Romuald JEANNE
af5ae28215
Several updates integrated: - removal of no more supported basic boot scheme - removal of no more supported boot device (nor-nand and nor-emmc) - rework of providers and machine features - introduction of new board versions (a, c, d, f) - update of extlinuxconf-stm32mp class to manage multiple board versions - configure 'extlinux.conf' file to manage PARTUUID to select rootfs partition - new partition images management (easy to add or remove partition through new PARTITIONS_CONFIG var - specific configuration on machine side for all storage device supported Change-Id: I7e4d3d16535a5654c7fd80f9b56296a61050def3
Summary
meta-st-stm32mp BSP layer is a layer containing the STMicroelectronics bsp metadata for current versions of stm32mp.
This layer relies on OpenEmbedded/Yocto build system that is provided through Bitbake and OpenEmbedded-Core layers or Poky layer all part of the Yocto Project
The Yocto Project has extensive documentation about OE including a reference manual which can be found at:
For information about OpenEmbedded, see the OpenEmbedded website:
This layer depends on:
[OECORE]
URI: https://github.com/openembedded/openembedded-core.git
layers: meta
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
[BITBAKE]
URI: https://github.com/openembedded/bitbake.git
branch: branch associated to oecore branch
revision: HEAD
or
[OECORE]
URI: git://git.yoctoproject.org/poky
layers: meta
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
[META-OPENEMBEDDED]
URI: git://github.com/openembedded/meta-openembedded.git
layers: meta-python meta-oe
branch: same dedicated branch as meta-st-stm32mp
revision: HEAD
The dependency (meta-python) are due to the usage of OPTEE which require to use some python packages.
EULA
Some SoC depends on firmware and/or packages that are covered by STMicroelectronics EULA. To have the right to use those binaries in your images you need to read and accept the EULA available as:
conf/eula/$MACHINE, e.g. conf/eula/stm32mp1
In order to accept it, you should add, in your local.conf file:
ACCEPT_EULA_$MACHINE = "1", e.g.: ACCEPT_EULA_stm32mp1 = "1"
If you do not accept the EULA the generated image will be missing some components and features.
Contributing
If you want to contribute changes, you can send Github pull requests at https://github.com/stmicroelectronics/meta-st-stm32mp/pulls.
Maintainers
- Christophe Priouzeau christophe.priouzeau@st.com
- Sebastien Gandon sebastien.gandon@st.com
- Bernard Puel bernard.puel@st.com