Lionel VITTE
5df595134e
- Allow specific partition image configuration between 'ext4' and 'ubifs'. - In case ubifs created is larger than max-leb-cnt allocated, mkfs.ubi raise an error that make bitbake exit on error: add test to avoid this unexpected exit. Change-Id: Ib386e703cfb1d0434ea17c279abb31f705514019 Signed-off-by: Romuald JEANNE <romuald.jeanne@st.com>
Summary
meta-st-stm32mp BSP layer is a layer containing the STMicroelectronics bsp metadata for current versions of stm32mp.
This layer relies on OpenEmbedded/Yocto build system that is provided through Bitbake and OpenEmbedded-Core layers or Poky layer all part of the Yocto Project
The Yocto Project has extensive documentation about OE including a reference manual which can be found at:
For information about OpenEmbedded, see the OpenEmbedded website:
This layer depends on:
[OECORE]
URI: https://github.com/openembedded/openembedded-core.git
layers: meta
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
[BITBAKE]
URI: https://github.com/openembedded/bitbake.git
branch: branch associated to oecore branch
revision: HEAD
or
[OECORE]
URI: git://git.yoctoproject.org/poky
layers: meta
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
[META-OPENEMBEDDED]
URI: git://github.com/openembedded/meta-openembedded.git
layers: meta-python meta-oe
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
The dependency (meta-python) are due to the usage of OPTEE which require to use some python packages.
EULA
Some SoC depends on firmware and/or packages that are covered by STMicroelectronics EULA. To have the right to use those binaries in your images you need to read and accept the EULA available as:
conf/eula/$MACHINE, e.g. conf/eula/stm32mp1
In order to accept it, you should add, in your local.conf file:
ACCEPT_EULA_$MACHINE = "1", e.g.: ACCEPT_EULA_stm32mp1 = "1"
If you do not accept the EULA the generated image will be missing some components and features.
Contributing
If you want to contribute changes, you can send Github pull requests at https://github.com/stmicroelectronics/meta-st-stm32mp/pulls.
Maintainers
- Christophe Priouzeau christophe.priouzeau@st.com
- Sebastien Gandon sebastien.gandon@st.com
- Bernard Puel bernard.puel@st.com