for `/usr/libexec/dbus-1/dbus-daemon-launch-helper`.
This happened because the commit code was loading the "physical" disk state,
where the uid/gid are zero because that's the uid I happened to be using. We
didn't just directly do the link speedup because I was using `--selinux-policy`
which caused the xattrs to change, which caused us to re-commit objects from the
physical state.
The unit test I added actually doesn't quite trigger this, but I left
it because "why not". Really testing this requires the installed test
which uses SELinux policy from `/`.
The behavior without this fix looks like:
```
-00755 0 0 12 { [(b'user.ostreemeta', [byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x51, 0x00, 0x00, 0x81, 0xed]), (b'security.selinux', b'system_u:object_r:lib_t:s0')] } /usr/lib/dbus-daemon-helper
```
which was obviously totally broken - we shouldn't be picking up the
`user.ostreemeta` xattr and actually committing it of course.
Closes: #1297
Approved by: jlebon
Add some missing annotations and clarify that it always returns an open
repository on success.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1300
Approved by: cgwalters
This is a freeform string useful to track/display when a commit is "derived"
from some other format. For example, in the rpm-ostree test we make a
`vmcheck` ref that conceptually overlays the default ref like
`fedora-atomic:fedora/26/x86_64/atomic-host`.
My current patch sets the source title to e.g.
"Dev overlay on fedora-atomic:fedora/26/x86_64/atomic-host".
Another case I'm working on now is importing OCI images to use
as host images. For that case, the source title is
With this patch we could then set the original OCI image name + tag
as the source name, like:
"oci:cgwalters/demo-custom-fedora-atomic-host:26".
Closes: #1296
Approved by: jlebon
I was trying to use this with pygobject for an OCI+ostree project, and pygobject
rejected simply assigning to the field (understandably, since it can't bind the
lifetime together).
Add a wrapper function, which is still unsafe, but hides that unsafety
where most people shouldn't find it. And if they do...well, sorry,
Rust wasn't invented when ostree was started.
Closes: #1295
Approved by: pwithnall
I'm playing around with some ostree ⇔ OCI/Docker bits, and ran
into this while importing an OCI image that built from the Fedora
base image where `/home` is a regular directory, and I added a layer
that did the ostree bits of moving it to `/var` and leaving a symlink.
OCI/Docker supports this. Now since "process whiteouts" is really the
"enable OCI/Docker" mode, let's only replace dirs if that's enabled.
This leaves the `UNION_FILES` targeted for its original use case
which is unioning components/packages. (Although that use case itself
is now a bit superceded by `UNION_IDENTICAL`, but eh).
Closes: #1294
Approved by: jlebon
This is another OstreeRepoFinder implementation; it returns results from
a given set of URIs. It’s designed to be used for implementing user
overrides to other repo-finders, or for implementing unit tests.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1281
Approved by: mwleeds
Use g_variant_iter_loop() rather than next(), since it automatically
handles freeing the child memory each iteration. Previously, we leaked
it for all but the last iteration.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Closes: #1293
Approved by: cgwalters
Change the regexp for validating refs to require at least one letter or digit
before allowing the other special chars in the set `[.-_]`. Names that start
with `.` are traditionally Unix hidden files; let's ignore them under the
assumption they're metadata for some other tool, and we don't want to
potentially conflict with the special `.` and `..` Unix directory entries.
Further, names starting with `-` are problematic for Unix cmdline option
processing; there's no good reason to support that. Finally, disallow `_` just
on general principle - it's simpler to say that ref identifiers must start with
a letter or digit.
We also ignore any existing files (that might be previously created refs) that
start with `.` in the `refs/` directory - there's a Red Hat tool for content
management that injects `.rsync` files, which is why this patch was first
written.
V1: Update to ban all refs starting with a non-letter/digit, and
also add another call to `ostree_validate_rev` in the pull
code.
Closes: https://github.com/ostreedev/ostree/issues/1285Closes: #1286
Approved by: jlebon
The way `_ostree_repo_open_content_bare()` did both looking for the object and
possibly creating a new fd was just weird and inconsistent with e.g. the pull
code where we always call `has_object()` first.
Just call `has_object()` in the delta paths that used this too, making the
implementation right now a thin wrapper around
`glnx_open_tmpfile_linkable_at()`, but this is prep for a later patch which does
more.
Closes: #1283
Approved by: jlebon
This is another case where making an input stream out of a memory buffer is a
bit silly; just hash the `GBytes` directly.
Closes: #1287
Approved by: jlebon
A side effect of commit 8fe4536257 is that
we started listing all xattrs even for files with device/inode matches;
further, we did that using the dfd/name which means we went through
the `/proc` path, which is slower and uglier.
Noticed this in strace while looking at adoption code.
Closes: #1280
Approved by: jlebon
That's why the syscall was invented, so let's use it. Just noticed while reading
the code while working on another patch.
Closes: #1270
Approved by: jlebon
This isn't perfect, but at least we fix an error-overwrite error, and in
practice `ostree admin unlock` isn't wrapped by `rpm-ostree` yet, so spew to
stderr is OK.
Closes: https://github.com/ostreedev/ostree/issues/1273Closes: #1279
Approved by: guyshapiro
For checkouts that are on the same device, for regular files we can simply
"adopt" existing files. This is useful in the "build from subtrees" pattern that
happens with e.g. `rpm-ostree install` as well as flatpak and gnome-continuous.
New files are things like an updated `ldconfig` cache, etc. And particularly for
`rpm-ostree` we always regenerate the rpmdb, which for e.g. this workstation is
`61MB`.
We probably should have done this from the start, and instead had a `--copy`
flag to commit, but obviously we have to be backwards compatible.
There's more to do here - the biggest gap is probably for `bare-user` repos,
which are often used with things like `rpm-ostree compose tree` for host
systems. But we can do that later.
Closes: #1272
Approved by: jlebon
I was working on a patch to do build on the work done to
import content objects async to do the same for metadata, but right
now we basically rely on writing them first to do the GPG verification
when scanning.
Things will be cleaner for that if we can pass the commit object directly into
`scan_commit_object()` and consistently use `gpg_verify_unwritten_commit()`.
We're careful here to continue to do it both ways (but at most one time), to
account for the case where a bad commit has been pulled and written - we need to
keep failing GPG verification there.
Closes: #1269
Approved by: jlebon
Prep for a later patch to do GPG verification before writing commit objects;
`_ostree_repo_gpg_verify_with_metadata()` already handles this, and so dropping
this gives us consistent error messages.
Closes: #1269
Approved by: jlebon
There's a subtle issue going on with the way we use `UNION_IDENTICAL`
now in rpm-ostree. Basically, the crux of the issue is that we checkout
the whole tree from the system repo, but then overlay packages by
checking out from the pkgcache repo. This is an easy way to break the
assumption that we will be merging hardlinks from the same repo.
This ends up causing issues like:
https://github.com/projectatomic/rpm-ostree/issues/1047
There, `vim-minimal` is already part of the host and has an object for
`/usr/share/man/man1/ex.1.gz`. `vim-common` has that same file, but
because it's unpacked in the pkgcache repo first, the hardlinks are not
the same.
There are a few ways we *could* work around this in rpm-ostree itself,
e.g. by re-establishing hardlinks when we do the content pull into the
system repo, but it still felt somewhat hacky. Let's just do this the
proper way and fall back to checksumming the target file if needed,
which is what librpm does as well in this case. Note that we only
checksum if they're not hard links, but they're the same size.
Closes: #1258
Approved by: cgwalters
Philip Withnall
Matthew Leeds
Colin Walters
Andrea Galbusera
Tobias Mueller
Jonathan Lebon
Sam Spilsbury
Alexander Larsson
Giuseppe Scrivano
Owen W. Taylor
Joaquim Rocha
Jeremy Hiatt
Jonathan Lebon
Marcus Folkesson
William Manley
Gatis Paeglis
Dan Nicholson
Dusty Mabe
Kalev Lember
Shaun Taheri